• 융합보안논문지
• /
• 제14권7호
• /
• pp.45-51
• /
• 2014

IoT시스템 품질확보를 목표로 하는 QoS 관리체계에서 가장 중요한 포인트는 품질 측정체계 설계와 품질평가 제도이다. 본 연구는 IoT시스템 구조와 기능 진단을 토대로 한 핵심품질 측정용 매트릭스 모델 연구이다. 특히 사물인터넷(IoT) 환경의 품질측정에 대한 메트릭스를 개발함으로써 사물 인터넷(IoT) 품질 측정/분석을 위한 기초를 제공한다. IoT시스템 품질평가용 매트릭스는 기능적 요구사항과 품질 요구사항을 하나의 통합 테이블에 기술하여 품질평가를 시행하는 방법이다. 기능적 요구사항과 품질 요구사항을 종합하여 연관성을 평가함으로써 평가 신뢰도와 활용성을 높일 수 있다. 제안된 방법 적용 시 IoT 품질은 신호처리, 프로세싱, 네트워킹 기능 등에서 보다 효율적인 품질확보의 토대가 되고 전체적으로 지연을 줄이면서 QoS를 향상 시킬 수 있다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.560-570
• /
• 1999

This paper formulates the suboptimal robust Kalman filtering problem into two coupled Linear Matrix Inequality (LMI) problems by applying Lyapunov theory to the augmented system which is composed of the state equation in the uncertain linear system and the estimation error dynamics. This formulations not only provide the sufficient conditions for the existence of the desired filter, but also construct the suboptimal robust Kalman filter. The proposed filter can guarantee the optimized upper bound of the estimation error variance for uncertain systems with parametric uncertainties in both the state and measurement matrices. In addition, this paper shows how the problem of finding the minimizing solution subject to Quadratic Matrix Inequality (QMI), which cannot be easily transformed into LMI using the usual Schur complement formula, can be successfully modified into a generic LMI problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.892-895
• /
• 1996

An unknown input observer is proposed that can be used in wheelbase preview control of commercial vehicles. The preview and state information, required to calculate actuator force, are reconstructed from the measurement variables such as heave and pitch acceleration. Gain matrix of observer is optimally selected so that influence of system and measurement noises on the estimation error can be minimized. Estimated preview information requires low pass filtering to eliminate high frequency components resulting from differentiation of noisy output signals. Effectiveness of the proposed method is demonstrated by numerical simulation of half car model.

• Transactions on Control, Automation and Systems Engineering
• /
• 제1권2호
• /
• pp.106-112
• /
• 1999

This paper presents an H$\infty$ controller design method for linear systems with time-varying delayed states, inputs, and measurement outputs. Using a Lyapounov unctional , the stability for delay systems is discussed independently of time delays . And a sufficient condition for the existence of H$\infty$ controllers of n-th order is given in terms of three matrix inequalities. Based on the positive-definite solutions of their matrix inequalities, we briefly explain how to construct H$\infty$ construct H$\infty$ controller, which stabilizes time-delay systems independently of delays and guarantees an H$\infty$ norm bound.

• 한국항해항만학회지
• /
• 제32권10호
• /
• pp.851-856
• /
• 2008

대규모 컨테이너항만의 건설과 함께 컨테이너 크레인의 생산성 향상으로 선박 체항시간을 단축시켜 항만의 서비스 수준을 높이려는 노력이 가속화되고 있다. 컨테이너 크레인 시스템에 가해지는 입력에 대하여 바람직한 성능을 보이도록 설계사양을 고려한 상태 퍼드백 제어시스템을 사용한다. 컨테이너 크레인에서 측정이 까다롭거나 측정 잡음이 클 것으로 예상되는 상태 변수를 추정하는 방법으로 상태 관측기를 설계하고자 한다. 기존의 연구에서는 상태 피드백 제어시스템의 피드백 이득행렬과 상태 관측기 이득행렬을 분리하여 구하였다. 그러나 본 연구에서는 피드백 이득행렬과 상태 관측기 이득행렬을 선정함에 있어 최근 강인한 탐색법으로 많이 사용되는 REGAs를 사용해 설계사양을 만족하도록 동시에 구하고자 한다.

