• 수산해양기술연구
• /
• 제46권3호
• /
• pp.223-231
• /
• 2010

This paper showed the difference between the selectivity of gill net by least square method with polynomials in Kitahara's and that by maximum likelihood analysis for Japanese sandfish and Korean flounder. Catch experiments for Japanese sandfish using commercial vessels off the eastern coast of Korea were conducted with six different mesh sizes between October and December 2007 and those for Korean flounder with five different mesh sizes between 2008 and 2009. The mesh size of 50% probability of catch corresponding to biological maturity length of fish was not different between that by least square method and that by maximum likelihood analysis for Japanese sandfish, however, a little different for Korean flounder, that is, those mesh sizes of 50% probability of catch for biological maturity length of Korean flounder were 10.6cm and 10.1cm by least square method and maximum likelihood analysis, respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1092-1099
• /
• 2009

Landslide researches are divided to a method of interrelationship for various factors, method of predicting landslide possibility, and method of estimating landslide risk which are occurring landslides in the natural slope. Most of landslides occurred in natural slope are caused by a heavy rainfall in summer season. Weathered soil layer located in upper side of rock mass was occurred. As well as, they are announced to have an influence to geometry, geology, soil characteristics, and precipitation in the natural slope. In order to investigate and interpret the variety of landslides from field investigation to risk analysis, landslide analysis process due to geotechnical and geological opinions are systematically demanded. In this research, the study area is located in Macheon area, Gyeongsangnam-do and performed the landslide investigation. From the results of landslide investigation and analysis, optimized standard model based on natural landslide is proposed to high technical method of landslide investigation and interpretation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.312-315
• /
• 1993

Optimal control theories based on the maximum principles have been evolved and applied to distributed parameter systems(DPSs) represented by partial differential equations (PDEs) and integral equations (IEs). This paper intends to show that an optimal control of a tubular reactor described by a one-dimensional partial differential equation was obtained using the distributed parameter control method for parabolic PDEs. In develping an algorithm which implements the calculation, the method of lines (MOL) was adopted through using a package called the DSS/2. For the tubular reactor system chosen for this paper, the optimal control method based on PDEs with the numerical MOL showed to be more efficient than the one based on IEs.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2004년도 춘계학술발표대회
• /
• pp.258-258
• /
• 2004

Successful cryopreservation of mammalian oocytes would provide a source of materials for in vitro embryo production. This study was conducted to determine vitrification conditions for bovine immature oocytes using micro-drop method and, to examine maturation, fertilization and development of vitrified bovine immature oocytes. (omitted)

• 한국국방경영분석학회지
• /
• 제5권2호
• /
• pp.27-38
• /
• 1979

This method explores a method of aggregating the measures of effectiveness of a weapon system from its characteristics. With this method, the constant sum method and multiple regression are used to develop a functional relationship between system effectiveness and system characteristics. As an example, a study of a tank weapon system was${\cdot}$conducted with data from the U.S. Army Armor School. It was concluded that the aggregation method is feasible, and that for the tank system studied, the reciprocals of system characteristics give a good estimating equation for measuring tank system effectiveness.

• 한국대기환경학회지
• /
• 제33권3호
• /
• pp.241-250
• /
• 2017

Recently, there has been growing interest in the emission characteristics and behavior of anthropogenic mercury compounds from emission sources. It is required to establish a standard for reliable mercury measurement method. Therefore, this study has evaluated the applicability of the new measurement method; Continuous Emission Monitoring (US EPA 30A, CEM). In addition, the reliability evaluation was conducted through Ontario Hydro Method (ASTM D6784, OHM) and Sorbent trap method (US EPA Method 30B). As a monitoring result for three months via CEM from cement kiln, the maximum mercury compounds concentration was about $600{\mu}g/Sm^3$. This is because of the various of raw materials and fuel, and the absence of mercury-control device. The mercury compounds concentrations of OHM, Sorbent trap and CEM were 13.64 $(3.33{\sim}32.41){\mu}g/Sm^3$, $13.94(5.97{\sim}23.44){\mu}g/Sm^3$ and $14.68(6.19{\sim}26.75){\mu}g/Sm^3$, respectively. The relative standard deviations (% RSD) of the three methods were 5.1~40.9%. The result of this study suggest that it is possible to apply the CEM in the cement kiln when, QA/QC such as calibration is verified.

• 대한환경공학회지
• /
• 제34권11호
• /
• pp.743-750
• /
• 2012

$ClO_{2(aq)}$ 분석 방법 중 하나인 UV 흡수법은 여러 염소종이 함유된 용액에서는 흡수 파장 겹침 현상으로 분석에 어려움이 있다. 이러한 문제를 극복하고자 UV 파장 분해법을 이용한 다양한 염소종이 함유된 용액의 $ClO_{2(aq)}$ 농도 정량법을 제안하였다. UV 파장 분해법을 이용한 $ClO_{2(aq)}$ 농도 값은 적정법을 이용한 $ClO_{2(aq)}$ 농도 값과 10%내에서 일치하였다. 따라서 다양한 염소 종들이 포함된 시료에서도 제안된 UV 파장 분해법을 적용한다면 $ClO_{2(aq)}$의 선택적 분석이 가능하다는 것을 알 수 있었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권3호
• /
• pp.277-300
• /
• 2016

The motion of a floating body and the free surface flow are the most important design considerations for ships and offshore platforms. In the present research, a numerical method is developed to simulate the motion of a floating body and the free surface using a fixed rectilinear grid system. The governing equations are the continuity equation and Naviere-Stokes equations. The boundary of a moving body is defined by the interaction points of the body surface and the centerline of a grid. To simulate the free surface the Modified Marker-Density method is implemented. Ships advancing in regular waves, the interaction of waves by a fixed circular cylinder array and the response amplitude operators of an offshore platform are simulated and the results are compared with published research data to check the applicability. The numerical method developed in this research gives results good enough for application to the initial design stage.

• ETRI Journal
• /
• 제30권3호
• /
• pp.394-402
• /
• 2008

Domain analysis is the process of analyzing related software systems in a domain to find their common and variable parts. In the case of device drivers, they are highly suitable for domain analysis because device drivers of the same domain are implemented similarly for each device and each system that they support. Considering this characteristic, this paper introduces a new approach to the domain analysis of device drivers. Our method uses a code clone detection technique to extract similarity among device drivers of the same domain. To examine the applicability of our method, we investigated whole device drivers of a Linux source. Results showed that many reusable similar codes can be discerned by the code clone detection method. We also investigated if our method is applicable to other kernel sources. However, the results show that the code clone detection method is not useful for the domain analysis of all kernel sources. That is, the applicability of the code clone detection method to domain analysis is a peculiar feature of device drivers.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.470-479
• /
• 2016

The model based method for energy saving of the separately excited DC motor drive system is proposed in the paper. The accurate power loss model is necessary for this method. Therefore, the adaptive tabu search algorithm is applied to identify the parameters in the power loss model. The field current values for minimum power losses at any load torques and speeds are calculated by the proposed method. The rule based controller is used to control the field current and speed of the motor. The experimental results confirm that the model based method can successfully provide the energy saving for separately excited DC motor drive. The maximum value of the energy saving is 48.61% compared with the conventional drive method.