• 대한기계학회논문집B
• /
• 제39권3호
• /
• pp.215-221
• /
• 2015

삼두박근 반사는 인체 상지에서 발생하는 대표적인 신장반사이며 경추의 이상 등을 판단하는데 중요한 역할을 수행한다. 본 연구에서는 이를 생체역학적으로 해석하기 위하여 새롭게 정의된 신장반사 해석 모델을 이용하여 해석적으로 상완 이두박근과 삼두박근의 근활성도 및 상완의 운동 정보를 예측하였다. 해석을 통해 예측된 운동 정보와 실험 결과가 같도록 하는 근활성도를 구하고, 이를 근전도 실험 결과와 비교하여 해석 모델과 방법의 타당성을 검증하였다. 제안된 모델과 실험을 통해 얻은 관절의 각도들의 최소자승오차는 0.056 으로 기존의 모델을 사용하여 얻은 오차의 절반 수준이다. 이것은 제안된 모델이 실제 현상과 잘 부합한다는 것을 나타낸다.

• 대한기계학회논문집B
• /
• 제37권4호
• /
• pp.405-413
• /
• 2013

4 가지 탄종(Gunvor, Glencore, Noble, ECM)의 촤 산화반응 특성을 $900^{\circ}C$에서 $1300^{\circ}C$까지의 노내온도와 대기압 조건에서 DTF(drop tube furnace)를 이용하여 실험하였다. 촤 반응률은 FT-IR 장비로 측정한 CO, $CO_2$ 농도와 이색온도계로 측정한 입자온도를 통해 계산되었고 고회분탄의 활성화에너지(E)와 pre-exponential 상수(A)는 아레니우스 방정식을 기초로 계산되었다. 실험 결과는 석탄의 회분 함량이 늘어남에 따라, 입자온도와 면적반응성이 감소하였다. 이러한 결과는 회분의 큰 열용량, 회분의 기화잠열과 상대적으로 적은 고정탄소의 함량으로 인한 연소성 저하로 사료된다. 결과적으로 고회분탄은 높은 활성화 에너지(E)를 가진다.

• 대한기계학회논문집B
• /
• 제38권1호
• /
• pp.57-62
• /
• 2014

인체 해석모델은 주로 인간이 의식적으로 행하는 운동을 중심으로 발전해 왔다. 의식적 운동과 달리 슬개건 반사는 뇌를 거치지 않고 일어난다. 본 연구는 건강한 성인의 슬개건 반사로 인한 대퇴부의 근력과 근활성도를 해석적으로 예측하고자 하였다. 해석 모델은 시상면에서 평면운동을 하고, 앉은 자세에서 상체와 허벅지를 고정시켜 종아리만 진자 운동이 가능하도록 모델링 하였다. 무릎은 레볼루트 조인트로 모델링 하였고, 발목관절은 고정시켜 종아리와 발을 하나의 강체로 가정하였다. 근력은 Mamizuka 의 실험 결과로부터 얻은 운동학 정보를 이용하여 역동역학 해석을 통해 구하였으며, 근활성도는 Hill-type 근육 모델을 이용하여 예측하였다. 해석 결과는 실험결과를 통해 검증되었다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제14권1호
• /
• pp.1-9
• /
• 2010

AMP-activated protein kinase (AMPK) protects various tissues and cells from ischemic insults and is activated by many stimuli including mechanical stretch. Therefore, this study investigated if the activation of AMPK is involved in stretch-induced cardioprotection (SIC). Intraventricular balloon and aorto-caval shunt (ACS) were used to stretch rat hearts ex vivo and in vivo, respectively. Stretch preconditioning reduced myocardial infarct induced by ischemia-reperfusion (I/R) and improved post-ischemic functional recovery. Phosphorylation of AMPK and its downstream substrate, acetyl-CoA carboxylase (ACC) were increased by mechanical stretch and ACC phosphorylation was completely blocked by the AMPK inhibitor, Compound C. AMPK activator (AICAR) mimicked SIC. Gadolinium, a blocker of stretch-activated ion channels (SACs), inhibited the stretch-induced phosphorylation of AMPK and ACC, whereas diltiazem, a specific L-type calcium channel blocker, did not affect AMPK activation. Furthermore, SIC was abrogated by Compound C and gadolinium. The in vivo stretch induced by ACS increased AMPK activation and reduced myocardial infarct. These findings indicate that stretch preconditioning can induce the cardioprotection against I/R injury, and activation of AMPK plays an important role in SIC, which might be mediated by SACs.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.518-524
• /
• 2016

The thermal aging effects on mechanical properties and microstructures in China low-activation martensitic steel have been tested by aging at $550^{\circ}C$ for 2,000 hours, 4,000 hours, and 10,000 hours. The microstructure was analyzed by scanning and transmission electron microscopy. The results showed that the grain size and martensitic lath increased by about $4{\mu}m$ and $0.3{\mu}m$, respectively, after thermal exposure at $550^{\circ}C$ for 10,000 hours. MX type particles such as TaC precipitated on the matrix and Laves-phase was found on the martensitic lath boundary and grain boundary on aged specimens. The mechanical properties were investigated with tensile and Charpy impact tests. Tensile properties were not seriously affected by aging. Neither yield strength nor ultimate tensile strength changed significantly. However, the ductile-brittle transition temperature of China low-activation martensitic steel increased by $46^{\circ}C$ after aging for 10,000 hours due to precipitation and grain coarsening.

