• Journal of environmental and Sanitary engineering
• /
• v.22 no.3
• /
• pp.27-33
• /
• 2007

M. incognita are plant-parasite nematode that cause severe damage to the crops. P. lilacinus are renowned for inhibitation of development of M. incognita's egg. We make a study for enzymatic examining the cause closely that P. lilacinus suppress development of M. incognita's egg by parasiting. The research result is explained the place below. 1. The egg that is exposed to co-enzymes which are cultured in the broth culture starts to change the membrane of egg from 3days. And in 10days, that membrane completely disappear. These are observed through light microscope. Therefore, we know that M. incongnita are controlled by extracellular lytic enzymes that are produced by P. lilacinus. 2. Through scanning electron microscope, we can find that the egg that is attacked by P. lilacinus loses it's membrane gradually, and that loss of the membrane causes transform, which suppresses the development of egg.

• Corrosion Science and Technology
• /
• v.6 no.3
• /
• pp.140-146
• /
• 2007

In the paper, with corrosion velocity measurement and metallographic observation on specimens after sulfuric acid/ferric sulfate boiling experiment, intergranular corrosion tendency of the new type ultra low carbon stainless steel developed by ourselves which experienced solution treatment at different temperatures was evaluated. A VHX 500 super depth field tridimensional microscope was used to observe corrosion patterns on the sample surfaces. The depth and width of grain boundary corrosion groove were measured by the tridimensional microscope, which indicated that the corrosion degrees of the samples which received solution treatment at different temperatures are quite different. Transgranular corrosion at different degree occurred along with forged glide lines. After comparison it was proved that the stainless steel treated at $1100^{\circ}C$ performs very well against intergranular corrosion.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.532-535
• /
• 2000

Optical microscope, SEM and fluorescent microscope were used for qualitative and morphological studies of the attachment bacteria on PE substratum under anaerobic condition. The observation of optical microscopic has demonstrated that the initial attachment of bacteria began in crevices of surface. In SEM photographs, shape and structure of biofilm could be observed, but bacteria species and methanogens was not identified. A large number of methanogenic bacteria were showed on the surface of PE substratum by fluorescence under 480nm of radiation. It was estimated that methanogenic bacteria was related to initial attachment of bacteria under anaerobic condition.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.6
• /
• pp.344-349
• /
• 2010

Silicon carbide nanowires were grown by heat treatment of the films at $1200^{\circ}C$ after amorphous SiC thin films were deposited on graphite substrate by radio frequency magnetron sputtering at $600^{\circ}C$. It was confirmed that SiC nanowires with the diameter of 20-60 nm and length of about 50nm were grown from Field Emission Scanning Election Microscope (FE-SEM) and Transmission Election Microscope (TEM) observation. The diameter of nanowires was increased as heat treatment time is increased. The nanowires were identified to ${\beta}$-SiC single crystalline from X-Ray Diffraction(XRD) analysis. It was observed from this study that deposition temperature of samples was critical to the crystallization of nanowires. On the other hand, the effect of deposition time was insignificant.

• The Journal of Korean Medicine
• /
• v.23 no.4
• /
• pp.27-31
• /
• 2002

Background and Purpose: There has been little study about the quality of acupuncture needle tips. In order to ensure safe acupuncture treatment, high quality of needle tips is essential. Therefore, we investigated the current condition of the tips of the acupuncture needles on the market. Methods: We selected needles made by 6 companies in Korea, one company each in Japan, the USA and China, and observed the tip of each needle using a scanning electron microscope. Results and Discussion: We found that needles had several defects such as scratch marks on the surface, metallic scuff, lumps and irregularities of the needle tips, stubbed or malformed tips, tips of point off-center, and peeled off coated tips. There were more faulty ones than good ones. Further, better-designed study with a bigger sample size is warranted.

• Korean Journal of Veterinary Research
• /
• v.24 no.2
• /
• pp.227-236
• /
• 1984

A migratory bird, the white stork, Ciconia boyciana was captured from a pond in the Cheju Island on the 18th of December in 1982. The morphological characteristics were described as seen in the binocular stereoscopic microscope and the further fine structures were observed by means of the scanning electron microscope (Model; ISI-DS-130). The bird was examined for the ectoparasites at the Cheju Provincial Veterinary Research Laboratory. Two kinds of specimens were collected from the head and body feathers. The specimens were sent to the Institute of Veterinary Research in Anyang for the classification and identification. The specimens preserved in 70% ethyl alcohol were examined and identified as the fowl head-louse, Cuclotogaster heterographus and the slender goose-louse, Anaticola anseris both classified into Family Philopteridae, Ischnocera, Order Mallophaga.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.135-140
• /
• 2017

This paper is on a study for discrimination on relative sequence as a most actively discussed topic in forensic document fields. This paper describes the application of the visual spectral comparator and infinite focus microscope as observation methods for overlapping region of printing and writing lines. As a result, we could categorize overlapping region images and identify the sequence of printing and writing lines by various inks.

• Journal of the Korean Ceramic Society
• /
• v.33 no.1
• /
• pp.92-100
• /
• 1996

Amorphous alumina(AA) the precursor of ${\gamma}$-alumina for catalyst support was made in the newly designed ball filled heating column. Some properties of AA as precursor were investigated. In observation of microstruc-ture and pore structure of AA and its derivatives scanning electronic microscope(SEM) and transmission electronic microscope(TEM) were used. It was found that the width of one particle in AA was 45~60$\AA$ and the average distance among the particles ranged 9~12 $\AA$ which suggested a micropore structure. When AA was reacted with water the shape of the surface was found to be altered and acicular bioehmite was formed inside AA which contributed inproved formability. Pore distribution was evaluated for the three samples of AA ground and granulated lump and La2O3 coated alumina. Acid sites were quantitatively determined by ammonia TPD method and the effect of impurity of Na on acid sites was discussed. Water adsorption capacity was evaluated in terms of a desiccant.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.495-499
• /
• 2014

In this paper, a method is proposed for simultaneously measuring the front and back surface profiles of transparent micro-optical components. The proposed method combines a dual-wavelength digital holographic microscope with liquids to record holograms at different wavelengths, and then numerically reconstructs the three-dimensional phase information to image the front and back sides of the sample. A theoretical model is proposed to determine the surface information, and imaging of an achromatic lens is demonstrated experimentally. Unlike conventional interferometry, our proposed method supports nondestructive measurement and direct observation of both front and back profiles of micro-optical elements.

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.525-529
• /
• 2017

To improve the thermal resistance of a porous borosilicate lining block, we prepared and applied polysiloxane-fumed silica-ethanol slurry on top of the block and fired the coating layer using a torch for 5 minutes at $800^{\circ}C$. We conducted magnified characterizations using a microscope and XRD analysis to observe phase transformations, and TGA-DTA analysis to determine the thermal resistance. Thermal characterizations showed improved heat resistance with relatively high polysiloxane content slurry. Cross-sectional optical microscope observation showed less melting near the surface and decreased pore formation area with higher polysiloxane content slurry. XRD analysis revealed that the block and coating layer were amorphous phases. TGA-DTA analysis showed an endothermic reaction at around $550^{\circ}C$ as the polysiloxane in the coating layer reacted to form SiOC. Therefore, coating polysiloxane on a borosilicate block contributes to preventing the melting of the block at temperatures above $800^{\circ}C$.