Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Properties of Polysiloxane Coated Borosilicate Lining Blocks

  • Song, Jeongho (Department of Materials Science and Engineering, University of Seoul) ;
  • Song, Ohsung (Department of Materials Science and Engineering, University of Seoul)
  • Received : 2017.08.29
  • Accepted : 2017.10.17
  • Published : 2017.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

To improve the thermal resistance of a porous borosilicate lining block, we prepared and applied polysiloxane-fumed silica-ethanol slurry on top of the block and fired the coating layer using a torch for 5 minutes at $800^{\circ}C$. We conducted magnified characterizations using a microscope and XRD analysis to observe phase transformations, and TGA-DTA analysis to determine the thermal resistance. Thermal characterizations showed improved heat resistance with relatively high polysiloxane content slurry. Cross-sectional optical microscope observation showed less melting near the surface and decreased pore formation area with higher polysiloxane content slurry. XRD analysis revealed that the block and coating layer were amorphous phases. TGA-DTA analysis showed an endothermic reaction at around $550^{\circ}C$ as the polysiloxane in the coating layer reacted to form SiOC. Therefore, coating polysiloxane on a borosilicate block contributes to preventing the melting of the block at temperatures above $800^{\circ}C$.

Keywords

References

  1. S. W. Youn, Y. L. Shin, and C. G. Kang, "A Study on the Nano-Deformation Behaviors of Single Crystal Silicon and Amorphous Borosilicate Considering the Mechanochemical Reaction," Trans. Mater. Process., 12 [7] 623-30 (2003). https://doi.org/10.5228/KSPP.2003.12.7.623
  2. S. Zhao, Y. Zhao, Y. Han, C. An, J. Wei, and Y. Yao, "Prevention of Stack Corrosion under Wet Flue Gas Desulfurization Conditions in a Coal-Fired Power Plant: Performance Analysis and Comparative Study," Environ. Syst. Res., 5 [1] 21-31 (2016). https://doi.org/10.1186/s40068-016-0072-3
  3. I. H. Back, H. B. Lim, and C. Y. Kim, "Mechanism of Removal of Cr(VI) Ions from Solution by Borosilicate Glasses Containing Alkaline Earth Oxides," J. Korean Ceram. Soc., 48 [3] 222-27 (2011). https://doi.org/10.4191/KCERS.2011.48.3.222
  4. Y. S. Song, H. O. Kwan, and N. I. Jho, "Evaluation of the Organic Linings at Gas Desulfurization System," J. Kor. Soc. Precis. Eng., 29 [11] 1178-82 (2012). https://doi.org/10.7736/KSPE.2012.29.11.1178
  5. B. V. Manoj Kumar and Y. W. Kim, "Processing of Polysiloxane-Derived Porous Ceramics: A Review," Sci. Technol. Adv. Mater., 11 [4] 044303-18 (2010). https://doi.org/10.1088/1468-6996/11/4/044303
  6. P. Colombo, G. Mera, R. Riedel, and G. D. Soraru, "Polymer-Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics," J. Am. Ceram. Soc., 93 [7] 1805-37 (2010).
  7. M. Narsawa, "Silicone Resin Applications for Ceramic Precursors and Composites," Materials, 3 [6] 3518-36 (2010). https://doi.org/10.3390/ma3063518
  8. C. Moysan, R. Riedel, R. Harshe, T. Rouxel, and F. Augereau, "Mechanical Characterization of a Polysiloxane-Derived SiOC Glass," J. Eur. Ceram. Soc., 27 [1] 397-403 (2007). https://doi.org/10.1016/j.jeurceramsoc.2006.01.016
  9. Y. I. Lee, J. H. Eom, Y. W. Kim, and I. H. Song, "Effect of Additive Composition on Flexural Strength of Cullet-Losses Tile Bodies," J. Korean Ceram. Soc., 50 [6] 416-22 (2013). https://doi.org/10.4191/kcers.2013.50.6.416
  10. R. Harshe, C. Balan, and R. Riedel, "Amorphous Si(Al)OC Ceramic from Polysiloxanes: Bulk Ceramic Processing, Crystallization Behavior and Applications," J. Eur. Ceram. Soc., 24 [12] 3471-82 (2004). https://doi.org/10.1016/j.jeurceramsoc.2003.10.016
  11. K. J. Kim, J. H. Eom, Y. W. Kim, and W. S. Seo, "Electrical Conductivity of Dense, Bulk Silicon-Oxycarbide Ceramics," J. Eur. Ceram. Soc., 35 [5] 1355-60 (2015). https://doi.org/10.1016/j.jeurceramsoc.2014.12.007
  12. D. W. Kim, Synthesis of Porous SiC Ceramics from a Polysiloxane (in Korean), pp. 28-30, in M. S. Thesis, Korea Maritime and Ocean University, Busan, 2007.
  13. Y. W. Kim, D. H. Jang, J. H. Eom, I. H. Song, and H. D. Kim, "Processing of Polymer-Derived Microcellular Ceramics Containing Reactive Fillers," Mater. Sci. Forum, 534-536 989-92 (2007). https://doi.org/10.4028/www.scientific.net/MSF.534-536.989

Cited by

  1. Properties of foamed glass upon addition of nanocarbon and sintering temperatures vol.8, pp.1, 2017, https://doi.org/10.1080/21870764.2020.1712798
  2. Properties of basalt-fiber reinforced foam glass vol.8, pp.1, 2017, https://doi.org/10.1080/21870764.2020.1718858
  3. Properties of foamed glass upon addition of polysiloxane vol.8, pp.3, 2017, https://doi.org/10.1080/21870764.2020.1794531