• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6A
• /
• pp.965-979
• /
• 2001

본 논문에서는 OFDM 시스템의 송신기에서 사용되는 선형 필터와 고출력 증폭기의 결합에 의한 \"기억성을 갖는 비선형 왜곡\"을 실제 하드웨어 구현에 적합하게 적은 계산량으로 보상할 수 있는 참조 테이블(look up table; LUT) 기반의 사전왜곡기를 제안한다. LUT를 이용하는 사전왜곡기들은 이미 많이 연구되었으나, 본 논문에서는 다중 입력/단일 출력 형태의 기억성을 갖는 비선형 왜곡을 작은 크기의 LUT를 이용하여 효율적으로 보상한다는 점에서 큰 차이가 있다. 제안 방법에서는 먼저 기억성이 없는 고출력 증폭기만이 존재할 때의 사전왜곡기를 우리가 이미 제안한 고정점 반복 사전왜곡기 알고리즘에 기반하여 LUT로 구현하고, 여기에 선형 역 시스템을 결합하여 기억성을 갖는 비선형 왜곡을 보상한다. 실제 구현 가능성 검토를 위해 제안된 사전왜곡기와 16-QAM, 256-IFFT/FFT OFDM 시스템 기저대역 모뎀을 TMS320C30 DSP를 이용하여 구현하였으며, 실험 결과 작은 크기의 LUT를 이용하여도 원래의 고정점 반복 사전왜곡기에 비해 매우 적은 계산량을 요구하면서 동일한 성능을 얻을 수 있음을 확인하였다.있음을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.177-186
• /
• 2005

This paper introduces nonlinear estimators with reduced complexity, and proposes the Bussgang blind equalization algorithm employing the nonlinear estimators. The proposed algorithm utilized the facts that the Bayesian estimator is well approximated to the sigmoid estimator in initial stage of equalization with closed eye and is well approximated to the threshold estimator under open eye condition. The proposed method adopts selectively one of the two nonlinear estimators, i.e., the sigmoid estimator and the threshold estimator, according to channel distortion level at each iteration. As a result, by using the sigmoid estimator with reduced constellation, the proposed scheme, as it is applied to blind equalization of high-order QAM signals, simplifies the computational complexity extremely, and enhances the blind convergence capability and steady-state performance.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.228.1-228.1
• /
• 2012

Digital waveform generation technology for SAR payload can be divided into DDS(Direct Digital Synthesizer) method and Memory Mapped(M/M) method. DDS is the single chip which consists of the Sine Table, NCO(Numerically Controlled Oscillator), DAC, and so on. DDS method is a very simple method because the circuit configuration is not complex but has a disadvantage that can not control phase and amplitude easily by using NCO. M/M method has the complexity of the circuit configuration because it requires the memories which stores the waveforms, the control circuits, and DAC. And this method should apply the high interface technology for being compatible with the wide bandwidth of the digital signal and has the difficulty for PCB design because the number of the signal lines should be increased according to the number of the data bits for DAC. Although it has several disadvantages, this method has the capability of pre-distortion function which can compensate the phase and amplitude characteristics of the system and also has an excellent advantage to make any arbitrary waveform, so this method is considered as an important technology with DDS method. This research describes the technological trends of the waveform generator for the SAR payload and analyzes the characteristics of the technology.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.22-28
• /
• 2019

This paper presents the monitoring method of machining error and quality check to improve the productivity of boring manufacturing process. Machining error usually appears as the offset of spatial location of actual cutting path compared to ideal cutting path. In order to monitor an error of workpiece, multiple factors affecting quality of boring, such as distortion of workpiece, clamping error, radial rotation error of the spindle and motion error of machine tools, were took into account. To verify the productive quality, we propose the quality check system. The system based on IT convergence analyzes the process error rate and saves the analyzed data in memory. Also, these play important roles in detecting an inferior production goods and can decrease the production cost and loss of bearing.

• YAKHAK HOEJI
• /
• v.57 no.5
• /
• pp.369-375
• /
• 2013

Objective: Using the Korean Health Panel data (KHP) of 2008 and 2009, this paper analyzed the effect of antihypertension medication adherence on the changes in medical service utilization and medical expenditure in the next year. Method: Through a face-to-face interview survey, KHP has provided an extensive data on demographic characteristics, medical utilizations behavior, medical expenditure and health behaviors of the targeted households and their members since 2008. KHP is recognized as highly accurate regarding medical expenditure in that it makes the target households to record 'Health diary' whenever they use healthcare service, which could minimize their cognitive bias or memory distortion. The 2010 KHP data was based on the interview from 6,432 households and 19,697 household members. Two part model was used to explore the effects of medication adherence on medical use (logistic regression analysis) and medical expenditures (OLS). Result: Our study result demonstrated that the 74.7% of the patients who strictly adhere to their medication in both years, in 2008 and in 2009, were likely to use inpatient service in 2010. This shows the noncompliant patients were in fact use emergency service less than the compliant patients. Conclusion: Based on our analysis, this paper concludes that the high medication adherence of hypertensive patients could contribute to reduce the emergency service use. Therefore it is highly recommendable for the Korean government and the insurer, NHIS, to actively invest in developing education and promotion program to improve medication adherence among hypertensive patients.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.4
• /
• pp.189-198
• /
• 2015

