• 한국통신학회논문지
• /
• 제33권7B호
• /
• pp.488-501
• /
• 2008

Convergence of various wireless systems can be cost effectively achieved through enhancement of existing technology. The emergence of Wireless Mesh Network (WMN) entails the interoperability and interconnection of various wireless technologies in one single system. Furthermore, WMN can be implemented with multi-radio and multi-channel enhancement. A multi-radio, multi-channel wireless mesh network could greatly improve certain networking performance metrics. In this research, two approaches namely, clustering and topology control mechanisms are integrated with multi-radio multi-channel wireless mesh network. A Clustering and Topology Control Algorithm (CTCA)is presented that would prolong network lifetime of the client nodes and maintain connectivity of the routers.

• 중소기업융합학회논문지
• /
• 제2권1호
• /
• pp.25-31
• /
• 2012

최근 중소기업의 현장에서도 무선 통신 기술을 활발히 활용하고 있는 추세이다. 무선 메쉬 네트워크는 기존의 무선 네트워크의 단점을 해결하기 위한 차세대 네트워크 기술로 많은 연구가 이루어지고 있다. 무선 메쉬 네트워크는 802.11을 사용하므로 메쉬 클라이언트의 이동시 하드 핸드오버가 발생된다. 네트워크에서 핸드오버의 지연시간의 증가는 이동성에 있어 매우 큰 문제가 된다. 따라서 본 논문에서는 핸드오버 지연시간을 줄이기 위해 이전 채널 정보를 이용한 PCISS(Previous Channel Information based Selective Scanning)을 제안한다. PCISS 기법은 이동하는 메쉬 클라이언트가 가지고 있던 이전 채널 정보를 기반으로 채널을 검색하여 사용하기 때문에 핸드오버 지연시간의 90%이상을 차지하는 프로브지연(Probe Delay)을 최소화할 수 있다. 제안하는 PCISS 기법은 기존 전체 검색과 선택적 검색에 비해 핸드오버 지연 시간을 감소시켜, 링크계층에서 기존 방식보다 6.5배 빠르게 채널을 검색함을 증명하였다.

• 대한수학회지
• /
• 제51권4호
• /
• pp.679-702
• /
• 2014

Investigation of the numerical solution of singularly perturbed turning point problems dates back to late 1970s. However, due to the presence of layers, not many high order schemes could be developed to solve such problems. On the other hand, one could think of applying the convergence acceleration technique to improve the performance of existing numerical methods. However, that itself posed some challenges. To this end, we design and analyze a novel fitted operator finite difference method (FOFDM) to solve this type of problems. Then we develop a fitted mesh finite difference method (FMFDM). Our detailed convergence analysis shows that this FMFDM is robust with respect to the singular perturbation parameter. Then we investigate the effect of Richardson extrapolation on both of these methods. We observe that, the accuracy is improved in both cases whereas the rate of convergence depends on the particular scheme being used.

• Structural Engineering and Mechanics
• /
• 제31권4호
• /
• pp.383-392
• /
• 2009

The static and dynamic analyses of simply supported beams are studied by using the U-transformation method and the finite difference method. When the beam is divided into the mesh of equal elements, the mesh may be treated as a periodic structure. After an equivalent cyclic periodic system is established, the difference governing equation for such an equivalent system can be uncoupled by applying the U-transformation. Therefore, a set of single-degree-of-freedom equations is formed. These equations can be used to obtain exact analytical solutions of the deflections, bending moments, buckling loads, natural frequencies and dynamic responses of the beam subjected to particular loads or excitations. When the number of elements approaches to infinity, the exact error expression and the exact convergence rates of the difference solutions are obtained. These exact results cannot be easily derived if other methods are used instead.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제3권2호
• /
• pp.71-84
• /
• 2016

The finite element method is wide used in simulation in the biomechanical structures, but a lack of studies concerning finite element mesh quality in biomechanics is a reality. The present study intends to analyze the importance of the mesh quality in the finite element model results from humeral structure. A sensitivity analysis of finite element models (FEM) is presented for the humeral bone and cartilage structures. The geometry of bone and cartilage was acquired from CT scan and geometry reconstructed. The study includes 54 models from same bone geometry, with different mesh densities, constructed with tetrahedral linear elements. A finite element simulation representing the glenohumeral-joint reaction force applied on the humerus during $90^{\circ}$ abduction, with external load as the critical condition. Results from the finite element models suggest a mesh with 1.5 mm, 0.8 mm and 0.6 mm as suitable mesh sizes for cortical bone, trabecular bone and humeral cartilage, respectively. Relatively to the higher minimum principal strains are located at the proximal humerus diaphysis, and its highest value is found at the trabecular bone neck. The present study indicates the minimum mesh size in the finite element analyses in humeral structure. The cortical and trabecular bone, as well as cartilage, may not be correctly represented by meshes of the same size. The strain results presented the critical regions during the $90^{\circ}$ abduction.

