• Restorative Dentistry and Endodontics
• /
• 제46권2호
• /
• pp.30.1-30.13
• /
• 2021

Objectives: This study was conducted to compare the microleakage and characteristics of the resin-tooth tissue interface between self-etch and etch-and-rinse adhesive systems after 48 hours and 3 months. Materials and Methods: 40 extracted premolar teeth were randomly divided into 2 groups: 1-step self-etch adhesive system - Optibond^TM All-In-One, and 2-step etch-and-rinse adhesive system - Adper^TM Single Bond 2. Both groups were subjected to 500 thermocycles (5℃-55℃) before scanning electron microscope (SEM) analysis or microleakage trial at 48-hour and 3-month time periods. Results: SEM images showed the hybrid layer thickness, diameter, and length of resin tags of the self-etch adhesive (0.42 ± 0.14 ㎛; 1.49 ± 0.45 ㎛; 16.35 ± 14.26 ㎛) were smaller than those of the etch-and-rinse adhesive (4.39 ± 1.52 ㎛; 3.49 ± 1 ㎛; 52.81 ± 35.81 ㎛). In dentin, the microleakage scores of the 2 adhesives were not different in both time periods (48 hours/3 months). However, the microleakage score of etch-and-rinse adhesive increased significantly after 3 months (0.8 ± 0.63 and 1.9 ± 0.88, p < 0.05). Conclusions: The self-etch adhesive exhibited better long-term sealing ability in dentin when compared to that of the etch-and-rinse adhesive. The greater hybrid layer thickness and dimensions of resin tags did not guarantee reliable, long-lasting sealing in the bonding area.

• Restorative Dentistry and Endodontics
• /
• 제47권2호
• /
• pp.16.1-16.9
• /
• 2022

Objectives: This study compared the cyclic fatigue resistance of One Curve (C wire) and F6 Skytaper (conventional austenite nickel-titanium [NiTi]), and 2 instruments with thermos-mechanically treated NiTi: Protaper Next X2 (M wire) and Hyflex CM (CM wire). Materials and Methods: Ten new instruments of each group (size: 0.25 mm, 6% taper in the 3 mm tip region) were tested using a rotary bending machine with a 60° curvature angle and a 5 mm curvature radius, at room temperature. The number of cycles until fracture was recorded. The length of the fractured instruments was measured. The fracture surface of each fragment was examined with a scanning electron microscope (SEM). The data were analyzed using one-way analysis of variance and the post hoc Tukey test. The significance level was set at 0.05. Results: At 60°, One Curve, F6 Skytaper and Hyflex CM had significantly longer fatigue lives than Protaper Next X2 (p < 0.05). No statistically significant differences were found in the cyclic fatigue lives of One Curve, F6 Skytaper, and Hyflex CM (p > 0.05). SEM images of the fracture surfaces of the different instruments showed typical features of fatigue failure. Conclusions: Within the conditions of this study, at 60° and with a 5 mm curvature radius, the cyclic fatigue life of One Curve was not significantly different from those of F6 Skytaper and Hyflex CM. The cyclic fatigue lives of these 3 instruments were statistically significantly longer than that of Protaper Next.

• Restorative Dentistry and Endodontics
• /
• 제45권4호
• /
• pp.44.1-44.9
• /
• 2020

Objectives: Phytic acid (IP6), a naturally occurring agent, has been previously reported as a potential alternative to ethylenediaminetetraacetic acid (EDTA). However, its effect on adhesion to sodium hypochlorite (NaOCl)-treated dentin and its interactions with NaOCl have not been previously reported. Thus, in this study, the effects of IP6 on resin adhesion to NaOCl-treated dentin and the failure mode were investigated and the interactions between the used agents were analyzed. Materials and Methods: Micro-tensile bond strength (µTBS) testing was performed until failure on dentin treated with either distilled water (control), 5% NaOCl, or 5% NaOCl followed with chelators: 17% EDTA for 1 minute or 1% IP6 for 30 seconds or 1 minute. The failed specimens were assessed under a scanning electron microscope. The reaction of NaOCl with EDTA or IP6 was analyzed in terms of temperature, pH, effervescence, and chlorine odor, and the effects of the resulting mixtures on the color of a stained paper were recorded. Results: The µTBS values of the control and NaOCl with chelator groups were not significantly different, but were all significantly higher than that of the group treated with NaOCl only. In the failure analysis, a distinctive feature was the presence of resin tags in samples conditioned with IP6 after treatment with NaOCl. The reaction of 1% IP6 with 5% NaOCl was less aggressive than the reaction of the latter with 17% EDTA. Conclusions: IP6 reversed the adverse effects of NaOCl on resin-dentin adhesion without the chlorine-depleting effect of EDTA.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.150-150
• /
• 2022

