• 한국멀티미디어학회논문지
• /
• 제22권7호
• /
• pp.790-803
• /
• 2019

The effects of different heat treatments on the sensory characteristics of abalones are studied in this study. In this paper, the sensory evaluation of abalone samples under different heat treatment conditions is carried out, and the evaluation results are analyzed. The three-dimensional (3D) scanning and reverse engineering are used in tooth modeling of the sensory evaluation of abalone samples under different heat treatment conditions. Besides, the chewing movement models are simplified into three modes, including the cutting mode, compressing mode and grinding mode, which are simulated using finite element simulation. The elastic modulus of the abalone samples is obtained through the compression testing using a texture analyzer to distinguish their material properties under different heat treatments and to obtain simulated mechanical parameters. Finally, taking the mechanical parameters of the finite element simulation of abalone chewing as input and sensory evaluation parameters as the output, BP neural network is established in which the sensory texture evaluation model of abalone samples is obtained. Through verification, the neural network prediction model can meet the requirements of food texture evaluation, with an average error of 9.12%.

• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.13-18
• /
• 2007

The mother Ni-W (1-5 wt.%) alloy billets for coated conductor substrate were fabricated by powder metallurgy process. The tensile test results for the sintered Ni-W rods showed the increase of mechanical strength and decrease of ductility with increasing W content due to the solid solution hardening. All the fracture surfaces of the tested specimens showed the typical ductile fracture mode of dimple rupture due to the local necking. The Ni-W alloy billets were made into tape by cold rolling. After the appropriate heat treatment for recrystallization, the brass texture formed by the cold rolling was converted to the complete cube texture. The in-plane and out of plane texture of the tapes estimated by x-ray pole figure were smaller than 9 degree and 7 degree, respectively. The effect of the W addition on the texture development seems not to be significant.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.184-187
• /
• 1999

The texture of electrodeposits is related to microstructure surface morphology and mechanical properties. When the electrodeposits annealed the recrystallization texture many be different from the original deposition texture. the <100> and <110> textures of nickel electrodeposits changed to the <100> and <{{{{ SQRT {310 } }}}}> textures when recrystallized The <100> and <{{{{ SQRT {310 } }}}}> mixed texture is changed to the <100> texture. The <002> texture of Zn electrodeposits didn't changed even after recrystallization.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1368-1374
• /
• 2018

In this paper, forced vibration was used to regulate the droplet migration, fully recording the transient migration of droplets on a micro-textured substrate under the resonance frequency by a high-speed camera. The influence of resonance frequency and dynamic migration characteristics of droplets on the solid micro-texture surface under lateral vibration were researched. The experiment demonstrates that the driving force is caused by the difference between the left and right contact angles made the droplet oscillate and migrate, and as time t increases, the left and right contact points are periodically shifted and the amplitude of migration increases. Therefore, based on the droplet migration behavior and its force balance mechanism, a spring vibration model of migration behavior of the vibrating droplet micro unit was set up to predict the complete trajectory of its migration on a solid surface. The calculation results show that the theoretical displacement is less than the experimental displacement, and the longer the time, the larger the difference. Affected by the vibration, part of the droplet permeates through the micro-texture, resulting in the droplet losing height and the contact angle becoming smaller as well. While the other part of droplet overcomes the internal surface tension to migrate.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2753-2758
• /
• 2003

Tactile sensation is essential for many manipulation and exploration tasks not only in a real environment but also in a virtual environment. In this paper, we discuss a conceptual design of an integrated tactile display system. The system comprises two parts: a 2 DOF force feedback device for kinesthetic display and a tactile feedback device for displaying the normal stimulation to skin and the skin slip/stretch. Psychophysical experiments measure the effects of fingerpad selection, the direction of finger movements and the texture width on tactile sensitivity. We also investigate characteristics of lateral finger movement while subjects perceive different textures. From the experimental results, the principal parameters for designing a tactile display are suggested. A tactile display device is implemented using eight piezoelectric bimorphs and a linear actuator, and is attached to a 2 DOF translational force feedback device to simultaneously simulate texture and stiffness of the object.

