• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1737-1741
• /
• 2008

Dielectrophoretic behavior of semiconducting single-walled carbon nanotubes(SWNT) was investigated theoretically and experimentally. The surface conductance of nanotubes was modulated using anionic and cationic surfactant mixtures. The experimental results indicate that dielectrophoretic behavior of SWNT highly depends on the procedure of mixing two opposite-charged surfactants. Clausius-Mossotti factor was calculated by measuring zeta potentials and solution conductivity. Raman spectroscopy was used to characterize the dielectrophoretically deposited nanotubes arrary. We found that metallic nanotubes were selectively separated from the nanotubes suspension, resulting from modulation of surface conductance of semiconducting SWNT.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.235-236
• /
• 2009

금속 아세테이프가 금속으로 열분해하는 반응을 이용하여 템플레이트 안에 잘 정렬된 금속 나노 구조물을 얻는 것은 센서 (sensor), 분리 막(separation), 저장 장치(storage), 에너지 전환 장치 (energy conversion)에 응용이 가능하다. 실버 아세테이트와 팔라듐 아세테이트에서 순수 실버와 팔라듐 나노 구조의 제조 및 형태의 차이를 밝히는 것을 목적으로 나노 입자의 크기와 활성화 에너지가 이에 영향을 주는 것으로 확인할 수 있었다. 금속 나노 구조의 확인 및 나노입자의 크기와 활성화 에너지를 분석 관찰하기 위해 DSC, TG, XRD, FE-SEM 등을 이용하였다.

• Applied Science and Convergence Technology
• /
• v.25 no.6
• /
• pp.149-153
• /
• 2016

Thermal oxidation has significant potential for use in synthesizing metal-oxide nanostructures from metallic materials. However, this method has limited applicability to the synthesis of multi-morphology NiO from Ni foil. Techniques consisting of mechanical and chemical approaches were used to pre-treat the Ni foil (prior to oxidation) to promote the formation of nanowires and nanoplates on the NiO layer. These morphologies were realized on the Ni foils scratched by sand paper and a knife, respectively, and subsequently heat-treated at $500^{\circ}C$ for 24 h. Small nanowires (diameter: <10 nm) formed on the Ni foil treated by absolute $HNO_3$ and then oxidized at $500^{\circ}C$ for 24 h. The formation of various morphologies (on the pre-treated Ni foil), which differ from that formed in the case of pristine Ni foil after oxidation, may be attributed to the surface melting phenomenon that occurs during the nucleation process.

• Current Photovoltaic Research
• /
• v.6 no.3
• /
• pp.74-80
• /
• 2018

Recently, perovskite solar cells have shown tremendous improvement in power conversion efficiencies. Moreover, they have potential in semitransparent solar cell applications due to their high absorption coefficients. In order to fabricate semitransparent perovskite solar cells with good performance, it is essential to consider the suitability of transparent electrode materials in various aspects, such as transparency, conductivity and fabrication process. In this review, candidate materials for transparent electrodes in perovskite solar cells including carbon-based nanomaterials, conductive polymers and metallic nanostructures are discussed.

• Advances in nano research
• /
• v.4 no.1
• /
• pp.45-50
• /
• 2016

Data of Raman spectroscopy from graphene and few-layer graphene (FLG) irradiated by SEM electron beam in the range of energies 0.2 -30 keV are presented. The obvious effect of damaging the nanostructures by all used beam energies for specimens placed on insulator substrates ($SiO_2$) was revealed. At the same time, no signs of structural defects were observed in the cases when FLG have been arranged on metallic substrate. A new physical mechanism of under threshold energy defect production supposing possible formation of intensive electrical charged puddles on insulator substrate surface is suggested.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.1
• /
• pp.14-31
• /
• 2024

The text highlights the growing need for eco-friendly energy storage and the potential of metal-organic frameworks (MOFs) to address this demand. Despite their promise, challenges in MOF-based energy storage include stability, reproducible synthesis, cost-effectiveness, and scalability. Recent progress in supercapacitor materials, particularly over the last decade, has aimed to overcome these challenges. The review focuses on the morphological characteristics and synthesis methods of MOFs used in supercapacitors to achieve improved electrochemical performance. Various types of MOFs, including monometallic, binary, and tri-metallic compositions, as well as derivatives like hybrid nanostructures, sulfides, phosphides, and carbon composites, are explored for their energy storage potential. The review emphasizes the quest for superior electrochemical performance and stability with MOF-based materials. By analyzing recent research, the review underscores the potential of MOF-based supercapacitors to meet the increasing demands for high power and energy density solutions in the field of energy storage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.77-77
• /
• 2008

