• 한국광학회지
• /
• 제14권5호
• /
• pp.504-508
• /
• 2003

최근 전자산업계에 새롭게 널리 생산되는 마이크로 전자부품들은 왜곡이 최소화된 정밀한 외관 형상을 갖도록 제조되고 관리되지만, 측정 대상의 표면이 가시광 영역에서 광산란되는 특징을 가짐으로 인해, 기존의 피죠나 마이켈슨 형태의 비교간섭법으로는 고정밀의 삼차원 형상측정이 용이하지 아니하였다. 본 논문에서는 광섬유를 이용한 새로운 개념의 점회절 간섭계를 제안하고, 이를 광산란 거친표면의 대표적인 제품인 칩패키지와 실리콘 웨이퍼의 삼차원 형상 측정에 적용하였다. 측정결과 66 mm 측정영역에서 측정 형상오차 PV(peak-to-valley value) 5.6 $\mu\textrm{m}$, 분산값($\sigma$) 1.5 $\mu\textrm{m}$를 획득함으로써 기존의 비교 간섭 측정법에 비해 더욱 향상된 측정 정밀도를 획득하였다.

• 한국과학교육학회지
• /
• 제32권2호
• /
• pp.293-305
• /
• 2012

이 연구는 중 고등학생들의 측정 인식에 나타난 추론 유형을 분석하여 과학 교육의 시사점을 얻는 데 있다. 연구 대상은 중학생 197명과 고등학생 200명으로 하였다. 측정에 대한 인식 조사를 위하여 검사지 PMQ1을 사용하였고, 검사지의 문항별 응답 내용은 부호화된 분석틀을 기준으로 점 추론과 집합 추론 유형으로 분석하였다. 분석한 추론 유형을 자료 수집, 자료 처리, 자료 비교로 나누어 측정 단계별 추론 유형 분포 및 학년별 집합 추론 유형 분포 차이를 분석하였다. 또한 측정의 불확실성에 대한 추론 유형 분석을 통해 각 측정 단계별 나타난 추론 유형과 비교 분석하였다. 측정 단계별 추론 유형 분포에서 집합 추론 유형은, 자료 처리에서 높게 나타났고, 자료 수집과 자료 비교에서 낮게 나타났다. 측정 단계별 학년에 따른 집합 추론 유형 분포는 자료 비교 단계에서 중학생들과 고등학생들 사이에 유의미한 차이가 있었다. 측정의 불확실성에 대한 인식은 집합 추론 유형이 높게 나타났으나 학년에 따라 유의미한 차이는 없었다. 측정을 통해 신뢰할 수 있는 결과를 얻기 위해서는 각 측정 단계에서 측정의 불확실성에 대한 인식이 일관성 있게 작용해야 하며 이는 학생들에게 측정에 대한 직접적인 교수 학습이 필요함을 시사한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.556-560
• /
• 2005

The measurement method by Laser Speckle Interferometry which uses the interference law which will grow precedes and with it explains a resolution measurement ability and together the change of place arrowhead and general measurement, at real-time measurement sensitivity it has application boat song from candle precise measurement field it is increasing. But, currently the domestic application technique to sleeps and optical science military merit by optical science interferometer and directness it composes purchases to the level which it applies the expensive commercial business equipment the outside and in spite of the technical ripple effect is deficient even in many strong point. The hazard which complements like this problem point form technical development it leads from the research which it sees and an application degree and to sleep as the measurement equipment which tries to develop the small-sized optical science interference sensor and an interpretation program it raises it does.

• 한국연초학회지
• /
• 제26권2호
• /
• pp.168-178
• /
• 2004

Uncertainty of final measurement results considering main uncertainty sources being in nicotine of mainstream smoke was estimated. This study was accomplished by using the ISO 'The Guide to the Expression of Uncertainty in Measurement'. Using the two point re-calibration method, uncertainty for nicotine concentration was calculated considering the uncertainty sources of each step. The concentration and uncertainty of nicotine in mainstream smoke was estimated as $153.95{\pm}17.84\;{\mu}g/mL\;(0.77\pm0.089 mg/cig)$. The expanded uncertainty was $17.84 {\mu}g/mL(\pm0.089 mg/cig).$ The reported expanded uncertainty of the measurement is stated as the standard uncertainty of measurement multiplied by a coverage factor of 2, which for a normal distribution corresponds to a coverage probability of approximately $95\%$ The former expression indicates the conversion concentration into the sample.

• Smart Structures and Systems
• /
• 제3권3호
• /
• pp.373-384
• /
• 2007

For structural health monitoring (SHM) of civil infrastructures, displacement is a good descriptor of the structural behavior under all the potential disturbances. However, it is not easy to measure displacement of civil infrastructures, since the conventional sensors need a reference point, and inaccessibility to the reference point is sometimes caused by the geographic conditions, such as a highway or river under a bridge, which makes installation of measuring devices time-consuming and costly, if not impossible. To resolve this issue, a visionbased real-time displacement measurement system using digital image processing techniques is developed. The effectiveness of the proposed system was verified by comparing the load carrying capacities of a steel-plate girder bridge obtained from the conventional sensor and the present system. Further, to simultaneously measure multiple points, a synchronized vision-based system is developed using master/slave system with wireless data communication. For the purpose of verification, the measured displacement by a synchronized vision-based system was compared with the data measured by conventional contact-type sensors, linear variable differential transformers (LVDT) from a laboratory test.

