• 대한전자공학회논문지SD
• /
• 제40권12호
• /
• pp.17-23
• /
• 2003

서로 다른 동작온도를 가지는 12개의 감지막으로 구성된 고집적형 센서어레이(다이아프램의 크기가 3×5㎟가 설계되고 열동작의 관점에서 최적화되었다. 이 센서어레이는 에칭된 실리콘기판과 접합된 얇은 유리기판 위의 중앙에 하나의 히터가 위치하고 양쪽에 동작온도가 다른 감지박막이 위치하도록 설계됨으로써 개별 마이크로센서 보다 동시에 훨씬 많은 정보를 얻을 수 있는 장점을 가지고 있다. 제안된 마이크로센서 어레이는 다이아프램의 중앙에 하나의 히터만을 가지는 구조를 하고 있기 때문에 고집적 어레이구조를 실현하면서도, 히터를 중심으로 감지박막의 동작온도에 따라 다양한 감지특정을 얻을 수 있다. 또 히터 양쪽의 감지박막의 종류를 다르게 함으로써 다이아프램위의 전 감지막이 모두 다른 감지특성을 가지게 되어 고집적 센서어레이를 구현하기 용이한 구조로 밝혀졌다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.209.2-209.2
• /
• 2014

In recent years, researches about hydrophobic and hydrophilic surfaces have been executed however their other effects have not been researched enough. In this paper, the fabrication method of hierarchical structures of micro line array combined with fluorinated wax for anisotropic superomniphobic wettability is presented. We have achieved anisotropic and superomniphobic surface via simple two step methods, which are maskless photolithography and wax deposition. In order to prove how to provide those characteristics, SEM, contact angle measurement tool and X-ray diffraction are used. Fluorinated wax is crystalized self-assembly and it is subordinated on micro line array so that it is able to display anisotropic wettability. Understanding on anisotropic superomniphobic surface and simple fabrication method has been attracted to apply for lots of applications which range from self-cleaning surface, microfluidic chip, to directionally fluid control device, even in oily fluid.

• Transactions on Electrical and Electronic Materials
• /
• 제6권2호
• /
• pp.39-45
• /
• 2005

Numerical and visualization procedures are used in a finite difference grid to analyze and better understand the heat transfer in the MEMS based air micro-jet array (MIA) impingement cooling device. The Navier-Stokes (NS) equations with incompressible flow are solved using an implicit procedure. The temperature contour and velocity vector visualization diagrams are used for illustration. The computed temperature distribution at the bottom of the MIA is in good agreement with the experimental measurement data. The parameters are investigated to improve the efficiency of heat transfer in the MIA. The optimum configuration of the MIA is suggested. The present modeling explains the flow phenomenon and yields valuable information to understand the flow and heat transfer in MIA.

• 소성∙가공
• /
• 제21권2호
• /
• pp.126-130
• /
• 2012

Accurate optical texturing of light guide plate over the entire surface area is an important technical issue in LCD TV industry. Injection molding process has the potential to produce large light guide plates having highly efficient optical textures such as micro-prism array. This study is focused on the effect of the degree of replication of the micro texture of the 40" injection molded light guide plates on the overall optical performance of the display panel. Measured replication ratios of the micro-textures formed with three different types of injection molding process were considered in the modeling of prismatic micro segment array. Optical simulation was conducted and results were discussed.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권6호
• /
• pp.271-275
• /
• 2001

We investigated preparation of 1-3 PZT composites for medical ultrasonic transducer array (briefly UTA) using micro pressing method. The proposed process was using pressing PZT green sheet by PMMA micro mold obtained from X-ray lithography. Microstructures, electriacl and electro-mechanical properties of fabricated composites were analyzed. Dielectric constant at 1kHz and thickness mode electro-mechanical coupling coefficient of $6.2mm{\times}6.2mm{\times}422{\mu}m$ UTA sample were 1754 and 51%, respectively. Microstructures of sintered PZT showed dense and uniform. And PZT phases were well crystallized. Micro pressing method is a mass productive process in case of using injection molded PMMA by batch type LIGA process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1885-1888
• /
• 2003

As high technology industries such as IT and display have developed, demand for application parts of micro lens and lens array has been extremely increasing. According to these trends, many researchers are studying on the fabrication technology for parts of the micro lens by a variety of methods such as MEMS, Lithography, LIGA and so on. In this paper, we have performed researches related to ultra precision micro lens, lens array mold and fabrication of Lenticular lens mold for three-dimensional display by using mechanical micro end-milling and fly-cutting fabrication method. Tools used in this research were a diamond tool of R 150$\mu\textrm{m}$. Cutting conditions set up feed rate, spindle revolution. depth of cut and dwell time as variables. And we analyzed surface quality variation of the processed products according to the cutting conditions, and then carried out experiments to search the optimum conditions. Through this research, we have confirmed that we can fabricate the ultra precision micro lens mold with surface roughness Ra=20nm and the holographic lens mold by using micro end-milling and fly-cutting fabrication method. Furthermore, we demonstrated problems happened in the fabrication of the micro lens and established the foundation of experimental study for formulating its improvement plan.

