• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2474-2479
• /
• 2009

This paper presents an atmospheric microplasma-jet device for bio~medical application. The microplasma-jet device consists of four components; a thin Ni anode, porous alumina insulator, a stainless steel cathode and an aluminum case. The anode has 8 holes, and hole diameter and depth are $200 {\mu}m$ and $60 {\mu}m$, respectively. The discharge test was performed in atmospheric pressure using nitrogen gas and AC voltage at the optimum gas flow rate of 4 Vmin. The plasma-jet is ejected stably for the input voltage ranging from 5.5 to $9.5 kV_{p-p}$. The plasma becomes dense as the input voltage increases, which was verified by the hydrophilicity change of PMMA surface treated by the plasma. The temperature increasement of the aluminum film exposed to plasma-jet illustrates that the micro plasma-jet device is feasible for bio-medical application.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.1
• /
• pp.55-62
• /
• 2004

This paper addresses the method for figuring out the hole diameter on the mask containing the information about machining depth. With this mask e micro machining is carried out with a simple 2D movement of the mask. Based on e suggested method excimer laser ablation processes are modeled and determination of the optimal laser ablation conditions such as hole diameter, step size, mask movement velocity, etc. is completed. The excimer laser ablation simulation for creating 3D micro lens is carried out by employing determined ablation conditions to prove verification of the method. The results from simulation illustrated the average error of 140nm and e relative error of 2％.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.2023-2025
• /
• 2002

We have fabricated a novel vertical trench-Hall device sensitive to the magnetic field parallel to the sensor chip surface. The vertical trench-Hall device is built on SOI wafer which is produced by silicon direct bonding technology using bulk micromachining, where buried $SiO_2$ layer and surround trench define active device volume. Sensitivity up to 350 V/AT is measured.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1979-1981
• /
• 2002

새로운 방식의 일체형 flexible sensor module을 제작하였다. MEMS공정을 이용하여 제작된이 센서 모듈은 배선기판은 물론 strain sensor 역시 임의의 곡면에 실장을 위해 자유로운 굽힘이 가능하도록 제작되었다. 실리콘웨이퍼에 구현된 piezoresistor 스트레인 센서는 release-etch 방법을 통해 웨이퍼로부터 분리되어, 폴리이미드를 기판으로 하는 Flexible Sensor Array Module로 완성되었다. 소자와 기판을 따로 제작한 후 조립하는 기존의 방식에 비해, 웨이퍼 위에서 flexible 기판을 형성하여 수율이 높고 사진공정의 정밀도를 그대로 보전한 기판과 센서 어레이의 패키징이 가능하였으며, 칩을 기판에 실장하기 위한 정밀한 조립공정도 불필요하였다. 폴리이미드 기판은 전기도금을 통해 회로를 구성하여 1단계 패키징 (die to chip carrier)과 2단계 패키징 (chip to substrate)을 웨이퍼 레벨에서 완성하였다. 마지막으로 불산 용액을 통해 희생층을 제거함으로서 웨이퍼로 부터 센서어레이 모듈을 분리 하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.45-51
• /
• 2000

지난 세기부터 MEMS 제작 기술을 이용하여 만들어진 시스템들을 의학이나 생물학적인 용도로 응용하기 위한 많은 연구가 활발히 이루어져 왔다. 기술적인 측면에서 이러한 연구들은 MEMS 분야의 초창기에 강조되어 온 표면 및 몸체 미세 가공 기술(surface ＆ bulk micromachining)과 같은 미세 구조물 제작 기술의 발전에 힘입은 바 크다. 그러나 MEMS 기술이 점차 발전되어 오면서, 가공 기술이 고도화되고 미세 시스템의 구조가 점차 복잡해짐에 따라, 많은 연구들이 단순한 가공기술을 넘어 미세 시스템을 조립하고 집적화할 수 있는 기술, 접합 (bonding) 기술, 패키징 (packaging) 기술, 3차원 형상의 제작 기술, 실리콘(silicon)이나 유리(glass)가 아닌 다른 재료를 이용한 미세 가공 기술 등의 개발을 중심으로 이루어지고 있다.(중략)

