• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.89-99
• /
• 1995

In this paper, we ecamined the effect that MCM-L technique influencess on the design and fabrication of multichip memory modules in increasing the packing desity of memory capacity and maximizing its electrical characteristics. For that purpose, we examined the effective methods of reducing the area of module layout and the wiring length with the variation of chip allocation and the number of wiring layers. We fabricated a 256K${\times}$8bit SRAM module with eight 32K${\times}$8bit SRAM chips. The routing experiment showed that we could optimize the area of module layout and wiring length by placing chips in a row, arranging module I/O pads parallel to chip I/O pads, and equalizing the number of terminal sides of module I/O's to that of chip I/O's. The routing was optimized when we used three wire layers in case of one sided chip mounting or five wire layers in case of double sided chip mounting. The fabricated modules showed 18.9 cm/cm$^{2}$ in wiring density, 65 % in substrate occupancy efficiency, and module substrate and functionally tested to find out the module working perfectly.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.161-164
• /
• 2002

Polycrystalline and epitaxial heterostructure films of $La_{0.5}Sr_{0.5}CoO_{3}/Pb(Nb_{0.04}Zr_{0.28}Ti_{0.68})O_{3}/La_{0.5}Sr_{0.5}CoO_{3}$ (LSCO/PNZT/LSCO) capacitors were evaluated in terms of low voltage and high speed operation in high density memory, using TiN/Pt conducting barrier combination. Structural studies for a high density ferroelectric memory process flow, which requires the integration of conducting barrier layers to connect the drain of the pass-gate transistor to the bottom electrode of the ferroelectric stack, indicate complete phase purity (i.e. fully perovskite) in both epitaxial and polycrystalline materials. The polycrystalline capacitors show lower remnant polarization and coercive voltages. However, the retention, and high-speed characteristics are similar, indicating minimal influence of crystalline quality on the ferroelectric properties.

• International journal of advanced smart convergence
• /
• v.9 no.3
• /
• pp.253-259
• /
• 2020

Most of today's large-scale cloud systems and enterprise data centers are distributing resources to improve scalability and resource utilization. NVMe-over-Fabric protocol allows submitting NVMe commands to a remote NVMe SSD through RDMA (Remote Direct Memory Access) network. It is attracting attention recently because it is possible to construct a disaggregation storage system with low latency through the protocol. However, the current I/O stack of NVMe-over-Fabric has an inefficient structure for maintaining compatibility with the traditional I/O stack. Therefore, in this paper, we propose a new mechanism to reduce I/O latency and CPU overhead by modifying I/O path of NVMe-over-Fabric to pass through legacy block layer. According to the performance evaluation results, the proposed mechanism is able to reduce the I/O latency and CPU overhead by up to 22% and 24% compared to the existing NVMe-over-Fabrics protocol, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2017

This paper presents an optimized adoption of NVM for the storage system of heterogeneous applications. Our analysis shows that a bulk of I/O does not happen on a single storage partition, but it is varied significantly for different application categories. In particular, journaling I/O accounts for a dominant portion of total I/O in DB applications like OLTP, whereas swap I/O accounts for a large portion of I/O in graph visualization applications, and file I/O accounts for a large portion in web browsers and multimedia players. Based on these observations, we argue that maximizing the performance gain with NVM is not obtained by fixing it as a specific storage partition but varied widely for different applications. Specifically, for graph visualization, DB, and multimedia player applications, using NVM as a swap, a journal, and a file system partitions, respectively, performs well. Our optimized adoption of NVM improves the storage performance by 10-61%.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.6
• /
• pp.521-531
• /
• 2009

Flash memory has physical characteristics different from hard disk where two costs of a read and write operations differ each other and an overwrite on flash memory is impossible to be done. In order to solve these restrictions with software, storage systems equipped with flash memory deploy FTL(Flash Translation Layer) software. Several FTL algorithms have been suggested so far and most of them prefer sequential write pattern to random write pattern. In this paper, we provide a new technique to efficiently store and maintain the B-tree index on flash memory. The operations like inserts, deletes, updates of keys for the B-tree generate random writes rather than sequential writes on flash memory, leading to inefficiency to the B-tree maintenance. In our technique, we convert random writes generated by the B-tree into sequential writes and then store them to the write-buffer on flash memory. If the buffer is full later, some sequential writes in the buffer will be issued to FTL. Our diverse experimental results show that our technique outperforms the existing ones with respect to the I/O cost of flash memory.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.237-245
• /
• 2023