• 에너지공학
• /
• 제16권3호
• /
• pp.113-119
• /
• 2007

데칸에 물을 혼합하여 일정한 크기와 간격으로 유화액적배열을 형성하여 물과의 혼합비율, 액적의 수 그리고 액적 간격 등이 연소특성에 어떠한 영향을 주는가를 고온의 연소실에서 파악하였다. 각각 10%, 20%, 30%의 물을 혼합하여 유화액적을 만든 후 일정한 크기의 액적을 각각의 서스펜더에 매달아서 일정한 간격의 액적배열을 만들어 고온에서 자발화를 시켰을 때, 점화지연, 수명시간, 전연소기간 그리고 미소폭발 등의 연소특성을 비교하였다. 대기압에서 연소실의 온도를 920 K로 하고 서스펜더의 수를 3개와 5개로 하였으며 액적배열의 간격은 $3{\sim}7\;mm$ 범위에서 1 mm 간격으로 각각 실험을 수행하였다. 본 실험을 통하여 물의 혼합비율이 높을수록, 그리고 액적배열의 간격이 넓을수록 점화지연현상이 길게 나타났으며, 수명시간은 액적의 간격이 넓을수록 짧게 나타났으며 점화지연시간과 수명시간의 합인 전연소기간은 액적의 수량이 3개인 경우가 점화지연시간이 긴 관계로 5개에 비해 길게 나타남을 확인하였다.

• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.899-904
• /
• 2011

본 연구는 마이크로 머시닝을 적용한 유동채널가공에서 버의 발생과 제거에 관한 연구이다. AISI316 스테인리스강의 마이크로 유동채널가공은 마이크로 밀링과 자기 디버링을 결합하여 실시하였다. 먼저 마이크로 밀링으로 유동채널을 가공하였고, 가공조건에 따라 마이크로 채널주변에 미소 버가생성됨을 확인하였다. 미소 버를 제거하기 위해서 자기 디버링을 행하였다. AISI316 스테인리스강은 비자성체로 자기연마에 큰 영향을 미치는 자속밀도가 매우 낮은 금속이다. 본 연구에서는 공작물의 자속밀도를 향상시키기 위해서 자기 테이블을 개발하여 이를 자기연마 디버링에 적용하였고, 주사전자현미경(SEM)과 표면형상기로 자기 디버링에 의한 버의 제거효과를 측정하였다.

• 한국전기전자재료학회논문지
• /
• 제34권1호
• /
• pp.8-15
• /
• 2021

Micro-LEDs can be applied to various parts of a product. However, it has disadvantages compared to general LEDs in large displays such as low efficiency, intensity, and contrast ratio, among others, owing to their short history of study. The simulations were carried out using ray-tracing software to investigate the change in light intensity and light distribution according to pattern shapes on the sapphire substrate of the flip-chip micro-LED (FC μ-LED) array. Three patterns-concave square patterns, convex square patterns, and Ag coated convex patterns-which existed on the opposite side of FC μ-LEDs (115 ㎛ × 115 ㎛) array, were applied. The intensity of FC μ-LEDs on the center of the receivers depends on the pattern depth with shape. The concave square patterns having FC μ-LEDs arrays show that decreasing intensity as the patterns depth. On the contrary, the convex square patterns having FC μ-LEDs arrays shows that increasing intensity as the patterns depth. In addition, the highest intensity shows that FC μ-LEDs having Ag-coated convex patterns on the opposite side of sapphire lead to a reduction in light crosstalk owing to the Ag film.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1135-1137
• /
• 2008

In this paper, it is proposed that the integral imaging technique is applied to reconstruct 3D (three dimensional) objects with enhanced depth of field, computationally and optically. Lens array using birefringence material is adopted to obtain the reconstruction. The elemental images sets are picked up through common micro lens array and utilized to present 3D reconstruction images using adopted lens array.