• 보존과학회지
• /
• 제37권6호
• /
• pp.689-700
• /
• 2021

본 연구는 수초지의 한지에 있어서도 다양한 평량에 맞는 기본적인 내절도 측정조건이 요구됨에 따라 내절도 범위 부합과 측정시간 단축을 목적으로 하였다. 연구대상으로 평량 17 g/m², 30 g/m², 45 g/m²에 해당하는 외발초지 6종과 쌍발초지 6종, 평량 75 g/m² 복사지 1종 등 총 13종을 선정하고 발촉방향(LD), 발끈방향(CD)으로 각 24매씩 준비하였다. 연구방법으로 종이-내절 강도 시험에 따라 4연식 MIT 내절도 측정기를 이용하여 하중별(14.72 N, 9.81 N, 4.91 N) 내절도 실험과 시편폭별(15 mm, 10 mm, 5 mm) 내절도 실험을 순차 수행하였다. 연구결과, 평량 17 g/m²~45 g/m² 범위의 한지에 대하여 하중 4.91 N 조건과 시편폭 15 mm, 10 mm 조건이 내절도 기준범위인 10~10000회에 부합하였으며, 특히 시편폭 10 mm에 하중 4.91 N 조건이 내절도의 범위 축소와 측정시간 단축이 가능하였다. 또한, 평균값 기준 하중별 내절도 추세선과 시편폭별 내절도 추세선의 감소기울기를 통해 하중 범위, 시편폭 범위 내의 내절도 예측이 가능해졌다. 하중 4.91 N, 시편폭 15 mm 조건에서도 비교군의 내절도가 35~17723회로 기준범위 10~10000회를 크게 상회하므로 내절도 기준범위 부합과 측정시간 단축을 고려하여 하중 4.91 N, 시편폭 10 mm의 내절도 측정조건을 제안한다.

• 한국항공우주학회지
• /
• 제37권8호
• /
• pp.780-788
• /
• 2009

복합재 날개 구조물에 대한 구조 건전성 및 손상을 평가하기 위하여 정적 구조강도시험에 음향방출(AE)법이 응용되었다. 시험중 스트레인과 변위측정기법을 통하여 정적구조강도를 확인하였고, 음향방출요소 분석과 위치표정기법을 통하여 구조물의 내부 손상을 평가하고 손상위치를 찾을 수 있었다. 시험은 설계제한하중시험, 2차에 걸친 설계극한 하중시험, 파단시험이 수행되었다. 주요한 AE신호는 front lug근처의 표면에 부착된 센서에 의하여 감지되었다. 특히 1차 설계극한하중시험에서 스트레인 및 변위결과는 내부 손상을 보이지 않았으나 AE신호는 내부 손상이 이미 형성된 현상을 나타내었다. 파단시험에서는 AE활성도가 매우 활발하였고, 스트레인 및 변위의 결과는 심한 손상에 의하여 하중경로가 바뀌는 경향을 나타내었다. 음향방출법을 적용하여 정적 구조시험이 진행되는 동안 내부손상이 발생되는 하중과 위치를 정확하게 평가할 수 있었다. 본 연구로부터 음향방출법은 정적 구조강도시험에 있어 내부 손상을 평가하는데 유용한 기법임이 확인되었다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.298-302
• /
• 2017

With an increasing aging population and improved standards of living, more attention has been paid to health. Although walking exercise is known as an aerobic exercise, it imposes repeated and continuous impacts on the joints of the lower extremities. Therefore, when overweight gives a burden to the lower extremity or there is a joint disease, exercise limit occurs. The articular cartilage, weakened with age, also makes it difficult for the elderly to perform walking exercises. Accordingly, this study conducted a comparative analysis between regular walking using only the lower extremity and Nordic walking, which has been known as stable. For analysis, electromyography (EMG) was performed and the ground reaction force of the upper and lower extremities were measured in the same exercise. Integrated EMG (iEMG) revealed that the upper extremity muscles were more active in Nordic walking than in regular walking, where lower extremity muscles were relatively more inactive. In addition, when EMG measurements were performed at each measurement point during walking exercise, the pattern was different. Nevertheless, the result was the same as in iEMG. The load that occurs in each exercise was measured using the ground reaction force system. As a result, Nordic walking had a lower load than regular walking. Therefore, it was found that Nordic walking minimized the load on the lower extremities owing to the effect of whole-body exercise and was a safer and more efficient exercise method.

• 플랜트 저널
• /
• 제17권4호
• /
• pp.35-40
• /
• 2021

본 연구에서는 서인천복합 6호기 가스터빈 발전기계통에 대하여 기술특성시험을 실시하여 모델정수를 도출하고 검증하였다. 발전기 최대/최소 무효전력 한계시험 결과 최대 무효전력 한계는 80 MVar이고, 최소 무효전력 한계는 -30 MVar이다. 발전기는 GENROU 모델을 사용하였고, 계자시정수(T'do)는 4.077 s, 관성정수(H)는 5.461 P.U로 결정하였다. 여자시스템은 ESST4B 모델을 사용, 무부하 2% AVR 스텝시험을 모의하는 방식으로 모델정수를 도출하고 검증하였으며, PSS 모델링은 PSS2A 모델정수로 도출하였고, PSS Off/On일때 측정된 계측 데이터를 모의, 비교하여 검증하였다. 조속기-터빈는 GGOV1 모델을 사용하여 모델정수를 도출하고 검증하였다. PSS/E 시뮬레이션 프로그램을 통해 10% 조속기 스텝시험을 모의하여 결정된 조속기-터빈 모델정수의 수치 안정성을 확인하였다.

