• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.2
• /
• pp.625-631
• /
• 2012

In order to investigate whether SKI-II could reverse drug resistance and its possible mechanisms, we treated SGC7901/DDP cells with SKI-II or SKI-II in combination with DDP. Then cell growth, apoptosis, micromorphological changes, and expression of SphK1, P-gp, NF-${\kappa}B$, Bcl-2 and Bax were assessed by MTT assay, flow cytometry, electron microscopy, immunocytochemistry and Western blot assay respectively. SGC7901/DDP cells were insensitive to cisplatin 2.5mg/L, but when pretreated with SKI-II, their proliferation was inhibited by cisplatin 2.5mg/L significantly, the inhibition rate increasing with time and dose. The apoptosis rate was also significantly elevated. Expression of SphK1 and P-gp was decreased significantly, Pearson correlation analysis showing significant correlation between the two (r=0.595, P<0.01). Expression of NF-${\kappa}B$ and Bcl-2 was decreased significantly,while that of Bax was increased, compared to the control group. There were significant correlations between SphK1 and NF-${\kappa}B$(r=0.723, P<0.01), NF-${\kappa}B$ and Bcl-2(r=0.768, P<0.01). All these data indicated that SKI-II could reverse drug resistance of SGC7901/DDP to cisplatin by down-regulating expression of P-gp and up-regulating apoptosis through down-regulation of SphK1. The increased apoptotic sensitivity of SGC7901/DDP to cisplatin was due to the decreasing proportion of Bcl-2/Bax via down-regulating NF-${\kappa}B$.

• Korean Journal of Plant Resources
• /
• v.29 no.4
• /
• pp.376-384
• /
• 2016

A comparative petal micromorphology of 15 taxa of tribe Sorbarieae was carried out using scanning electron microscopy (SEM) in order to evaluate their taxonomic and systematic implication. The characteristics of both adaxial and abaxial side of petal epidermal cells such as shape, arrangement, anticlinal wall and cuticular sculpture were described in detail. The Sorbarieae petal epidermal cells were identified as papillate or conical papillate (PCS) and rectangular-rugose tabular (TRS). Three types of petal micromorphology were found within the tribe based on the cell patterns of adaxial and abaxial side. Type I. PCS-TRS, Type II. PCS-PCS, Type III. TRS-TRS (adaxial-abaxial side). The petal epidermal cell types, anticlinal cell wall, and cuticular sculpture represent not only taxonomical importance for identification between or within the genera but also systematic implication. Moreover, this study provides a relation between petal epidermal cell pattern and insect pollinator (entomophily; melittophily) as an additional case.

• Korean Journal of Acupuncture
• /
• v.21 no.4
• /
• pp.43-51
• /
• 2004

Objectives : In order to ensure safe acupuncture treatment, the quality of the needle tip is essential. But, there have not been so many studies about the quality of the acupuncture needle tip. For this reason we have been already reported about the quality of acupuncture needle tip in Korea using scanning electron microscope(SEM) in 2002, 2003. In order to compare than other society, we investigated the current condition of the tips of the acupuncture needles sold in Europe. Methods : We obtained the needles made by 7 companies, which are sold currently in Europe, and selected 50 pieces out of 100 pieces from each company by randomized methods. And then we observed the tip of each needle using a scanning electron microscope at ${\times}800$ magnification. Results and Discussion : We found that needles had several defects such as scratch marks on the surface, metallic scuff, lumps and irregularities of the needle tips, stubbed or malformed tips, tips of point off-center, peeled off coated tips, same as Korean needles. There was much difference on the quality of needles among the manufacturers, and some needles seem to need thorough quality control. Allowing for the high price, the quality of some needle in Europe generally are better than that of Korean needles. But some Korean needles hold a top position than European ones in quality. We want a good industrial standard to be made in acupuncture manufacturing fields in the near future, because the safety is not less valuable than the efficacy in medicine.

• Journal of Acupuncture Research
• /
• v.22 no.6
• /
• pp.135-140
• /
• 2005

Objectives : There have been several studies about the quality of acupuncture needle tip recently. We have investigated the condition of the tip of the acupuncture needles in the last studies. In the former studies, we discovered the metallic scuff, lumps and irregularities of the acupuncture needle tips under the microscope. But, no information was available on those foreign materials' identity. Methods : We have selected 200 needles of 1000 pieces from several companies by randomized methods. And we observed the tip of the 6 needles selected finally at ${\times}1000\;or\;{\times}3000$ magnification and analyzed the components of the metallic scuff, lumps and irregularities of the needle tips with a SEM-EDX analyser. Results : We found that the identity of the metallic scuff, lumps and irregularities of the needle tips were metallic materials and silicon. For example, A point was composed of Fe(69.78%), Cr(17.71%), Ni(8.11%), Zn(2.04%), Si(1.23%), Mn(1.12%), and B point was composed of Si(66.40%), Fe(26.76%), Cr(6.84%). Conclusion : The results of this study confirm that there is a real possibility of the remaining of metallic materials and silicon in body of patient, after acupuncture treatment. Therefore, it is necessary to intensify our efforts to make needles of good quality and to concentrate on manufacturing process of acupuncture needles completely to be free from danger in acupuncture treatment.

