Browse > Article
http://dx.doi.org/10.3795/KSME-A.2003.27.7.1095

Development of Calibrating Instrument for Tool Wear using Spindle Orientation Function in End Milling  

Kim, Jeon-Ha (부산대학교 대학원 기계공학과)
Kang, Myung-Chang (부산대학교 기계공학부)
Kim, Jeong-Suk (부산대학교 기계공학부)
Kim, Kwang-Ho (부산대학교 재료공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.27, no.7, 2003 , pp. 1095-1102 More about this Journal
Abstract
The most important thing in measuring the tool wear is to set up the measurement base. The end mill that is being used for machining of die is difficult to set up the base and to measure the tool wear because of geometric properties of that such as a helix and relief angle. In this study, a new instrument using spindle orientation function in end milling is developed to measure the tool wear and evaluated by the measuring system on the machine. Finally, this new method makes possible the wear measurement of same position and reduces the measuring time compared with the measuring methods such as the microscope and CCD.
Keywords
Flat End Mill; Spindle Orientation; Calibration; Tool Wear; Slenderness Ratio; BT Type Tool Holder;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Wilcox, S. J., Reuben, R. L. and Souquet, P., 1997, 'The Use of Cutting Force and Acoustic Emission Signals for the Monitoring of Tool Insert Geometry during Rough Face Milling,' International Journal of Machine Tools & Manufacture, Vol. 37, No. 4, pp. 481-494   DOI   ScienceOn
2 Iwabe, H. and Fujii, Y, 1990, 'Study on Cutting Mechanism of Different Helix Angles End Mills,' JSPE, Vol. 10, pp. 1889-1893
3 Ko, S. L., Lee, S. K. and Bae, S. M., 2001, 'Study on the Design of End Mill Geometry,' KSPE, Vol. 18, No. 8, pp. 24-31   과학기술학회마을
4 Martin, K. F., 1994, 'A Review by Riscussion of Condition Monitoring and Fault Diagnosis in Machine Tools,' International Journal of Machine Tools & Manufacture, Vol. 34, No. 4, pp. 527-551   DOI   ScienceOn
5 Pfeifer, T. and Wiegers, L., 2000, 'Reliable Tool Wear Monitoring by Optimized Image and Illumination Control in Machine Vision,' Measurement, Vol. 28, No. 3, pp. 209-218   DOI   ScienceOn
6 Roget, J., 1986, 'Use of Acoustic Emission for Inprocess Monitoring of Tool during Turning and Milling,' Progress in Acoustic Emission III. The Japanese Society for NDI, pp. 94-101
7 Lee, K. Y., Ha, G. H., Kang, M. c.. Lee, D. W. and Kim, J. S., 2000, 'Prediction of Surface Topography by Dynamic Model in High Speed End Milling,' KSME, Vol. 24, No. 7, pp. 1681-1688   과학기술학회마을
8 John, T. R. and Sudhakar, M. P., 1998, 'Early Prediction of Impending End Milling Tool Failure using Acceleration Signals,' Transactions of NAMRI/SME, Vol. 26, pp. 243-248