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.420-427
• /
• 2006

The structural and leakage integrity of steam generator tubes should be sustained against all postulated loads even if a crack is present. During the past three decades, most of the efforts with respect to integrity evaluation of steam generator tubes have been focused on limit load solutions but, recently, the applicability of elastic-plastic fracture mechanics was examined cautiously due to its effectiveness. The purpose of this paper is to introduce a testing method to estimate fracture resistance characteristics of steam generator tubes with a through-wall crack. Due to limited thickness and diameter, inevitably, the steam generator tubes themselves were tested instead of standard specimen or alternative ones. Also, a series of three dimensional elastic-plastic finite element analyses were carried out to derive closed-form estimation equations with respect to J-integral and crack extension for direct current potential drop method. Since the effectiveness of $J_{IC}$ as well as J-R curves was proven through comparison with those of standard specimens taken from pipes, it is believed that the proposed scheme can be utilized as an efficient tool for integrity evaluation of cracked steam generator tubes.

• 한국안전학회지
• /
• 제12권3호
• /
• pp.67-75
• /
• 1997

This paper presents a study on the application of Asynchronous Team(A-Team) theory for QVC(Reactive power control) and security assessment in a power system. Reactive power control problem is the one of optimally establishing voltage level given reactive power sources, which is very important problem to supply the demand without interruption and needs methods to alleviate a bus voltage limit violation more quickly. It can be formulated as a mixed-integer linear programming(MILP) problem without deteriorating of solution accuracy to a certain extent. The security assessment is to estimate the relative robustness of the system and deterministic approach based on AC load flow calculations is adopted to assess it, especially voltage security. A distance measure, as a measurement for voltage security, is introduced. In order to analyze the above two problem, reactive power control and static security assessment, In an integrated fashion, a new organizational structure, called an A-team, is adopted. An A-team is well-suited to the development of computer-based, multi-agent systems for operation of large-scaled power systems. In order to verify the usefulness of the suggested scheme herein, modified IEEE 30 bus system is employed as a sample system. The results of a case study are also presented.

• Journal of Biosystems Engineering
• /
• 제29권2호
• /
• pp.167-174
• /
• 2004

Density is a physical property which contains information relating to the internal quality of fruits and vegetables, and can be used as an index for nondestructive quality evaluation. Density sorting has been employed by farmers for some agricultural products since ancient times. In this study, an automatic density measuring system based on the platform scale or water displacement method was developed for density sorting of watermelon. It consisted of water tan, load cell, net tray, electric motor, limit switch, control system and its program. The resolution of density was 0.001 g/㎤. In order to calibrate and evaluate the accuracy, the density was measured using a balloon kept in cold water. It showed 1.002 g/㎤ which almost correspond to real density of water. Test results with 6 watermelons and 3 replications showed that the standard deviations of the dens were 0.001∼0.004 g/㎤. The relationship between density and internal quality of watermelon was investigated using the system. The densities of hollow watermelons were less than 0.950 g/㎤, it was apparent that the density of the watermelon was related to the degree of hollowness. But the soluble solid contents and internal defects could not be estimated from the density.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.6052-6059
• /
• 2012

본 논문에서는 전산실 파워라인의 고조파 문제를 다룬다. 전산실 UPS의 부하 측 각 상의 전압 및 전류는 한국전력공사 전기공급 약관의 규제치 전압 왜형률 5%와 전류 왜형률 5%, 그리고 KS C 4310 의 무정전 전원장치인 UPS의 출력측 고조파 전류 한도 5% 이하를 만족시켜야 한다. 그러나 측정 결과 전압 왜형률은 0.86%로 한국전력공사 규제치에 부합하나, 전류 왜형률은 34.98%로 한국전력공사 규제치인 5%를 초과하여 부적합하였다. 이에 대한 대책으로 AC필터를 설치한 결과 전류 왜형률이 15.22%로, 기준 값 이내에는 미치지 못하였으나 본래의 34.98%에서 절반에 가까운 수준에는 근접 하는 효과가 있었다.

• 한국정밀공학회지
• /
• 제30권7호
• /
• pp.741-748
• /
• 2013

A conventional packing ring was designed with a large clearance to prevent damage due to the vibration of the rotor, which can lead to an increase in steam leakage. In this study, a flexible packing ring using winding springs was developed to prevent damage to the rotor teeth by minimizing vibration, while maintaining a smaller clearance than that of conventional rotor designs. Theoretical analysis and finite element analysis (FEA) were used to design the winding spring to satisfy the specified allowable stress limit and minimum load requirements. The shape of the winding spring was designed by applying curves to the center and end parts of a flat spring. Computational fluid dynamics (CFD) analysis was used to predict the leakage of the flexible packing ring. Flow rate measurement tests were performed to verify the leakage reduction efficiency and the reliability of the CFD analysis.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.471-476
• /
• 1996

In this study, the method to use the phase shift keying (PSK) communication technique in smart transmitter is presented. In nuclear applications. smart transmitters for various parameters are expected to improve the accuracy of measurement and to reduce the load of calibration work. The capability of communication in field level is the most important merit of the smart transmitter. The most popular method is using of digital and analog techniques simultaneously - transmitting measurements from the field at 4∼20mA while modulating the current to carry digital information in both directions over the same twisted pairs. Conventional smart transmitters use the frequency shift keying (FSK) method for digital communication. Generally, however, the FSK method has the speed limit at 1200 bps. Amount of information to transmit becomes increasing as the processing technique is improved. The PSK method is noticeable alternative for high speed digital communication, but it has non-zero DC component. In order to use the PSK method in the field transmission with smart transmitter, the method to remove the DC component is studied in this work.