금(Au)이나 은(Ag)과 같은 귀금속 물질로 형성된 금속 나노 구조체는 표면 플라즈몬 공진(Surface Plasmon Resonance, SPR) 현상과 이의 국부 환경(local environment) 변화에 대해 민감한 의존성으로 인하여 생화학적 센서로의 응용이 주목 받고 있다. 표면 플라즈몬 공진은 광 흡수와 광 산란을 수반하는데, 두 가지 특성 모두 분광학적 신호검출방식으로 센서에 응용가능하다. 이 중 광 산란을 이용하는 방식은 광원의 배경잡음 효과가 배제되기 때문에 단일 입자 검출에 유리하다. 광 흡수와 광 산란 특성은 금속 나노 구조체는 크기, 형상, 주변 매질, 물질의 선택에 따라서 영향을 받는다. 본 연구에서는 금 나노 디스크(nanodisc)의 형상에 따라서 여기 되는 표면 플라즈몬이 광 흡수와 광 산란 특성에 미치는 영향을 가시광과 근적외선 영역에 대해서 불연속 쌍극자 근사법(Discrete Dipole Approximation, DDA)을 이용하여 전사모사(simulation) 하였다. 금 나노 디스크의 형상과 플라즈몬 특성 간의 관계는 공명 파장과 산란 양자 거둠율(scattering quantum yield, $\eta$)을 이용하여 분석하였고, 센서로서의 응용을 가늠하기 위해 주변 매질의 굴절률을 조절하여 그에 따른 민감도(sensitivity )를 비교하였다. 나노 디스크의 모양이 판상에 가까워질수록 공명 파장은 적색 편이하였고 광 산란 효율과 민감도는 증가하는 현상이 나타났다. 또한, 산란 양자 거둠율은 증가하다가 완만하게 감소하는 경향이 나타났다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.385-385
• /
• 2012

Understanding the thermodynamics and structural transformation during the Metal-Insulator Transition (MIT) is critical to better understand the underlying physical origin of phase transition in the vanadiumdioxide ($VO_2$). Here, through the temperature-dependent in-situ high resolutiontransmission electron microscopy (HR-TEM), and systematic electrical transport study, we have shown that the tunable MIT transition of $VO_2$ nanowires is strongly affected by interplay between strain and domain nucleation by ion beam irradiation. Surprsingly, we have also observed that the $VO_2$ rutile (R) metallic phase could form directly in a strain-induced metastable monoclinic (M2) phase. These insights open the door toward more systematic approaches to synthesis for $VO_2$ nanostructures in desired phase and to use for applications including ultrafast optical switching, smart window, metamaterial, resistance RAM and synapse devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.226-231
• /
• 2002

The present study discusses the results of the controlled precipitation of HgTe nanocrystals in a PbTe semiconductor matrix and demonstrates its effectiveness in producing well-organized and crystallographically aligned semiconductor nanocrystals. Following the similar procedure used in metallic alloys, the semiconductor alloys are treated at 600$^{\circ}C$ for 48 hours, quenched and aged up to 500 hours at 300$^{\circ}C$ and 450$^{\circ}C$ to induce homogeneous nucleation and growth of HgTe nanocrystalline precipitates. Examination of the resulting precipitates using transmission electron microscopy (TEM) and high resolution TEM (HRTEM) reveals that the coherent HgTe precipitates form as thin discs along the {100} habit planes making a crystallographic relation of {100}$\sub$HgTe///{100}$\sub$PbTe/ and [100]$\sub$HgTe///[100]$\sub$PbTe/. It is also found that the nato-disc undergoes a gradual thickening and a faceting under isothermal aging up to 500 hours without any noticeable coarsening. These results, combined with the extreme dimension of the precipitates (4 nm in length and sub-nanometer in thickness) and the simplicity of the formation process, leads to the conclusion that controlled precipitation is an effective method for the preparation of the desirable quantum-dot nanostructures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.413-413
• /
• 2014

In this paper, we present a fabrication method of functionalized gold nanostructures on flexible substrate that can be implemented for plasmonic sensing application. For biomolecular sensing, many researchers exploit unconventional lithography method like nanoimprint lithography (NIP), contact transfer lithography, soft lithography, colloidal transfer printing due to its usability and easy to functionalization. In particular, nanoimprint and contact transfer lithography need to have anti-adhesion layer for distinctive metallic properties on the flexible substrates. However, when metallic thin film was deposited on the anti-adhesion layer coated substrates, we discover much aggravation of the mold by repetitive use. Thus it would be impossible to get a high quality of metal nanostructure on the transferred substrate for developing flexible electronics based transfer printing. Here we demonstrate a method for nano-pillar mold and transfer the controllable nanoparticle array on the flexible substrates without an anti-adhesion layer. Also functionalization of gold was investigated by the different length of thiol applied for effectively localized surface plasmonic resonance sensing. First, a focused ion beam (FIB) and ICP-RIE are used to fabricate the nanoscale pillar array. Then gold metal layer is deposited onto the patterned nanostructure. The metallic 130 nm and 250 nm nanodisk pattern are transferred onto flexible polymer substrate by bi-layer functionalized contact imprinting which can be tunable surface energy interfaces. Different thiol reagents such as Thioglycolic acid (98%), 3-Mercaptopropionic acid (99%), 11-Mercaptoundecanoic acid (95%) and 16-Mercaptohexadecanoic acid (90%) are used. Overcoming the repeatedly usage of the anti-adhesion layer mold which has less uniformity and not washable interface, contact printing method using bi-layer gold array are not only expedient access to fabrication but also have distinctive properties including anti-adhesion layer free, functionalized bottom of the gold nano disk, repeatedly replicate the pattern on the flexible substrate. As a result we demonstrate the feasibility of flexible plasmonic sensing interface and anticipate that the method can be extended to variable application including the portable bio sensor via mass production of stable nanostructure array and other nanophotonic application.