• Journal of Welding and Joining
• /
• v.29 no.6
• /
• pp.77-81
• /
• 2011

In most industry, manual GTAW welding is preferred for formation of stable back bead in root weld of butt joint. However, manual GTAW welding has low productivity as compared with GMAW, also it has unstable bead quality which depend on skilled workers. So it is necessary to develop process of root pass welding by using automation GMAW that have stable back bead formation and high productivity. In this paper, the design of U-groove with 3mm root face was applied to extend the tolerance of misalignment in condition of standard root gap 1.5mm. Consequently, for the formation of stable back bead in root pass of butt welding, in case of the narrow root gap(0.5mm) the large arc force was applied by increasing the current and voltage. In case of the large root gap(2.5mm), the small arc force was applied by decreasing the current and voltage. Considering the various root gap, the required deposited metal was controlled by welding speed only.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.568-574
• /
• 2024

The development of radiation-tolerant radio-frequency (RF) systems can be a solution for applications in extreme radiation environments, such as nuclear power plant monitoring and space exploration. Among the crucial components within an RF system, the low noise amplifier (LNA) stands out due to its vulnerability to TID effects, mainly relying on transistors as its main devices. In this study, the TID effects in the LNA using standard 0.18 ㎛ complementary metal oxide semiconductors (CMOS) technology are estimated and analyzed. The results show that the LNA can withstand absorbed radiation up to 100 kGy. The S₂₁, S₁₁, noise figure (NF), stability (K), and linearity of the third input intercept point (IIP3) slightly shifted from the initial values of 0.8312 dB, 0.793 dB, 0.00381 dB, 1.34406, and 2.36066 dBm, respectively which are still comparable to the typical performances. Moreover, the standard 0.18 ㎛ technology has demonstrated its radiation tolerance, as it exhibits negligible performance degradation in the conventional LNA even when exposed to radiation levels up to 100 kGy. In this context, simulation approach offers a means to predict the TID effects and estimate the radiation exposure limit for electronic devices, particularly when transistors are used as the primary RF components.

• Journal of Food Hygiene and Safety
• /
• v.16 no.4
• /
• pp.324-332
• /
• 2001

Foods constitute a large portion of heavy metal exposure toward general population and attract a deep concern with respect to assuring human health. This study summarized published data in Korea on the content, and dietary intake of heavy metals and assessed their risk potential in comparison with foreign data. An analysis for the yearly fluctuation of metal contents including arsenic, cadmium, mercury and lead by flood group (marine fishes, coastal shellfishes, freshwater fishes, cereal grains) exhibited a decreasing trend from the 1970s to the 1990s. When compared with domestic standards of heavy metals, their mean contents were below the limit and their maximum values seldom exceeded the limit. The data on the dietary intake of heavy metals by Koreans showed a decreasing trend from the 1980s to the 1990s. The average intakes offs and Hg were 6∼8% and those of Cd and Pb were 50∼80% of PTWI(provisional tolerable weekly intake), all of which were below the tolerance. As the extreme intakes of these metals may exceed the PTWI, a careful assessment for them may be necessary. Dietary intakes of Cd, Hg and Pb by Koreans lie in the mid-level among countries cited in the GEMS/Food monitoring data. As fishery foods are suspecious of contamination with Hg, Cd and As, and floods in general are with Pb, it is necessary to establish legal limits for these metals and monitor any progress of their contamination. Furthermore, overall assessment of exposure to heavy metals from all sources including floods, air, drinking water and occupation should be made in order to confirm the dietary risk factors and to assure the safety of food resources.

• Microbiology and Biotechnology Letters
• /
• v.32 no.4
• /
• pp.341-346
• /
• 2004

The quantification of the toxicological effects of the heavy metals such as Cu, Cd, Cr, Hg, and Zn on the growth of Escherichia coli was performed, and the variations of toxicwith exposure time were evaluated in adaptation procedure. The characteristics of growth inhibition on Escherichia coli by heavy metals were different with metal species, and critical concentration of each metal, which inhibited cell growth completely, were Cu of 3.5 mM, Zn of 2.5 mM, Cd of 1.5 mM, Cr of 1.2 mM, and Hg of 0.12 mM, respectively. The tolerance of E. coli against heavy metals, based on $EC_{50}$ values, increased in order of Cu > Zn > Cr > Cd > Hg. The slopes obtained from the relationship between ECso values and expose time corresponds to adaptability of test organisms to the toxicants. The adaptability of test organisms to the toxicants was much higher at higher slope values. Adaptability of E. coli on heavy metals increased in order to Zn > Cd > CU >> Cr> Hg.

