• Bulletin of the Korean Chemical Society
• /
• 제17권9호
• /
• pp.790-793
• /
• 1996

The azacrown compound, 1,7-dioxa-4,10,13-triazacyclopentadecane-N,N',N"-tri(methyl-acetic acid)(N3O2-tri(methylacetic acid)) was synthesized by modified procedure of Krespan. Potentiometric method has been used to determine the protonation constants of N3O2-tri(methylacetic acid) and stability constants of complexes on the divalent transition metal ions (Co2+, Ni2+, Cu2+, and Zn2+) and trivalent metal ions (Ce3+, Eu3+, Gd3+, and Yb3+) with N3O2-tri(methylacetic acid). The stability constants for the complexes of the divalent transition metal ions studied in the present work with N3O2-tri(methylacetic acid) were 11.4 for Co2+, 11.63 for Ni2+, 13.51 for Cu2+, and 11.65 for Zn2+, respectively. Thus, the order of the stability constants for complexes on the transition metal ions with N3O2-tri(methylacetic acid) was shown Co2+ < Ni2+ < Cu2+ > Zn2+ as same as the order of Irving-Williams series. The stability constants of Ce3+, Eu3+, Gd3+, and Yb3+ trivalent lanthanide metal ion complexes of N3O2-tri(methylacetic acid) were, respectively, 11.26 for Ce3+, 11.56 for Eu3+, 11.49 for Gd3+, and 11.80 for Yb3+. The values of the stability constants on trivalent metal ions with the ligand are increasing according to increase atomic number, due to increase acidity. But the value of stability constant of Gd3+ ion is less than the value of Eu3+ ion. This disordered behavior is also reported by Moeller.

• 한국연소학회지
• /
• 제10권4호
• /
• pp.10-17
• /
• 2005

Sustaining of flame stability of the burner installed in Dielsel exhaust pipe is very difficult because of steep fluctuation of pressure and flow rate. A burner for DPF (Diesel Particulate Filter) which clogged by collected soot regeneration has been made of metal fiber for the purpose of realization of flame stability even in unfavorable condition of Diesel engine exhaust. Flame stability of the metal fiber burner has been investigated in various condition of engine operation. It has been identified that metal fiber burner with liner which has swirl guide vane presents excellent flame stability even in the higher engine revolutions than 3000rpm and sudden variation. The results offer the possibility of development of full flow burner system for DPF regeneration.

• Bulletin of the Korean Chemical Society
• /
• 제26권3호
• /
• pp.393-398
• /
• 2005

The stability constants for the diaza-18-crown-6 ethers 2-6 and alkali metal cations ($Na^+,\;K^+,\;Rb^+\;and\;Cs^+$) were determined using potentiometry in 95% methanol. For each metal ion the stability constants of the partiallyfluorinated ligands 3-6 were larger than that of the non-fluorinated ligand 2, which might reflect an interaction between fluorine atoms and alkali metal cations. The stability constant of the ligand 4 was larger than that of the ligand 5 for each metal cation tested. This finding was also supported by the results of cation-induced chemical shifts in $^1H-,\;^{19}F$-NMR and extraction experiment. The potentiometry and NMR results as well as the X-ray crystal structures revealed that the position and number of fluorine atoms in the benzyl side arms was crucial for the enhanced interaction between a ligand and an alkali metal.

• Bulletin of the Korean Chemical Society
• /
• 제18권11호
• /
• pp.1158-1161
• /
• 1997

The potentiometric methods have been used to determined the protonation constants (logKiH) for the synthesized 1,7,13-trioxa-4,10,16-triazacyclooctadecane-N,N',N''-tri(methylacetic acid) [N3O3-tri(methylacetic acid)] and the stability constants (logKML) of the complexes of divalent and trivalent metal ions with the ligand N3O3-tri(methylacetic acid). The protonation constants of N3O3-tri(methylacetic acid) were 9.70 for logK1H, 9.18 for logK2H, 7.27 for logK3H, 3.38 for logK4H, and 2.94 for logK5H. The stability constants for the complexes of divalent metal ions with N3O3-tri(methylacetic acid) were 10.39 for Co2+, 10.68 for Ni2+, 13.45 for Cu2+, and 13.00 for Zn2+. The order of the stability constants for the complexes of the divalent metal ions with N3O3-tri(methylacetic acid) was Co2+ < Ni2+ < Zn2+ < Cu2+. The stability constants for the complexes of trivalent metal ions with N3O3-tri(methylacetic acid) were 16.20 for Ce3+, 16.40 for Eu3+, 16.27 for Gd3+, and 15.80 for Yb3+. The results obtained in this study were compared to those obtained for similar ligands, 1,7-dioxa-4,10,13-triazacyclopentadecane-N,N',N"-tri(methylacetic acid) and 1,7,13-trioxa-4,10,16-triazacyclooctadecane-N,N',N"-triacetic acid, which have been previously reported.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.688-692
• /
• 2002