• 한국항행학회논문지
• /
• 제4권1호
• /
• pp.45-49
• /
• 2000

GPS에 의한 관측치는 시각오차, 전리층과 대류층 지연오차, 다중경로 오차와 같은 다양한 오차를 내포하고 있어서 GPS 관측치 위치계산시 일반적으로 최소자승해를 구하게 된다. GPS 관측치는 비선형 방정식을 만족하므로 최소자승해를 구하기 위해서는 비선형 Newton 알고리즘을 이용할 수도 있으나 대개 간편성과 효율성 때문에 선형화 알고리즘을 적용하게 된다. 본 연구에서는 비선형 Newton 알고리즘이나 선형화 알고리즘을 대체할 수 있는 부동점 알고리즘을 개발하여 그 유용성을 증명하였다. 비선형 Newton 알고리즘이나 선형화 알고리즘은 수렴속도가 빠른 장점을 가지고 있으나 초기값이 해와 근사하여야 한다는 단점이 있다. 반면 부동점 알고리즘은 수령속도는 다소 느리나 초기값이 대단히 부정확하여도 수렴가능한 장점이 있으므로 두 알고리즘을 적절히 혼용하는 것이 좋을 것이다.

• 한국생산제조학회지
• /
• 제23권5호
• /
• pp.498-504
• /
• 2014

Displacements and strains are very important for material evaluation as critical factors to a machine's life cycle and safety. Typically, the strain gauge has been employed to measure displacement and strain. However, this contact-type measurement method has disadvantages that are not quantified under the test conditions of a specific object shape, surface roughness, and temperature. In this paper, the measurement of deflection and flexural strain due to the three-point bending test is presented, employing Digital Image Correlation (DIC) methods. In order to ensure measurement reliability, DIC and universal test machine methods were compared by measuring the deflections and flexural strains developed by such bending tests.

• 한국가구학회지
• /
• 제28권4호
• /
• pp.355-361
• /
• 2017

Indoor noise environment is an important factor when it comes to occupants comfort, especially in cafe. Results of the survey, 33.9% of occupants were feel unpleasant and sensitive about noise environment. Noise in cafe fluctuate depending on the finishing of both wall and ceiling, volume of the room, and the number of occupants in the room. Therefore, the noise meter device was used for measurement of various under conditions. Also, the subjective assessment of occupant noise was conducted through questionnaires. When the interior finish was exposed concrete, the maximum value of the noise measurement was 66.6 dB and the minimum value was 63 dB, respectively. Also, the result of subjective assessment of unpleasant noise were 5.43 and 4.96 point of 10 point of noise and echo, respectively. Otherwise, the interior finish was gypsum board, the maximum value of the noise measurement was 73.8 dB and the minimum value was 60.4 dB, respectively. Also, the result of subjective assessment of unpleasant noise were 3.88 and 3.95 point of 10 point of noise and echo, respectively. The results of the study showed that the noises and echoes in the cafes were lower than when did not.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.218-223
• /
• 2007

The dissipation of high-power ultrasonic energy at the faces of the defect causes an increase in temperature. It is resulted from localized selective heating in the vicinity of cracks because of the friction effect. In this paper the measurement of size and direction of crack using UET(Ultrasound Excitation Thermography) is described. The ultrasonic pulse energy is injected into the sample in one side. The hot spot, which is a small area around the crack tip and heated up highly, is observed. The hot spot, which is estimated as the starting point of the crack, is seen in the nearest position from the ultrasonic excitation point. Another ultrasonic pulse energy is injected into the sample in the opposite side. The hot spot, the ending point of the crack, is seen in the closest distance from the injection point also. From the calculation of the coordinates of both the first hot spot and the second hot spot observed, the size and slope of the crack is estimated. In the experiment of STS fatigue crack specimen(thickness 14mm), the size and the direction of the crack was measured.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권12호
• /
• pp.5948-5971
• /
• 2019

Estimating loss rates with the packet traces captured from some point in the middle of the network has received much attention within the research community. Meanwhile, existing intermediate-point methods like [1] require the capturing system to capture all the TCP traffic that crosses the border of an access network (typically Gigabit network) destined to or coming from the Internet. However, limited to the performance of current hardware and software, capturing network traffic in a Gigabit environment is still a challenging task. The uncaptured packets will affect the total number of captured packets and the estimated number of packet losses, which eventually affects the accuracy of the estimated loss rate. Therefore, to obtain more accurate loss rate, a method of strengthening packet loss measurement from the network intermediate point is proposed in this paper. Through constructing a series of heuristic rules and leveraging the binomial distribution principle, the proposed method realizes the compensation for the estimated loss rate. Also, experiment results show that although there is no increase in the proportion of accurate estimates, the compensation makes the majority of estimates closer to the accurate ones.