• 제어로봇시스템학회논문지
• /
• 제22권6호
• /
• pp.411-416
• /
• 2016

This paper presents the design methodology of an unknown input observer for Lipschitz nonlinear systems with unknown inputs in the framework of convex optimization. We use an unknown input observer (UIO) to consider both nonlinearity and disturbance. By deriving a sufficient condition for exponential stability in the linear matrix inequality (LMI) form, existence of a stabilizing observer gain matrix of UIO will be assured by checking whether the quadratic stability margin of the error dynamics is greater than the Lipschitz constant or not. If quadratic stability margin is less than a Lipschitz constant, the coordinate transformation may be used to reduce the Lipschitz constant in the new coordinates. Furthermore, to reduce the maximum singular value of the observer gain matrix elements, an object function to minimize it will be optimally designed by modifying its magnitude so that amplification of sensor measurement noise is minimized via multi-objective optimization algorithm. The performance of UIO is compared to a nonlinear observer (Luenberger-like) with an application to a flexible joint robot system considering a change of load and disturbance. Finally, it is validated via simulations that the estimated angular position and velocity provide true values even in the presence of unknown inputs.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.75-80
• /
• 2004

Vehicle structures are composed of many substructure connected to one another by various types of mechanical joints. In vehicle engineering it is important to study these connected structures under various dynamic forces for the evaluations of fatigue life and stress concentration exactly. It is difficult to obtain the accurate load history of specified positions because of the errors such as modeling, measurement and etc. In the beginning of design exact load data are actually necessary for the fatigue strength and life analysis to minimize the cost and time of designing. In this paper, the procedure of practical dynamic force determination is developed by the combination of the principal stresses of F. E. Analysis and experiment. Least square pseudo inverse matrix is adopted to obtain in inverse matrix of analyzed stresses matrix. The error minimization method utilizes the inaccurate measured error and the shifting error that the whole data is stiffed over real data. The least square criterion is adopted to avoid these non. Finally, to verify the proposed procedure, a bus is analyzed. This measurement and prediction technology can be extended to the structural modification of any geometric shape in complex structure.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1621-1628
• /
• 2004

This paper proposes a design methodology for the robust observer using the eigenstructure assignment in multi-output systems so that the observer is less sensitive to the ill-conditioning factors such as unknown initial estimation error, modeling error and measurement bias in transient and steady-state observer performance. The robustness of the observer can be achieved by selecting the desired eigenvector matrix to have a small condition number that guarantees the small upper bound of the estimation error. So the left singular vectors of the unitary matrix spanned by space of the achievable eigenvectors are selected as a desired eigenvectors. Also, this paper proposes how to select the desired eigenvector based on the measure of observability and designs the observer with small gain. An example of a spindle drive system is simulated to validate the robustness to the ill-conditioning factors in the observer performance.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.39-44
• /
• 2003

It was shown that the robustness of deterministic observers with respect to modeling errors, measurement bias and round-off errors can be represented by a single performance index the condition number of the observer eigenvector matrix. In this paper, a robust observer for multi-output systems is designed using the left eigenstructure assignment, where the observer gain can not be determined uniquely with respect to the desired observer poles. Utilizing the eigenstructuer assignment for the robustness of the observer, the desired eigenvector matrix is selected to achieve the observer eigenvector matrix with the small condition number. The performance of the designed robust observer is evaluated in a spindle-drive simulation example where the load speed to be estimated based on the measured signals.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.406-410
• /
• 1991

This paper presents an improved algorithm of optimal measurement system design with a reliability evaluation method for large power system. The proposed algorithm is developed to consider the dummy bus and to achieve highest accuracy of the state estimator as well with the limited Investment cost. The dummy bus in the power system is impossible to install measurement meter, while real and reactive power measurement values are exactly zero. Thus, the effect on these dummy bus measurements is considered in the proposed algorithm. On the other hand, P/C model is developed by taking advantage of the matrix sparsity. The improved program is successfully tested for KEPCO system with PSS/E lineflow calculated data package.