The aminomethylation of phenols with para-substituents by the Mannich reaction has successfully been accomplished to produce the Mannich bases 2-6. The compounds 7-8 have also been synthesized in order to identify the effect of the side arms and t he macrocycle in the complex formation. Protonation constants and stability constants of the double armed diaza-18-crown-6 ethers 2-7 with metal ions have been determined by potentiometric method at 25 $^{\circ}C$ in 95 % methanol solution. Under a basic condition (pH > 8.0), the double-armed crown ethers 2-6 revealed stronger interaction with divalent metal ions than the simple diazacrown ether 1. The stability constants with these metal ions were Co 2+ < Ni2+ < Cu2+ > Zn 2+ in increasing order, which are in accordance with the order of the Williams-Irving series. The stability constants with alkali earth metal ions were Ca 2+ < Sr 2+ < Ba 2+ in increasing order, which may be explained by the concept of size effect. It is noteworthy that the hosts 2-6, which have phenolic side arms and a macrocycle, bind stronger with metal ions than the hosts 1 and 7. On the other hand, the host 8, which has phenolic side arms with a pyperazine ring,provided comparable stability constants to those with the host 3. These facts demonstrate that phenolic side arms play a more important role than the azacrown ether ring in the process of making a complex with metal ions especially in a basic condition. In particular, the log KML values for complexation of divalent metal ions with the hosts 2-6 had the sequence, i.e., 2 (R=OCH3) < 3 (R=CH3) < 4 (R=H) < 5 (R=Cl) < 6 (R=CF3). The stability constants of the hosts 5 and 6 containing an electron-withdrawing group are larger than those of the hosts 2 and 3 containing an electron-donating group. This substituent effect is attributed to the solvent effect in which the aryl oxide with an electron-donating group has a tendency to be tied strongly with protic solvents.

• 한국표면공학회지
• /
• 제48권1호
• /
• pp.11-22
• /
• 2015

Pd alloy hydrogen membranes for hydrogen purification and separation need thermal stability at high temperature for commercial applications. Intermetallic diffusion between the Pd alloy film and the porous metal support gives rise to serious problems in long-term stability of Pd alloy membranes. Ceramic barriers are widely used to prevent the intermetallic diffusion from the porous metal support. However, these layers result in poor adhesion at the interface between film and barrier because of the fundamentally poor chemical affinity and a large thermal stress. In this study, we developed Pd alloy membranes having a dense microstructure and saturated composition on modified metal supports by advanced DC magnetron sputtering and heat treatment for enhanced thermal stability. Experimental results showed that Pd-Cu and Pd-Ag alloy membranes had considerably enhanced long-term stability owing to stable, dense alloy film microstructure and saturated composition, effective diffusion barrier, and good adhesive interface layer.

• 대한화학회지
• /
• 제12권3호
• /
• pp.81-84
• /
• 1968

Stabilities of chelates of 7-nitroso-8-hydroxyquinoline-5-sulfonate have been determined for divalent transition metal ions, Mn(Ⅱ), Fe(Ⅱ), Co(Ⅱ), Ni(Ⅱ), Cu(Ⅱ), and Zn(Ⅱ) by means of the Calvin-Bjerrum technique. Comparison of these stability constants with those obtained for 8-hydroxyquinoline, and 8-hydroxyquinoline-5-sulfonate shows that the observed differences are essentially the results of the lower basicity of the sulfonated group and different metal-ligand bond. The divalent metal chelate stability sequence is not in agreement with the reported metal orders for other chelating agents. The stabilities were found to follow the order Mn(Ⅱ) < Fe(Ⅱ) ${\approx}$ Co(Ⅱ) > Ni(Ⅱ) < Cu(Ⅱ) > Zn(Ⅱ).

• 대한화학회지
• /
• 제68권2호
• /
• pp.87-92
• /
• 2024

The commercialization of rechargeable metal-air batteries is extremely desirable but designing stable oxygen reduction reaction (ORR) catalysts with non-noble metal still has faced challenges to replace platinum-based catalysts. The nonnoble metal catalysts for ORR were prepared to improve the catalytic performance and stability by the thermal decomposition of ZIF-8 with optimum cobalt loading. The porous carbon was obtained by the calcination of ZIF-8 and different loading amounts of Co nanoparticles were anchored onto porous carbon forming a Co/PC catalyst. Co/PC composite shows a significant increase in the ORR value of current and stability (500 h) due to the good electronic conductive PCN support and optimum cobalt metal loading. The significantly improved catalytic performance is ascribed to the chemical structure, synergistic effects, porous carbon networks, and rich active sites. This method develops a new pathway for a highly active and advantageous catalyst for electrochemical devices.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.78.1-78.1
• /
• 2010

The metal-supported solid oxide fuel cell (SOFC) was studied. Hydrocarbon fueled operation is necessary to make SOFC system. Different operating characteristics for metal-supported SOFC are used than for conventional ones as hydrocarbon fueled operation. Metal-supported SOFC was successfully fabricated by a high temperature sinter-joining method and the cathode was in-situ sintered. Synthetic gas, which is compounded as the diesel reformate gas composition and low hydrocarbons was completely removed by the diesel reformer. Metal-supported SOFC with synthetic gas was operated and evaluated and its characteristics analyzed. Button cell and $5{\times}5cm^2$ single stack were mainly operated and analyzed. Long-term operation using diesel reformate shows degradation, and degradation analysis was completed in the view of metal oxidation. Solution to increase stability of long-term operation was tried in the way of materials and operating conditions. Finally, $5{\times}5cm^2$ metal-supported single stack using synthetic gas was operated for 1000 hours under the modified condition.

• 소성∙가공
• /
• 제9권3호
• /
• pp.293-303
• /
• 2000

Recent developments of Fe technology make it possible to apply CAD/CAE/CAM techniques successfully to the stamping die design among the automotive parts industries. Those successful applications are greatly attributable to the development of commercial S/W. Up to now most commercial S/W for the analysis of sheet metal forming is based on the dynamic explicit algorithm. The main characteristics of dynamic explicit algorithm is that there is no convergence problem if the time increment is taken less than the stability limit. The stability of the analysis is guaranteed in the commercial code, since the adequate time increment is computed from the so called "Courant Condition". However excess computing time is often pointed out in the dynamic explicit analysis according to the characteristics of process parameters taken. In the study, various parameters that may affect the stability and the method how to improve computational efficiency of analysis have been investigated.estigated.