In the cloud service, system resource such as CPU, memory, I/O bandwidth are shared among multiple users. Particularly, in Linux containers environment, I/O bandwidth is distributed in proportion to the weight of each container through the BFQ I/O scheduler. However, since the I/O scheduler can only be applied to conventional block storage devices, it cannot be applied to Zoned Namespace(ZNS) SSD, a new storage interface that has been recently studied. To overcome this limitation, in this paper, we implemented a weighted proportional I/O bandwidth sharing scheme for ZNS SSDs in dm-zoned, which emulates conventional block storage using ZNS SSDs. Each user receives a different amount of budget, which is required to process the user's I/O requests based on the user's weight. If the budget is exhausted I/O requests cannot be processed and requests are queued until the budget replenished. Each budget refill period, the budget is replenished based on the user's weight. In the experiment, as a result, we can confirm that the I/O bandwidth can be distributed on their weight as we expected.

• Journal of Internet Computing and Services
• /
• v.22 no.5
• /
• pp.57-67
• /
• 2021

Modern cloud computing is rapidly changing from traditional hypervisor-based virtual machines to container-based cloud-native environments. Due to limitations in I/O performance required for both virtual machines and containers, the use of high-speed storage (SSD, NVMe, etc.) is increasing, and in-memory computing using main memory is also emerging. Running a virtual environment on main memory gives better performance compared to other storage arrays. However, RAM used as main memory is expensive and due to its volatile characteristics, data is lost when the system goes down. Therefore, additional work is required to run the virtual environment in main memory. In this paper, we propose a hybrid in-memory storage that combines a block storage such as a high-speed SSD with main memory to safely operate virtual machines and containers on main memory. In addition, the proposed storage showed 6 times faster write speed and 42 times faster read operation compared to regular disks for virtual machines, and showed the average 12% improvement of container's performance tests.

• Journal of KIISE
• /
• v.43 no.4
• /
• pp.411-418
• /
• 2016

In recent times, NAND flash memory has become widely used as secondary storage for computing devices. Accordingly, to take advantage of NAND flash memory, new file systems have been actively studied and proposed. The performance of these file systems is generally measured with benchmark tools. However, since benchmark tools are executed by software simulation methods, many researchers get non-uniform benchmark results depending on the system environments. In this paper, we use Filebench, one of the most popular and representative benchmark tools, to analyze benchmark results and study the reasons why the benchmark result variations occur. Our experimental results show the differences in benchmark results depending on the system environments. In addition, this study substantiates the fact that system performance is affected mainly by background I/O requests and fsync operations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.710-716
• /
• 2008

This paper covers the performance evaluation of two flash memory-based file storages, NAND and NOR, which are the major flash types. To evaluate their performances, we set up separate file storages for the two types of flash memories on a PocketPC-based experimental platform. Using the platform, we measured and compared the I/O throughputs in terms of buffer size, amount of used space, and kernel-level write caching. According to the results from our experiments, the overall performance of the NAND-based storage is higher than that of NOR by up to 4.8 and 5.7 times in write and read throughputs, respectively. The experimental results show the relative strengths and weaknesses of the two schemes and provide insights which we believe assist in the design of flash memory-based file storages.

• The KIPS Transactions:PartA
• /
• v.14A no.3 s.107
• /
• pp.185-190
• /
• 2007

The necessity of error test module is increasing as development of embedded Linux device driver. This paper proposes the basic concept of freed memory error test module in the Linux device driver and designs error test module. The USB device driver is designed for freed memory error test module. I insert the test code to verify the USB device driver. I test the suggested error test module for the USB storage device driver. I experiment error test in this module.