• International Journal of Oral Biology
• /
• 제34권4호
• /
• pp.199-203
• /
• 2009

This study investigated whether orthodontic force influences the production of osteoprotegerin (OPG) and receptor activator of nuclear factor-kappa B ligand (RANKL) in vivo, both of which are affected by cortical activation. Mechanical force was applied to the maxillary premolars of orthodontic patients by fitting the transpalatal arch prior to cortical activation of the gingival tissue. Gingival crevicular fluid (GCF) samples were then collected from each patient using paper strips before and after 1, 3, 7 or 14 days of treatment. The OPG and RANKL levels in the GCF were determined by enzyme-linked immunosorbent assays. The levels of OPG were significantly increased after 1 day of fitting the appliance and decreased to basal levels at 3 days after fitting. In contrast, the RANKL levels were dramatically decreased at 1 day after fitting, but recovered to those of the untreated control at 3 days after the force application. The force-mediated changes in the OPG and RANKL levels of the GCF were unaffected by cortical activation during these experimental periods. Collectively, these results suggest that an acute and severe change between the OPG and RANKL levels plays an important role in stimulating the cellular responses required for alveolar bone remodeling by orthodontic treatment.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.349-356
• /
• 2002

For two kinds of 25Cr-20Ni stainless steels, STS310J1TB and STS310S with and without a small amount of Nb and N, creep behavior has been studied in a stress and temperature range from 147 to 392 MPa and from 923 to 773 K with a special reference to tertiary creep. The average creep life of STS310J1TB was about 100 times longer than that of the STS310S. The apparent activation energy for the initial creep rate was 330 kJ/mol in STS310J1TB, while that of the STS310S was 274kJ/mol in a power law creep region and 478 kJ/mol in a region of power law breakdown (PLB). The activation energy for STS310S below PLB is close to the for self-diffusion. When compensating for the temperature dependence of the Young's modulus and the omega value, it was found that the apparent activation energy for STS310J1TB was reduced to the activation energy for diffusion of chromium atom in gamma steel. The stress exponent of STS310S was about 12.3 above PLB and 5.1 in a power law creep region. Notwithstanding that the creep condition for STS310J1TB was in a power law creep region, its stress exponent was 7.9 larger than that of STS310S corresponding to the same creep conditions. This was ascribed to the presence of fine precipitates in STS310J1TB.

• 대한치과교정학회지
• /
• 제45권4호
• /
• pp.198-208
• /
• 2015

Objective: To quantify, for each activation, the effect of preactivations of differing distribution and intensity on the neutral position of T-loops (7-mm height), specifically the horizontal force, moment to force (M/F) ratio, and load to deflection ratio. Methods: A total 100 loops measuring $0.017{\times}0.025$ inches in cross-section were divided into two groups (n = 50 each) according to composition, either stainless steel or beta-titanium. The two groups were further divided into five subgroups, 10 loops each, corresponding to the five preactivations tested: preactivations with occlusal distribution ($0^{\circ}$, $20^{\circ}$, and $40^{\circ}$), gingival distribution ($20^{\circ}$), and occlusal-gingival distribution ($40^{\circ}$). The loops were subjected to a total activation of 6-mm with 0.5-mm iterations. Statistical analysis was performed using comprised ANOVA and Bonferoni multiple comparison tests, with a significance level of 5%. Results: The location and intensity of preactivation influenced the force intensity. For the M/F ratio, the highest value achieved without preactivation was lower than the height of the loop. Without preactivation, the M/F ratio increased with activation, while the opposite effect was observed with preactivation. The increase in the M/F ratio was greater when the preactivation distribution was partially or fully gingival. Conclusions: Depending on the preactivation distribution, displacement of uprights is higher or lower than the activation, which is a factor to consider in clinical practice.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1270-1273
• /
• 2004

The combination of methane-chemical activation and Self-propagating High-temperature synthesis (SHS) has widened the possibilities for both methods. For YBCO systems the investigation showed that a short-term mechano-chemical activation of initial powders before SHS leads to single-phase and ultra-fine products. A new technique for preparation ultra-fine high-temperature superconductors of YBCO composition with a grain size d < $1{\mu}m$ is developed. The specific feature of the technique is formation of the $YBa_2Cu_3O_{7-x}$ crystalline lattice directly from an X-ray amorphous state arising as a result of mechanical activation of the original oxide mixture. The technique allows the stage of formation of any intermediate reaction products to be ruled out. X-ray and magnetic studies of ultra-fine high temperature superconductors (HTS) are carried out. Dimension effects associated with the microstructure peculiarities are revealed. A considerable enhancement of inter-grain critical currents is found to take place in the ultra-fine samples investigated.

• Bulletin of the Korean Chemical Society
• /
• 제26권6호
• /
• pp.966-970
• /
• 2005

To measure the thickness of liquid films from 10 to 60 ${\mu}m$, we used photochromic dye activation. And we used silicone oil with 10 centi-Stokes and commercial photochromic dyes. To make films with exact and known thicknesses, we used two glass wafers. A film formed between two wafers after placing a drop of liquid of known volume on one wafer and covering the other. The film thickness could be estimated from the diameter of wafer and the dropped liquid volume. To quantitatively evaluate the result, captured the images using digital camera then analyzed the images using the image tool. The gray scale intensity using the captured images of activated dye with these thicknesses showed the repeatability below ${\pm}$ 1.0% when measured with a silicone oil solution containing 0.1% SO and SO-ANTH dyes. And we showed that photochromic dye activation method could be used to measure our liquid film thickness ranges.