Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Calibrating Instrument for Tool Wear using Spindle Orientation Function in End Milling

엔드밀 가공시 주축 오리엔테이션 기능을 통한 공구마멸 보정 장치의 개발

  • Published : 2003.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

The most important thing in measuring the tool wear is to set up the measurement base. The end mill that is being used for machining of die is difficult to set up the base and to measure the tool wear because of geometric properties of that such as a helix and relief angle. In this study, a new instrument using spindle orientation function in end milling is developed to measure the tool wear and evaluated by the measuring system on the machine. Finally, this new method makes possible the wear measurement of same position and reduces the measuring time compared with the measuring methods such as the microscope and CCD.

Keywords

References

  1. Iwabe, H. and Fujii, Y, 1990, 'Study on Cutting Mechanism of Different Helix Angles End Mills,' JSPE, Vol. 10, pp. 1889-1893
  2. Ko, S. L., Lee, S. K. and Bae, S. M., 2001, 'Study on the Design of End Mill Geometry,' KSPE, Vol. 18, No. 8, pp. 24-31
  3. Martin, K. F., 1994, 'A Review by Riscussion of Condition Monitoring and Fault Diagnosis in Machine Tools,' International Journal of Machine Tools & Manufacture, Vol. 34, No. 4, pp. 527-551 https://doi.org/10.1016/0890-6955(94)90083-3
  4. Pfeifer, T. and Wiegers, L., 2000, 'Reliable Tool Wear Monitoring by Optimized Image and Illumination Control in Machine Vision,' Measurement, Vol. 28, No. 3, pp. 209-218 https://doi.org/10.1016/S0263-2241(00)00014-2
  5. Roget, J., 1986, 'Use of Acoustic Emission for Inprocess Monitoring of Tool during Turning and Milling,' Progress in Acoustic Emission III. The Japanese Society for NDI, pp. 94-101
  6. Lee, K. Y., Ha, G. H., Kang, M. c.. Lee, D. W. and Kim, J. S., 2000, 'Prediction of Surface Topography by Dynamic Model in High Speed End Milling,' KSME, Vol. 24, No. 7, pp. 1681-1688
  7. Wilcox, S. J., Reuben, R. L. and Souquet, P., 1997, 'The Use of Cutting Force and Acoustic Emission Signals for the Monitoring of Tool Insert Geometry during Rough Face Milling,' International Journal of Machine Tools & Manufacture, Vol. 37, No. 4, pp. 481-494 https://doi.org/10.1016/S0890-6955(96)00069-7
  8. John, T. R. and Sudhakar, M. P., 1998, 'Early Prediction of Impending End Milling Tool Failure using Acceleration Signals,' Transactions of NAMRI/SME, Vol. 26, pp. 243-248