Plant reproduction associated with crop yields is highly vulnerable to global climate change components such as high and cold temperatures. The objectives of this study were to determine the effects of season-high exposure to temperature treatments in pollen morphology on Adzuki bean (V. angularis) and Mung bean (V. radiate). V. angularis and V. radiata were treated at high temperatures in the high temperature gradient greenhouse designed to cause temperature deviation. The pollen shapes treated at high temperature were compared by an electron scanning microscope. As a result, it was confirmed that the number of abnormal pollens morphology at high temperature was the least in V. radiata, and V. angularis was vulnerable to high temperatures. Also, it was found that the number of abnormal pollen morphology atT4 (Con +5~6℃) varied according to the cultivars of V. angularis. Therefore, the differences in Vigna species or cultivars with thermo-tolerance in pollen morphology to high temperature are projected to occur in the changeable future climate.

• Restorative Dentistry and Endodontics
• /
• 제49권2호
• /
• pp.12.1-12.10
• /
• 2024

Objectives: This study evaluated the impact of different methods of irrigant agitation on smear layer removal in the apical third of curved mesial canals of 3 dimensionally (D) printed mandibular molars. Materials and Methods: Sixty 3D-printed mandibular second molars were used, presenting a 70° curvature and a Vertucci type II configuration in the mesial root. A round cavity was cut 2 mm from the apex using a trephine of 2 mm in diameter, 60 bovine dentin disks were made, and a smear layer was formed. The dentin disks had the adaptation checked in the apical third of the teeth with wax. The dentin disks were evaluated in environmental scanning electron microscope before and after the following irrigant agitation methods: G1(PIK Ultrasonic Tip), G2 (Passive Ultrasonic Irrigation with Irrisonic- PUI), G3 (Easy Clean), G4 (HBW Ultrasonic Tip), G5 (Ultramint X Ultrasonic tip), and G6 (conventional irrigation-CI) (n = 10). All groups were irrigated with 2.5% sodium hypochlorite and 17% ethylenediaminetetraacetic acid. Results: All dentin disks were 100% covered by the smear layer before treatment, and all groups significantly reduced the percentage of the smear layer after treatment. After the irrigation protocols, the Ultra-X group showed the lowest coverage percentage, statistically differing from the conventional, PIK, and HBW groups (p < 0.05). There was no significant difference among Ultramint X, PUI-Irrisonic, and Easy Clean (p > 0.05). None of the agitation methods could remove the smear layer altogether. Conclusions: Ultramint X resulted in the most significant number of completely clean specimens.

• International Journal of Stem Cells
• /
• 제16권2호
• /
• pp.202-214
• /
• 2023

Background and Objectives: To investigate the role of exosomes from periodontal ligament cells (PDLCs) in bone marrow mesenchymal stem cell (BMSC) migration. Methods and Results: Human PDLCs were applied cyclic tension stretching. Exosomes were extracted from cultured PDLCs by ultracentrifugation, then characterized for their size, morphology and protein markers by NTA, TEM and western blotting. The process that PKH26-labeled exosomes taken up by BMSCs was assessed by confocal microscope. BMSC migration was examined by Transwell assay. Exosomes derived from PDLCs were identified. Cyclic tension stretch application on PDLCs can enhance the migration ability of BMSCs through exosomes. The exosomal miRNA expression profiles of unstretched and stretched PDLCs were tested by miRNA microarray. Four miRNAs (miR-4633-5p, miR-30c-5p, miR-371a-3p and let-7b-3p) were upregulated and six (miR-4689, miR-8485, miR-4655-3p, miR-4672, miR-3180-5p and miR-4476) were downregulated in the exosomes after stretching. Sixteen hub proteins were found in the miRNA-mRNA network. Gene Ontology and KEGG pathway analyses demonstrated that the target genes of differentially expressed exosomal miRNAs closely related to the PI3K pathway and vesicle transmission. Conclusions: The exosomes derived from cyclic tension-stretched PDLCs can promote the migration of BMSCs. Alternation of microRNA profiles provides a basis for further research on the regulatory function of the exosomal miRNAs of PDLCs during orthodontic tooth movement.

