• 제목/요약/키워드: measurement fusion

검색결과 368건 처리시간 0.03초

GPS/RTS data fusion to overcome signal deficiencies in certain bridge dynamic monitoring projects

  • Moschas, Fanis;Psimoulis, Panos A.;Stiros, Stathis C.
    • Smart Structures and Systems
    • /
    • 제12권3_4호
    • /
    • pp.251-269
    • /
    • 2013
  • Measurement of deflections of certain bridges is usually hampered by corruption of the GPS signal by multipath associated with passing vehicles, resulting to unrealistically large apparent displacements. Field data from the Gorgopotamos train bridge in Greece and systematic experiments revealed that such bias is due to superimposition of two major effects, (i) changes in the geometry of satellites because of partial masking of certain satellites by the passing vehicles (this effect can be faced with solutions excluding satellites that get temporarily blocked by passing vehicles) and (ii) dynamic multipath caused from reflection of satellite signals on the passing trains, a high frequency multipath effect, different from the static multipath. Dynamic multipath seems to have rather irregular amplitude, depending on the geometry of measured satellites, but a typical pattern, mainly consisting of a baseline offset, wide base peaks correlating with the sequence of main reflective surfaces of the vehicles passing next to the antenna. In cases of limited corruption of GPS signal by dynamic multipath, corresponding to scale distortion of the short-period component of the GPS waveforms, we propose an algorithm which permits to reconstruct the waveform of bridge deflections using a weak fusion of GPS and RTS data, based on the complementary characteristics of the two instruments. By application of the proposed algorithm we managed to extract semi-static and dynamic displacements and oscillation frequencies of a historical railway bridge under train loading by using noisy GPS and RTS recordings. The combination of GPS and RTS is possible because these two sensors can be fully collocated and have complementary characteristics, with RTS and GPS focusing on the long- and short-period characteristics of the displacement, respectively.

New Evaluation of Initial Growth Mechanisms of Hydroxyapatite on Self-assembled Collagen Nanofibrils by Using ToF-SIMS and AFM Techniques

  • Park, Young-Jae;Choi, Gyu-Jin;Lee, Tae-Geol;Lee, Won-Jong;Moon, Dae-Won
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.397-397
    • /
    • 2010
  • Bone is considered as hierarchically organized biocomposites of organic (collagen) and inorganic (hydroxyapatite) materials. The precise structural dependence between hydroxyapatite (HAp, $Ca_{10}(PO_4)_6(OH)_2)$ crystals and collagen fibril is critical to unique characteristics of bone. To meet those conditions and obtain optimal properties, it is essential to understand and control the initial growth mechanisms of hydroxyapatite at the molecular level, such as other nano-structured materials. In this study, collagen fibrils were prepared by adsorbing native type I collagen molecules onto hydrophobic surface. Hydrophobicity was introduced on the Si wafer surface by using PECVD (plasma enhanced chemical vapor deposition) method and cyclohexane as a precursor. Biomimetic nucleation and growth of HAp on the self-assembled collagen nanofibrils were occurred through incubation of the sample in SBF (simulated body fluid). Chemical and morphological evolution of HAp nanocrystals was investigated by surface-sensitive analytical techniques such as ToF-SIMS (Time-of-Flight Secondary Ion Mass Spectrometry) and AFM (Atomic Force Microscopy) in the early growth stages (< 24 hrs). The very initial stages (< 12 hrs) of mineralization could be clearly demonstrated by ToF-SIMS chemical mapping of surface. In addition to ToF-SIMS and AFM measurement, scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction analysis were conducted to characterize the HAp layer in the late stages. This study is of great importance in the growth of real bone-like materials with a structure analogous to that of natural bones and the development of biomimetic nanomaterials.