• The Korean Journal of Quaternary Research
• /
• v.3 no.1
• /
• pp.35-45
• /
• 1989

In Korean peninsula as well as in Western European Countries, we can find, reddish bands in sandy deposits of various origin. These bands (called "$B_t$ Band"), composed of fine material, are regularly intervalled and parallel to topography. This study is tring to elucidate their origin and associated milieux, with a group of methods and techniques (field survey, micromorphological analysis, granulometry, X-ray diffractometry of clay minerals...). $B_t$ Bands are not sedimentological origin. They were formed by superposition of two type accumulations in the sandy profile, triggered by different mechanisms: 1) accumulation in banded form, concerning silty heterometric material and micas, oweing to cryophoretic forces operating in course of deep freezing of sandy deposits: 2) illuviation of ferrugineous clays in the precedants bands, migrated in chelate state by soil water. The first processes are associated with very cold and humid climate in which freeze soil more than 3m in depth. The second, cold and humid climate in which podzolizattion is generalized. In case of South Korea and Western Europe, these two types of climates are not present circumstance, but Recent Quaternary (probably since the Wurm).the Wurm).

• Journal of Microbiology and Biotechnology
• /
• v.18 no.1
• /
• pp.128-134
• /
• 2008

The kinetics of cell growth and Cyclosporin A (Cyc A) production by Tolypocladium inflatum were studied in shake flasks and bioreactors under controlled and uncontrolled pH conditions. In the case of the shake flask, the production time was extended to 226 h and the maximal antibiotic concentration was 76 mg/l. When scaling up the cultivation process to a bioreactor level, the production time was reduced to only 70h with a significant increase in both the cell growth and the antibiotic production. The maximal dry cell weights in the case of the controlled pH and uncontrolled pH cultures in the bioreactor were 22.4g/l and 14.2g/l, respectively. The corresponding maximal dry cell weight values did not exceed 7.25g/l with the shake flask cultures. The maximal values for Cyc A production were 144.72 and 131.4 mg/l for the controlled and uncontrolled pH cultures, respectively. It is also worth noting that a significant reduction was observed in both the dry cell mass and the antibiotic concentration after the Cyc A production phase, whereas the highest rate of antibiotic degradation was observed in the stirred tank bioreactor with an uncontrolled pH. Morphological characterization of the micromorphological cell growth (mycelial/pellet forms) was also performed during cultivation in the bioreactor.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.3
• /
• pp.189-193
• /
• 2015

Bad drainage problems from paddy fields adjacent to roads are caused by higher constructed roads which change topography of paddy fields to concave topography and artificial pan to prevent road erosion when road constructions are occurred. This study investigated effects of topography changes on soils by road constructions. Soil samples were investigated by physico-chemical analyses and micromorphology analyses from representative soil profile of Sachon series and soil samples. The characteristics of Sachon series that were adjacent to roads were fewer redoximorphic features (RMF) and increase in grey layers than the original Sachon series. The characteristics of Yecheon Series were shown from Jeollanamdo - Suncheon > Chungchungnamdo - Cheonan > Gangwondo - Wonju. Mosaic speckles were shown from micromorphological analyses because of repeat of shrink and expansion by wetting and drying. The location of graying in soil clods were found from coarse stone blocks to fine stone blocks and color changes of composed particles were also found.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.61-70
• /
• 1996