• Journal of Veterinary Science
• /
• 제25권2호
• /
• pp.31.1-31.8
• /
• 2024

Background: Recently, there has been a growing interest in stem cells for human medicine. Limited feline endometrial mesenchymal stem cell (fEM-MSC) research in veterinary medicine necessitates reporting for future feline disease research and therapy. Objectives: This study aimed to isolate fEM-MSCs from feline endometrial tissues and evaluate their morphology, proliferative ability, differentiation ability, and immunophenotype. Methods: Feline endometrial tissues were obtained from the ovariohysterectomies of healthy cats and isolated using an enzymatic method. The morphology and proliferative ability of the isolated cells were assessed using a doubling time (DT) assay from passages 3 to 6 (P3 - P6). We measured pluripotency gene expressions of cells in P2 using quantitative real-time polymerase chain reaction (qRT-PCR). To investigate MSC characteristics, a trilineage differentiation assay was conducted in P4, and cells in P4 were immunophenotyped using flow cytometry. Results: fEM-MSCs showed a typical spindle-shaped morphology under a microscope, and the DT was maintained from P3 to P6. fEM-MSCs could differentiate into adipocytes, osteoblasts, and chondrocytes, and expressed three pluripotency markers (OCT4, SOX2, and NANOG) by qRT-PCR. Immunophenotypic analysis showed that the fEM-MSCs were CD14 ^-, CD34 ^-, CD45 ^-, CD9⁺, and CD44⁺. Conclusions: In this study, the feline endometrium was a novel source of MSCs, and to the best of our knowledge, this is the first report on the isolation method and characteristics of fEM-MSCs.

• 한국산업보건학회지
• /
• 제28권1호
• /
• pp.35-42
• /
• 2018

Objectives:본 연구의 목적은 석면함유물질의 사용 특성을 조사하고, "환경부고시 제2016-230호 석면건축물의 위해성 평가 방법"을 적용하여 위해성평가를 실시하였다. Methods:서울 및 경인지역에 위치한 건축물 100개소를 선정하였으며, 지역의 구분은 서울 29개, 인천 20개, 경기 51개이다. 건축연도는 1970년대 3개, 1980년대 11개, 1990년대 42개, 2000년대 44개로 구분하여 조사하였다. 고형시료의 분석은 고효율 필터가 부착된 후드 내에서 입체현미경을 이용하여 전처리 과정을 거쳐 편광현미경으로 분석하였으며, 분석결과가 함유율 1% 초과인 경우에 석면함유물질(Asbestos-Containing Materials, ACMs)을 석면으로 규정하였다. 석면건축자재의 위해성 평가 방법 및 기준은 "환경부고시 제2016-230호 석면건축물의 위해성 평가 방법"을 참고하여 석면함유물질에 노출된 위해성 등급은 세 가지 단계(높음, 중간, 낮음)로 평가하였다. Results: 건축물 100개소 중 30개소, 고형시료 416개 중 36개(8.6%)에서 석면함유물질이 있는 것으로 나타났다. 1990년대에 지어진 건축물 42개 중 18개에서 석면이 높은 비율로 검출되었으며, 2000년대에 지어진 건물 44개 중 7개에서 가장 낮은 비율로 검출되었다. "환경부고시 제2016-230호 석면건축물의 위해성 평가 방법"에 따라 평가를 실시한 결과, 2개 건축자재의 위해성평가 등급은 "중간"으로 나타났으며, 28개의 건축자재는 "낮음" 으로 나타났다. Conclusion: 석면은 정부에 의해 규제되고 있어 적극적으로 관리를 하여야 하고, 다양한 상황에서 얻은 데이터가 뒷받침하는 석면 노출 위해성 평가방법을 도입하여 시행이 필요할 것이다. 개인이 소유하고 있는 건물의 경우 건축주가 석면 노출의 위해성을 인지하고 있어야 할 것이다.