• Journal of Information Processing Systems
• /
• 제13권1호
• /
• pp.114-127
• /
• 2017

This paper proposes a color image coding algorithm based on shape-adaptive all phase biorthogonal transform (SA-APBT). This algorithm is implemented through four procedures: color space conversion, image segmentation, shape coding, and texture coding. Region-of-interest (ROI) and background area are obtained by image segmentation. Shape coding uses chain code. The texture coding of the ROI is prior to the background area. SA-APBT and uniform quantization are adopted in texture coding. Compared with the color image coding algorithm based on shape-adaptive discrete cosine transform (SA-DCT) at the same bit rates, experimental results on test color images reveal that the objective quality and subjective effects of the reconstructed images using the proposed algorithm are better, especially at low bit rates. Moreover, the complexity of the proposed algorithm is reduced because of uniform quantization.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.596-601
• /
• 2004

In this paper, we describe a study on the influence of the frequency variation of normal vibration using an integrated tactile display. It is necessary to consider this study because we want to find a method of displaying finer texture and know that the perception of fine textures is heavily influenced by temporal variation. Our tactile display system used in this experiment can simulate the micro shapes and roughness of surface textures by individual drives of a 6x8 pin array. Two experiments are performed. The first is a psychophysical experiment on the definition and range decision of roughness, and through the experiment, we clear up the meaning of roughness. The second is the main experiment about the frequency variation of normal vibration. We find the correlation between the vibration frequency and the texture and the condition for better display and perception of fine surfaces. The experimental results yielded two pieces of information. One is that lateral movement affects texture discrimination, and another is that normal vibration can make the perceived texture feel finer than real texture. That is, the vibrating stimulus is more effective for displaying a fine surface than static pressure, and it makes possible to display finer texture, exceeding the physical limit of the device.

• 소성∙가공
• /
• 제9권4호
• /
• pp.372-378
• /
• 2000

A process model including the effects of both the texture development and ductile damage evolution In plane strain rolling is presented. In this process model, anisotropy from deformation texture and deterioration of mechanical properties due to growth of micro voids are directly coupled Into the virtual work expressions for the momentum and mass balances. Special treatments in obtaining the initial values of field variables in the nonlinear simultaneous equations for the anisotropic, dilatant viscoplastic deformation are also given. Mutual effects of the texture development and damage evolution during plate rolling are carefully examined in terms of the distribution of strain components, accumulated damage, R-value as well as yield surfaces.

• Progress in Superconductivity
• /
• 제6권1호
• /
• pp.64-68
• /
• 2004

We fabricated cube-textured Ni and Ni-W alloy substrates for coated conductors and characterized the effects of W addition on microstructure, mechanical strength, and magnetic properties of the substrate. Pure Ni and Ni-(2, 3, 5at.%)W alloys were prepared by plasma arc melting, heavily cold rolled and then annealed at various temperatures of $600-1300^{\circ}C$. The texture was evaluated by pole-figure and orientation distribution function (ODF) analysis. Mechanical properties were investigated by micro Vickers hardness and tension test. Ferromagnetism of the substrate was measured by physical property measurement system (PPMS). It was observed that Ni-W substrates had sharp cube texture, and the full-width at half-maximums (FWHMs) of in-plane texture was $^{\circ}$-5.57$4.42^{\circ}$, which is better than that of pure Ni substrate. In addition cube texture of Ni-W substrates was retained at higher temperature up to $1300^{\circ}C$. Microstructural observation showed that the Ni-W substrates had fine grain size and higher mechanical properties than the pure Ni substrate. These improvements are probably due to strengthening mechanisms such as solid solution hardening and/or grain size strengthening. PPMS analysis showed that addition of W effectively reduced saturation magnetization in applied magnetic field and Curie temperature.

• 한국융합학회논문지
• /
• 제7권6호
• /
• pp.193-198
• /
• 2016

전기 도금한 도금 층의 집합조직은 전해조건에 의해 변화하는 것으로 알려져 있다. 도금층의 집합조직은 도금층의 미세조직과 표면 형상과 관계가 있으며 도금층의 기계적인 성질에 영향을 미친다. 그러므로 도금층의 집합조직의 변화양상의 이해는 매우 중요하다. 또한 전기도금 층은 열처리 됐을 때 재결정이 일어난다. 그 재결정 집합조직은 도금 층의 초기 성장 집합조직과 다르게 된다. 전기 도금한 도금 층의 그 미세조직, 표면 형상, 집합조직과 기계적인 성질은 용액조성, 과전압, pH, 전류밀도와 용액온도 등의 전해조건에 의해 변화한다. (111)과 (110)집합조직을 갖는 구리도금 층을 융합연구를 통해 황산 욕으로부터 얻을 수 있었다. 이 연구에서는 (110) 또는 (111)집합조직을 갖는 구리도금 층을 황산 욕에서 얻고, 그 (110) 또는 (111)집합조직으로의 변화와 기계적 성질을 설명할 수 있는 모델을 제시하였다.