• 한국통신학회논문지
• /
• 제29권11C호
• /
• pp.1592-1599
• /
• 2004

본 논문에서는 POSC 기반의 3D 메쉬 워터마킹 방법을 제안하였다. 제안한 방법에서는 3D 메쉬를 두 가지의 제약 조건 집합으로 수렴 조건을 만족할 때까지 반복 투영한다. 이들 집합은 워터마크를 삽입하기 위한 강인성 집합 및 비가시성 집합으로 구성된다. 원 모델없이 워터마크를 추출하기 위하여 제안한 방법에서는 워터마크가 삽입되는 위치 정보 및 결정치를 이용한다. 실험 결과로부터 제안한 방법이 메쉬 간단화, 절단, 아핀 변환, 및 랜덤 잡음 첨가 등의 공격에 우수한 강인성을 가짐을 확인하였다.

• 대한토목학회논문집
• /
• 제12권4호
• /
• pp.59-70
• /
• 1992

풍하중(風荷重)을 받는 쌍곡 냉각탑의 비탄성(非彈性), 비선형(非線型) 극한(極限) 거동(擧動)을 Cray Y-MP 슈퍼 컴퓨터에 개발(開發)한 유한요소(有限要素)컴퓨터 프로그램으로 연구(研究)하였다. 유한요소 망(mesh)을 각각 잘게 잘라서 3모델을 만들고, 이 모델들을 이용하여 탄성과 비탄성 해석으로 유한요소 망의 수렴관계(mesh convergence)를 연구하였다. 연구결과 유한요소의 크기가 냉각탑의 극한거동을 예측하는데 매우 중요한 역할을 하고있음을 볼 수 있었다. 비록 쌍곡 냉각탑이 풍하중(風荷重)에 대해서 막응력(膜應力)(membrane stress)으로 저항하나, 본 연구(研究) 결과(結果) 휨응력(應力)(bending stress)도 냉각탑의 파괴와 거동(擧動)에 매우 중요한 역할을 하고 있음을 알아 내었다. 해석(解析)한 냉각탑은 형성값(Shape factor)이 1.48에 이르렀고, 이는 냉각탑의 자오선 응력(meridional stress)이 원둘레방향으로 상당히 재분배 되고 있음을 보여주는 것이다. 이러한 재분배에 대한 사실은 배치된 철근의 항복이 바람방향 자오선으로부터 $30^{\circ}C$에 까지 나타난 것으로 더욱더 뚜렷하였다. 현재의 탄성해석을 이용하는 냉각탑 설계(設計) 방법은 안전(安全)측에 있음을 보여 주었으며, 1보다 큰 형상값을 설계시에 활용하기 위해서는 더욱더 많은 연구가 선행되어야 할 것이다.

• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.109-112
• /
• 2020

Many devices are connected on the internet to give functionalities for interconnected services. In 2020', The number of devices connected to the internet will be reached 5.8 billion. Moreover, many connected service provider such as Google and Amazon, suggests edge computing and mesh networks to cope with this situation which the many devices completely connected on their networks. This paper introduces the current state of the introduction of the wireless mesh network and edge cloud in order to efficiently manage a large number of nodes in the exploding Internet of Things (IoT) network and introduces the existing Network Time Protocol (NTP). On the basis of this, we propose a relatively accurate time synchronization method, especially in heterogeneous mesh networks. Using this NTP, multiple time coordinators can be placed in a mesh network to find the delay error using the average delay time and the delay time of the time coordinator. Therefore, accurate time can be synchronized when implementing IoT, remote metering, and real-time media streaming using IoT mesh network.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.112-114
• /
• 1996

In this paper a simple mesh refinement technique for finite element method is proposed using error estimation only on the material boundaries. The boundary errors are estimated by the continuity conditions of normal B field and tangential B field. From the error estimation fine meshes are accomplished on the boundary and propagate to the near region by Delanunay mesh tessellation. This adaptive mesh refinement technique is applied to the force calculation of magnetic clutch composed by several material regions and makes good convergence.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1926-1932
• /
• 2001

In this second part of the paper, the automatic mesh generation and remeshing algorithm using bubble packing method is applied to the nonlinear problem. The remeshing/refinement procedure is necessary in the large deformation process especially because the mesh distortion deteriorates the convergence and accuracy. To perform the nonliear analysis, the transfer of state variables such as displacement and strain is added to the algorithm of Part 1. The equilibrium equation based on total Lagrangian formulation and elasto-viscoplastic model is used. For the numerical experiment, the upsetting process including the contact constraint condition is analyzed by two refinement criteria. And from the result, it is addressed that the present algorithm can generate the refined meshes easily at the largely deformed area with high error.