Most IoT-related approaches have tried to establish the relation by connecting the network between things. The proposed research will present how the pervasive interaction of eco-system formed by touching the objects between humans and things can be recognized on purpose. By collecting and sharing the detected patterns among all kinds of things, we can construct the environment which enables individualized interactions of different objects. To perform the aforementioned, we are going to utilize technical procedures such as event-driven signal processing, pattern matching for signal recognition, and hardware in the loop simulation. We will also aim to implement the prototype of sensor processor based on Arduino MCU, which can be integrated with system using Arduino-Matlab/Simulink hybrid-interoperation environment. In the experiment, we use piezo transducer to detect the vibration or vibrates the surface using acoustic wave, which has specific frequency spectrum and individualized signal shape in terms of time axis. The signal distortion in time and frequency domain is recorded into memory tracer within sensor processor to extract the meaningful pattern by comparing the stored with lookup table(LUT). In this paper, we will contribute the initial prototypes for the acoustic touch processor by using off-the-shelf MCU and the integrated framework based on Matlab/Simulink model to provide the individualization of the touch-sensing for the user on purpose.

• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.697-707
• /
• 2019

This review paper deals with materials, classification, and a current article investigation on smart textile sensors for wearable vital signs monitoring (WVSM). Smart textile sensors can lose electrical conductivity during vital signs monitoring when applying them to clothing. Because they should have to endure severe conditions (bending, folding, and distortion) when wearing. Imparting electrical conductivity for application is a critical consideration when manufacturing smart textile sensors. Smart textile sensors fabricate by utilizing electro-conductive materials such as metals, allotrope of carbon, and intrinsically conductive polymers (ICPs). It classifies as performance level, fabric structure, intrinsic/extrinsic modification, and sensing mechanism. The classification of smart textile sensors by sensing mechanism includes pressure/force sensors, strain sensors, electrodes, optical sensors, biosensors, and temperature/humidity sensors. In the previous study, pressure/force sensors perform well despite the small capacitance changes of 1-2 pF. Strain sensors work reliably at 1 ㏀/cm or lower. Electrodes require an electrical resistance of less than 10 Ω/cm. Optical sensors using plastic optical fibers (POF) coupled with light sources need light in-coupling efficiency values that are over 40%. Biosensors can quantify by wicking rate and/or colorimetry as the reactivity between the bioreceptor and transducer. Temperature/humidity sensors require actuating triggers that show the flap opening of shape memory polymer or with a color-changing time of thermochromic pigment lower than 17 seconds.

• Korean Journal of Cognitive Science
• /
• v.28 no.3
• /
• pp.133-147
• /
• 2017

Human perception is an outcome of the influence of various factors rather than objective reflection of external environment. Among the factors, action-specific perception is a phenomenon where perception changes in terms of one's ability to act on the environment. Previous research reported contradictory results regarding whether action-specific perception occurs during performance or after performance due to memory distortion or knowledge about performance results. In this research, we conducted three experiments to determine when action-specific perception occurs. Participants threw darts at different distances and reported perceived size of targets in each trial. The results showed that, in Experiments 1 and 2, participants perceived targets larger when they hit than missed the targets, and the effect was greater when the targets were not visible after each throw. However, because participants had knowledge about the results of their throws, there could have been bias in participants' responses. In Experiment 3, where this possibility was excluded, we also obtained action-specific perception, and therefore concluded that action-specific perception occurs during but not after task performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2C
• /
• pp.110-120
• /
• 2003

In this paper, we propose a Multiresolution Motion Estimation(MRME) adapted to Low-Band-Shift(LBS) method in wavelet domain. To overcome shift-variant property on wavelet coefficients, the LBS was previously proposed. This method which is applied to reference frame in video coding technique, has superior performance in terms of rate-distortion characteristic. However, this method needs more memory and computational complexity. In this paper, The computational complexity of the proposed method(LBS-MRME) is about 15.6% of that of existing method at 3-level wavelet transform. And although it has about 7 times as much as existing method's motion vector since each subband has different motion vector, it decreases motion compensated prediction error by detailed motion estimation, and then has better efficient coding performance. The experimental results with the proposed method showed about 0.3∼11.6% improvement of MAD performance in case of lossless coding, and 0.3∼3.0㏈ improvement of PSNR performance at the same bit rate in case of lossy coding.

• Korean Institute of Interior Design Journal
• /
• v.23 no.4
• /
• pp.201-210
• /
• 2014

Recently, it is considered that the fashion flagship stores are being standardized as they are focusing only on external decorations and that they are hardly expressing their own intrinsic identities. That being the case, the fashion flagship stores are, now, pursuing diversity and are trying for any experimental designs in order to make their spaces more unique than those of other fashion flagship stores are, and regarding customers who would visit the stores, they have this desire to experience spaces, which are all unusual and different, just quickly while they shop. The topic of this study, depaysement which is making it unfamiliar, applies some unfamiliar a stimulus to people, and that makes the users remember this realization of original images and psychological stimuli as long as possible as leading the users to experience those spaces of special values. In the light of that, this study categorizes the features of depaysement into those groups, such as distortion of scales, juxtaposition of foreign materials, fantasy and ambiguity of a boundary, and analyzes the interior spaces of the fashion flagship stores. After all, this study applies depaysement to the fashion flagship stores' interior spaces, which have been all familiarized and standardized through some habitual relations, and works on different stimuli in order to invite the users to experiences of those totally new senses which are different from what the users have been felt in their daily lives. In the end, the study aims to propose ideas for how to design a place attractive enough to make the users revisit the place as after going through such memory process mentioned on the above.