Characteristic Tests on the Gas Turbine Generator System for Determination and Verification of Model Parameters in a Combined Cycle Power Plant

복합화력발전소 가스터빈 발전기계통 모델정수 도출 및 검증을 위한 특성시험

  • Published : 2021.12.30

Abstract

In this study, a technical characteristic test was conducted on the gas turbine generator system of Seoincheon Combined cycle no.6 to derive and verify the model constants. As a result of the generator maximum/minimum reactive power limit test, the maximum reactive power limit is 80 MVar and the minimum is -30 MVar. The generator uses the GENROU model, the field time constant (T'do) is 4.077 s, and the inertial constant (H) is 5.461 P.U. Excitation system used ESST4B model to derive and verify model constants by simulating no-load 2% AVR step test, PSS modeling derived from PSS2A model constants, and simulated and compared measurement data measured when PSS off/on Did. The GGOV1 model was used for the governor-turbine, and the numerical stability of the determined governor-turbine model constant was verified by simulating a 10% governor step test through the PSS/E simulation program

본 연구에서는 서인천복합 6호기 가스터빈 발전기계통에 대하여 기술특성시험을 실시하여 모델정수를 도출하고 검증하였다. 발전기 최대/최소 무효전력 한계시험 결과 최대 무효전력 한계는 80 MVar이고, 최소 무효전력 한계는 -30 MVar이다. 발전기는 GENROU 모델을 사용하였고, 계자시정수(T'do)는 4.077 s, 관성정수(H)는 5.461 P.U로 결정하였다. 여자시스템은 ESST4B 모델을 사용, 무부하 2% AVR 스텝시험을 모의하는 방식으로 모델정수를 도출하고 검증하였으며, PSS 모델링은 PSS2A 모델정수로 도출하였고, PSS Off/On일때 측정된 계측 데이터를 모의, 비교하여 검증하였다. 조속기-터빈는 GGOV1 모델을 사용하여 모델정수를 도출하고 검증하였다. PSS/E 시뮬레이션 프로그램을 통해 10% 조속기 스텝시험을 모의하여 결정된 조속기-터빈 모델정수의 수치 안정성을 확인하였다.

Keywords

References

  1. 이용희, 2018, 발전기 모델정수 도출을 위한 부하각 보정 알고리즘에 관한 연구, 전남대학교, pp. 1
  2. 김동준, 2006, 발전기 안정도 해석 파라메타 도출 및 검증 기법 표준화 연구, 한국전력거래소, pp. 31
  3. 임승현, 2017, 발전기 기술특성시험을 이용한 발전기 모델정수 도출 및 검증, 충남대학교, pp. 2
  4. 산업통상자원부, 2019, 전력계통 신뢰도 및 전기품질 유지기준(고시 제2019-176호)
  5. 김용학, 곽노홍, 손현일, 신정훈, 심응보, 오세일, 차승태, 최준호, 2007, 전력계통 안정성 향상을 위한 발전기 제어계 특성 시험 및 모델링, 대한전기학회, pp. 473
  6. 김상돈, 2014, 산업플랜트 동기발전기 운전특성 및 특성데이터 취득 시험 연구, 고려대학교, pp. 74
  7. CWG & MVWG, 1997, Test Guidelines for Synchronous Unit Dynamic Testing and Model Validation, WECC. www.wecc.biz