• 대한치과보철학회지
• /
• 제48권4호
• /
• pp.301-307
• /
• 2010

연구 목적: 이번 연구의 목적은 법랑질 두께를 측정하는데 있어 microCT의 정확성을 평가하고, 한국인의 상악전치 법랑질 두께를 알아봄으로써 임상에 도움을 주고자 한다. 연구 재료 및 방법: 발거된 상악 중절치 5개를 레진 포매하여 치아 장축을 따라 정중부에서 협설로 절단하고 연마한 후에 microCT를 촬영하여 scanning electron microscope 상(${\times}20$)에서와 microCT 상에서 거의 동일한 절단면을 구현하였고, 각각 백악법랑경계 상방 1, 3, 5 mm 부위의 협측 법랑질 두께를 측정하여 microCT의 정확성을 평가하였다. 또한 상악 중절치 26개와 측절치 11개를 이용하여 각 치아의 순측 정중부와 정중부에서 근원심으로 각각 2 mm 떨어진 선상에서 백악법랑경계의 상방 1, 3, 5 mm 지점의 법랑질 두께를 측정하였다. 정중부의 세 지점에서는 정중부를 지나는 시상면에서 법랑질 표면에 접선을 그어 이 접선에 수직으로 법랑상아경계까지 수선을 내려 법랑질 두께를 측정하였고, 근원심 2 mm를 지나는 선상에 있는 6개 지점에서는 각 지점을 지나는 수평면에서 법랑질 표면에 접선을 그어 이 접선에 수직으로 법랑상아경계까지 수선을 내려 법랑질 두께를 측정하였다. 결과: 동일한 절단면에서 주사전자현미경과 microCT를 이용하여 백악법랑경계 상방 1, 3, 5 mm 지점의 순면 법랑질 두께를 측정한 값은 평균 3.81% 차이가 났으나, independent t-test 결과 두 가지 방법에 의한 측정값은 통계적으로 유의한 차이가 없었다. 상악 중절치의 정중부에서 백악법랑경계 1, 3, 5 mm 상방의 순면 법랑질 두께는 각각 $0.32{\pm}0.01$, $0.50{\pm}0.02$, $0.70{\pm}0.02\;mm$로 나타났다. 상악 측절치의 정중부에서 백악법랑경계 1, 3, 5 mm 상방의 순면 법랑질 두께는 각각 $0.30{\pm}0.01$, $0.55{\pm}0.03$, $0.80{\pm}0.02\;mm$로 나타났다. 결론: 법랑질 두께를 측정하는데 있어 microCT는 유용한 측정방법의 하나이며, 이번 연구의 결과로 볼 때 한국인의 상악전치부 도재 라미네이트 수복시 법랑질의 삭제량에 주의를 기울일 필요가 있는 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제35권6호
• /
• pp.453-460
• /
• 2010

연구목적: 치주질환이나 보철치료 계획으로 발치 예정인 성인 환자들을 대상으로 2 종의 전자근관장측정기를 사용하여 얻은 측정치의 정확성 (accuracy)을 평가하고, 현미경을 사용하여 각각 0.5 mark와 Apex mark 중에서 어느 지점에서 더 일관성 (consistency)을 보이는지를 비교하는 것이다. 연구 재료 및 방법: 치주 및 보철치료계획으로 인해 발거 예정인 26개의 건전한 치아들에서 13개는 Root ZX를 이용하여 측 정하였고, 나머지 13개는 i-ROOT를 이용하여 측정하였다. 국소마취를 시행 후 러버댐을 적용한 후 치아의 치수강을 개방하였다. 이때 교합면을 치아 장축에 수직으로 삭제함으로써 근관장을 측정할 때 발생할 수 있는 오차를 최소화하였다. 모든 근관에서 0.5 mark에서 먼저 근관장을 측정한 후 file을 더 전진하여 Apex mark에서 근관장을 다시 측정하였고, 이 지점에서 file을 Light cured glass ionomer로 고정하였다. 이후 치아들을 발거한 후 생리식염수에 보관하였다. 각각 치아들의 치근단부 5 mm를 21.3배율의 현미경 하에서 치근의 장축 방향으로 고속핸드피스 다이아몬드 바를 사용하여 조금씩 삭제하여 치질을 조심스럽게 제거하여 file tip을 완전히 노출시켰다. 현미경 하에서 진행한 과정들은 현미경과 연결된 DVD recorder를 통해 저장하였다. 이 이미지를 영상분석 프로그램인 i-solution에 적용하여 file tip에서부터 주근단공까지의 최단거리를 측정하였다. 결과: 1. Apex mark 이용 시 Root ZX와 i-ROOT 모두에서 주근단공 ${\pm}0.5\;mm$ 이내의 부위를 100% 찾아내는 정확도를 보였다. 2. 0.5 mark 이용 시 Root ZX에서는 100%, i-ROOT에서는 77%에서 주근단공 ${\pm}0.5\;mm$ 이내의 부위를 찾아내는 정확도를 보였다. 3. 표준편차와 사분위 값으로 평가하였을 때 Root ZX에서는 Apex mark가 0.5 mark보다 일관성을 나타냈으며 i-ROOT에서는 0.5 mark가 Apex mark보다 일관성을 보였으나 t-test 결과에서는 통계적 유의차가 없었다. 4. Apex mark와 0.5 mark 차이는 Root ZX에서는 0.22 mm, i-ROOT에서는 0.46 mm를 보였다. 결론: Apex mark와 0.5 mark 모두 일관성에 있어서의 차이는 없으나 Apex mark의 측정치가 0.5 mark에 비하면 주근단공에 거의 일치하는 점을 고려해, 임상에서 근관장을 결정할 시 Apex mark 측정치를 먼저 구한 후 기존연구들에서 보고된 주근단공에서부터 근관협착부까지의 평균거리인 0.5 mm를 빼는 것이 좋을 것으로 사료된다.