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.99-104
• /
• 1997

A novel driving theory on the electrohydrodynamic (EHD) pump driven by traveling electric fields without the temperature gradient is proposed. The equations of the generating pressure and the flow rate are derived. The EHD micropump is fabricated by micromachining technology and tested. The channel heights are 50$\mu\textrm{m}$, 100$\mu\textrm{m}$ and 200$\mu\textrm{m}$ are respectively an the channel width is 3 mm. The spacing and width of the electrodes are both 40$\mu\textrm{m}$. The maximum pressure is 70.3 Pa, 35.4 Pa and 17.2 pa at he frequency of 0.2Hz for each channel height (50$\mu\textrm{m}$, 100$\mu\textrm{m}$ and 200$\mu\textrm{m}$) and the maximum flow rate is 0.90x10\ulcorner ${\mu}$$\ell$/min, 1.88x10\ulcorner ${\mu}$$\ell$/min and 4.85x10\ulcorner ${\mu}$$\ell$/min at the frequency of 0.4H for each channel height.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1422-1424
• /
• 1994

This paper deals with piezoresistive humidity sensor using polycrystalline silicon (Poly-Si ) with membrane in sensors of semiconductor. Poly-Si piezoresistors which have no temperature dependancy are deposited on silicon wafer, membrane is formed with micromachining technology, then polyimide is formed as a hygroscopic layer. Whereas the principle of conventional humidify sensors are based on the change in electrical properties of the material, the humidity induced volume change of a polyimide layer leads to a deformation of a silicon membrane in this case. This deformation is transformed into an output voltage by Poly-Si piezoresistive. Wheatstone bridge. Fabricated piezoresistive humidity sensors showed good linearity, response time, and long term stability.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.367-374
• /
• 2016

This paper presents an electro-thermal modeling of an amorphous silicon (a-Si) uncooled microbolometer. This modeling provides a comprehensive solution for simulating the electro-thermal characteristics of the fabricated microbolometer and enables electro-thermal co-simulation between MEMS and CMOS integrated circuits. To validate this model, three types of uncooled microbolometers were fabricated using a post-CMOS surface micromachining process. The simulation results show a maximum discrepancy of 2.6% relative to the experimental results.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2556-2558
• /
• 1998

2-D microwell arrays for micro ELISA (Enzyme-Linked Immuno Solvent Assay) system were fabricated using micromachining technology. The materials for the bottom plate, top plate and sidewall of the microwell were used a #7740 glass, gold and silicon respectively considering bio-compatibility and easy fabrication. Cylindrical or groove shape microwells, which have about $100{\mu}m$ depth and $50{\sim}500{\mu}m$ diameter or width, were arrayed. The fabricated microwell array can be applied to the essential part of a biochip when surface modification is made to immobilize cells or biomolecules on the microwell bottom.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.74-78
• /
• 2002

MEMS공정을 이용하여 폴리실리콘의 piezoresistivity를 이용한 스트레인 센서어레이를 제작하였고, 이 센서 어레이를 flexible substrate에 패키징하는 공정을 개발하였다. 실리콘 웨이퍼에 표면 가공(surface micromachining)된 센서는 폴리이미드 코팅, release-etch 방법을 통해 웨이퍼로부터 분리되어 폴리이미드를 기판으로 하는 flexible sensor array module을 완성할 수 있었다. 공정은 희생층과 절연층을 증착하고 폴리실리콘 0.5 $\mu\textrm{m}$을 증착, 도핑 및 패터닝하여 센서 어레이를 구성하였다. 이 센서어레이를 flexible substrate에 패키징 하기 위해서 폴리이미드를 코팅하여 15 $\mu\textrm{m}$의 막을 구성하였고, 100% $O_2$RIE를 이용한 선택적 식각 방법으로 via hole을 구성하였다. 이후 전기도금을 통해 회로를 구성하여 1단계 패키징(die to chip carrier)과 2단계 패키징(chip to substrate)을 웨이퍼 레벨에서 완성하였다. 희생층을 제거함으로서 웨이퍼로부터 센서어레이 모듈을 분리하였다. 제작되어진 센서 모듈은 임의의 곡면에 실장이 가능하도록 충분한 flexibility를 얻을 수 있었다.