• Korean Journal of Environmental Biology
• /
• v.20 no.4
• /
• pp.360-365
• /
• 2002

The variety and density of entomopathogenic nematodes from the polluted soils of heavy metals were examined. In order to investigate the pollution of heavy metals in soil, 300 sites in kyungsangbuk-do were collected from March to October in 2001. We measured the contents of seven heavy metal elements (Cd, Cu, As, Hg, Pb, Cr^{6+}$, CN) and than cheesed soil of 25 sites with high concentration of heavy metals. The seven strains of nematodes were isolated from seven samples by silkworm host (Bombyx mori mori) and white trap. Isolated nematodes are composed of two families, one order. The members of Rhabditida were isolated in the soil with mean Cd content of 0.870 ppm. And they were isolated in the soil samples with As content less than 0.745 ppm. However they were isolated regardless of concentration of Cu and Pb. The members of Cylindrocorpidae were isolated in the soil samples with Cr^{6+}$ content less than 0.05 ppm. Any entomopathogenic nematode was not detected in the CN polluted soil. Isolated nematodes successfully cultured on the silkworm host and were confirmed the pathogenicity, multiplicity, and tolerance against various condition of preservation. Which proved its potential usefulness as biological agent.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.8
• /
• pp.461-465
• /
• 2016

n-type silicon shows the better tolerance towards metal impurities with a higher minority carrier lifetime compared to p-type silicon substrate. Due to better lifetime stability as compared to p-type during illumination made the photovoltaic community to switch toward n-type wafers for high efficiency silicon solar cells. We fabricated the front electrode of the n-type solar cell with AgAl paste. The electrodes characteristics of the AgAl paste depend on the contact junction depth that is closely related to the firing temperature. Metal contact depth with p+ emitter, with optimized depth is important as it influence the resistance. In this study, we optimize the firing condition for the effective formation of the metal depth by varying the firing condition. The firing was carried out at temperatures below $670^{\circ}C$ with low contact depth and high contact resistance. It was noted that the contact resistance was reduced with the increase of firing temperature. The contact resistance of $5.99m{\Omega}cm^2$ was shown for the optimum firing temperature of $865^{\circ}C$. Over $900^{\circ}C$, contact junction is bonded to the Si through the emitter, resulting the contact resistance to shunt. we obtained photovoltaic parameter such as fill factor of 76.68%, short-circuit current of $40.2mA/cm^2$, open-circuit voltage of 620 mV and convert efficiency of 19.11%.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.427-434
• /
• 2009

Indigenous bacterium which shows a tolerance to high metal toxicity was isolated from soil concomitantly contaminated with oil and heavy metals. The characteristics of the bacterium for Pb and Cd biosorption was investigated under the various experimental conditions such as bacterial growth phase, the initial metal concentration, the input biomass amount, temperature and pH. The Langmuir adsorption isotherm modeling was described to know the capacity and intensity of biosorption. The low initial concentration of heavy metals and high biomass has a maximum heavy metal removal efficiency, but biosorption capacity of Pb and Cd has different values. Biosorption efficiency was highest in the end of the microbial growth stage and under pH 5~9 condition, but was less affected by temperature variation of 25~$35^{\circ}C$. The maximum biosorption capacity for Pb and Cd was 62.11 and 192.31 mg/g, respectively and each $R^2$ was calculated as 0.71 and 0.98 by applying Langmuir isothermal adsorption equation. Biosorption for Cd was considered as monomolecular adsorption to single layer on the surface of cells, whereas biosorption for Pb was considered as accumulation process into the cell by the microbial metabolism and precipitation reaction with anion of bacteria.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.217-221
• /
• 2017