침엽수재(針葉樹材)(Radiata pine, Pinus radiata)MDF와 활엽수재(闊葉樹材)(Rubber wood, Hevea brasiliensis)MDF 각 1종을 대상으로 MDF를 제조하기 전 원료(原料) 섬유(纖維)의 미세(微細) 구조(構造) 및 내부결합력 시험 후 MDF의 파괴면(破壞面)에서 섬유표면(纖維表面)에 접착제(接着劑)가 도포(塗布)된 형태를 주사전자현미경(走査電子顯微鏡)으로 관찰하였다. 원료 섬유는 침(針) 활엽수재(闊葉樹材) 모두 fiber twisting 및 shrinkage fold 등이 관찰되었다. 침엽수재(針葉樹材)의 경우는 유연벽공부(有緣壁孔部)에서 유연벽공(有緣壁孔)이 없는 부분에 비하여 shrinkage fold의 발생 빈도가 낮고 표면(表面) 박리(剝離)는 가도관(假導管) 중 벽공이 없는 부분에서 관찰되었다. 활엽수재(闊葉樹材) 목섬유(木纖維)는 침엽수재(針葉樹材)와 마찬가지로 shrinkage fold가 관찰되었으나 표면(表面) 박리(剝離)는 거의 관찰되지 않았다. 활엽수(闊葉樹) 섬유(纖維)에서는 벽공의 유무에 따른 shrinkage fold의 차이(差異)가 거의 관찰되지 않았는데 이는 목섬유(木纖維)가 침엽수(針葉樹) 가도관(假導管)보다 작은 단벽공(單壁孔)을 갖기 때문으로 생각된다. 또 방사유세포(放射柔細胞)와 가도관(假導管) 및 목섬유(木纖維)의 박리(剝離) 부분(部分)에는 융기부(隆起部)가 관찰되었다. 내부결합력 시험후 나타난 파괴면을 통하여 접착제 분포를 관찰한 결과 거의 모든 섬유(纖維)들이 접착제(接着劑)로 둘러싸여 있었으며 섬유(纖維)간 접착형태(接着形態)도 매우 다양하였다. 침활엽수재(針闊葉樹材)간에 강도(强度)의 차이는 있었지만 파괴(破壞) 형태(形態)는 큰 차이를 나타내지 않았다. 즉 침활엽수(針闊葉樹) 모두 접착층(接着層)이 아닌 섬유(纖維)에서 파괴(破壞)가 발생하였으며 섬유에서 박리(剝離)된, 세포벽(細胞壁)의 일부가 다른 섬유(纖維)의 표면(表面)에 남아있는 형태와 섬유(纖維) 표면(表面)에서 떨어져 나간 형태로 관찰되었다. 세포 구성이 단순한 침엽수(針葉樹) MDF에 비하여 유세포(柔細胞)와 도관(導管) 및 목섬유(木纖維)의 파편들이 활엽수(闊葉樹) MDF에서는 다양(多樣)하게 분포하였다.

• Microbiology and Biotechnology Letters
• /
• v.16 no.2
• /
• pp.156-162
• /
• 1988

Optimal conditions for the formation and regeneration of protoplasts of the cellulolytic fungus Penicillium verruculosum were investigated. Among the various commercial cell wall lytic enzymes tested, 0.5%(w/ v) Novozym 234 was the most effective for protoplast formation. The highest yield of protoplast exceeding 4.5$\times$10$^6$/m$\ell$ obtained when 400mg of 20 hr-old mycelia was incubated with 0.5%(w/v) Novozym 234 at 3$0^{\circ}C$ for 1 hr. The best osmotic stabilizer for the isolation and re-generation of protoplasts was 0.7M sorbital (pH 5.6) and 0.6M MgSO$_4$(pH 5.6), respectively. When 0.6M MgSO$_4$was added as osmotic stabilizer to the complete medium, the maximum regeneration frequency obtained was 4.6-27.8%. Micromorphological change of giant protoplasts into hyphae was observed during incubation in the regeneration liquid medium.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.4
• /
• pp.242-248
• /
• 2014

We have five soil series of pan soils in South Korea out of 391 series: Gangreung, Bugog, Yeongog, Jangweon, and Pogog. Productivity decreases in pan soils as pan horizons impede percolation and capillary rise of water and interrupt root extension. This study was performed to investigate pedogenic processes of pan soils mainly located in footslope and river terrace by analyzing physicochemical properties and soil micro-morphology. Korean pan soils belong to Alfisols, Ultisols, or Inceptisols and have udic or aquic soil moisture regime, mesic temperature regime, and mixed mineral substances. Texture of pan horizons selected for the present study was mainly silty clay loam with clay contents ranging from 26.3 to 45.3%. Bulk density of the pan horizons ranged from 1.4 to $2.1Mg\;m^{-3}$ and their soil structure were subangular or angular structure. In terms of micro-morphological structure, Bt horizon of Gangreung series was formed as platy and striated b-fabric structure possibly affected by uplift of coastal terrace following clay sedimentation by flood. Jangweon series showed micro-morphology of massive structure and crystallic b-fabric as macropores between coarse debris established by debris fall in slope were filled with silt-sized particles. The Bt horizons having massive structure and striated b-fabric in Yeongog, Pogog, and Bugog series implies that those horizons experienced horizontal mass flow after clay accumulation.