BACKGROUND: For the food safety of cultivated mushroom, information on the safety of agricultural by-products imported as medium substrates for mushroom cultivation is urgently needed. Therefore, this study was performed to detect the presence of heavy metals, residual pesticides, and nutrient component in the imported medium substrates. METHODS AND RESULTS: Six kinds of medium substrates imported from nine countries from 2015 to 2017 were investigated. A mercury analyzer MA-2000 and an inductively coupled plasma spectrometer OPTIMA 7000DV were used to analyze mercury, lead, arsenic, copper, nickel and cadmium. All of these heavy metals were detected at lower level than heavy metal tolerance standard level of by-product fertilizer in Korea. When 246 kinds of residual pesticides were examined by GC and HPLC, imidacloprid, thiamethoxam and carbendazim were detected from Egyptian beet pulp, Indian cottonseed meal and cottonseed hull, respectively. The content of nutrient components (water, crude ash, crude fat, crude protein and crude fiber) varied among imported countries and the medium substrates. CONCLUSION:The presence of heavy metals and residual pesticides in imported medium substrates for mushroom cultivation was confirmed. For the safe production of mushroom, this study shows that imported medium materials for mushroom cultivation need to be managed through continuous monitoring.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.5
• /
• pp.620-628
• /
• 2015

A fungal strain, R9, was isolated from the South Atlantic sediment sample and identified as Aspergillus fumigatus. An antifungal protein, AfAFP_R9, was purified from the culture supernatant of Aspergillus fumigatus R9. AfAFP_R9 was identified to be restrictocin, which is a member of the ribosome-inactivating proteins (RIPs), by MALDI-TOF-TOF-MS. AfAFP_R9 displayed antifungal activity against plant pathogenic Fusarium oxysporum, Alternaria longipes, Colletotrichum gloeosporioides, Paecilomyces variotii, and Trichoderma viride at minimum inhibitory concentrations of 0.6, 0.6, 1.2, 1.2, and 2.4 μg/disc, respectively. Moreover, AfAFP_R9 exhibited a certain extent of thermostability, and metal ion and denaturant tolerance. The iodoacetamide assay showed that the disulfide bridge in AfAFP_R9 was indispensable for its antifungal action. The cDNA encoding for AfAFP_R9 was cloned from A. fumigatus R9 by RT-PCR and heterologously expressed in E. coli. The recombinant AfAFP_R9 protein exhibited obvious antifungal activity against C. gloeosporioides, T. viride, and A. longipes. These results reveal the antifungal properties of a RIP member (AfAFP_R9) from marine-derived Aspergillus fumigatus and indicated its potential application in controlling plant pathogenic fungi.

• The Korean Journal of Ecology
• /
• v.27 no.1
• /
• pp.15-20
• /
• 2004

With attention to different human activities around Anzali wetland and introduction of different pollutants containing heavy metals into this water ecosystem and absorption and accumulation of heavy metals in shell and muscle of Astacus leptodactylus which is native benthose of Anzali wetland and enjoys food and economic importance; Sampling of waters and sediments from 18 stations and shell and muscle of Astacus leptodactylus from 5 stations had been conducted. After biometric evaluation of Astacus leptodactylus, the chemical analysis of the samples by using international and standard methods and then their heavy metals content was determined by Atomic Absorpotion Spectrophotometer (AAS), model P.U 9400 philips. Result of the analysis stated that; 1) The mean values of Cr, Zn, Pb, Ni, V in Anzali waters were 6.4, 184.5, 28.8, 28.9, 47.1 ($\mu$ gr/lit) respectively, which comparing to the international standards, is not suitable for drinking, but it can be used for agricultural and aquacultural purposes. Even though the concentration of heavy metals in sediments were high, there are in range of acceptable limit for aquatics organisms; 2) Comparatively, the concentration of heavy metals in shell and muscle of Astacus leptodactylus in Anzali wetland (Cr, Zn, Pb, Ni, V in shell were 3.48, 109.3, 14.13, 7.17, 36.2 and in muscle were 2.98, 131.98, 3.12, 4.77, 9.05 ppm respectively) were more than what is determined for Aras dam (in shell were 1.6, 224.3, 7.8, 7.6, 10.3 and in muscle were 1.4, 60.2, 0.45, 2.7, 4.4 mg/kgr respectively); 3) For all samples, concentration of heavy metals in all Astacus leptodactylus in Anzali wetland and Aras dam, was at tolerance level for human consumption; 4) There was no association with significant difference between weight and size of Astacus leptodactylus with absorption and accumulation of heavy metals; but there was a significant association between heavy metals content in water and in sediments, and in sediments, shell and muscle of Astacus leptodactylus in Anzali wetland.