  • PDF

The Effect of Uncinate Process Resection on Subsidence Following Anterior Cervical Discectomy and Fusion

  • Lee, Su Hun;Lee, Jun Seok;Sung, Soon Ki;Son, Dong Wuk;Lee, Sang Weon;Song, Geun Sung
    • Journal of Korean Neurosurgical Society
    • /
    • 제60권5호
    • /
    • pp.550-559
    • /
    • 2017
  • Objective : Subsidence is a frequent complication of anterior cervical discectomy and fusion. Postoperative segmental micromotion, thought to be a causative factor of subsidence, has been speculated to increase with uncinate process resection area (UPR). To evaluate the effect of UPR on micro-motion, we designed a method to measure UPR area based on pre- and postoperative computed tomography images and analyzed the relationship between UPR and subsidence as a proxy of micro-motion. Methods : We retrospectively collected clinical and radiological data from January 2011 to June 2016. A total of 38 patients (53 segments) were included. All procedures included bilateral UPR and anterior plate fixation. UPR area was evaluated with reformatted coronal computer tomography images. To reduce level-related bias, we converted UPR area to the proportion of UPR to the pre-operative UP area (pUPR). Results : Subsidence occurred in 18 segments (34%) and positively correlated with right-side pUPR, left-side pUPR, and the sum of bilateral pUPR (sum pUPR) (R=0.310, 301, 364; p=0.024, 0.029, 0.007, respectively). Multiple linear regression analysis revealed that subsidence could be estimated with the following formula : $subsidence=1.522+2.7{\times}sum\;pUPR$($R^2=0.133$, p=0.007). Receiver-operating characteristic analysis determined that sum $pUPR{\geq}0.38$ could serve as a threshold for significantly increased risk of subsidence (p=0.005, area under curve=0.737, sensitivity=94%, specificity=51%). This threshold was confirmed by logistic regression analysis for subsidence (p=0.009, odds ratio=8.471). Conclusion : The UPR measurement method confirmed that UPR was correlated with subsidence. Particularly when the sum of pUPR is ${\geq}38%$, the possibility of subsidence increased.

천장관절융합술 후 기능 회복에 대한 추나요법을 포함한 한의복합치료 증례보고 1례 (A Case Report of Complex Korean Medicine Treatment Application Including Chuna Manual Therapy for Functional Recovery After Sacroiliac Joint Fusion)

  • 한윤희;박신혁;우현준;하원배;이정한
    • 척추신경추나의학회지
    • /
    • 제17권2호
    • /
    • pp.63-72
    • /
    • 2022
  • Objectives This case study aimed to investigate the effect of complex Korean medicine treatment including Chuna manual therapy on sacroiliac joint (SIJ) pain status post SIJ fusion with sacroiliac screw fixation. Methods Complex Korean medicine treatments including Chuna manual therapy were provided to patients with SIJ widening due to a traffic accident trauma. Measurement of range of motion and manual muscle test to evaluate functional activities of daily living was conducted before and after treatment. Moreover, outcome estimates were performed using the numeric rating scale, pain disability index, and EuroQol 5-dimension five-level questionnaire. Results After complex treatment, functional activities of daily living improved. Sacroiliac joint pain decreased and the quality-of-life score improved. Conclusions This study suggests that treatment with complex Korean medicine treatment including Chuna manual therapy may improve traumatic SIJ widening status post SIJ fusion. A postoperative rehabilitation protocol based on accumulated research results considering a multidisciplinary approach should be prepared to ensure holistic treatment.

다검출기 유도결합 플라즈마 질량분석기를 이용한 대형 규조류 규소 동위원소 분석법 (Silicon Isotope Measurement of Giant Diatoms Using MC-ICP-MS)

  • 최아영;류종식;형기성;김문기;나공태;정혜령;임현수
    • 한국지구과학회지
    • /
    • 제42권1호
    • /
    • pp.1-10
    • /
    • 2021
  • 규소(Si)는 지각의 구성 원소 중 두 번째로 흔히 존재하는 원소로, 3개의 안정동위원소, 28Si (92.23%), 29Si(4.67%), 30Si (3.10%)를 가진다. 규소 동위원소는 규소의 생지화학적 순환에 대한 지시자로 고환경 및 고기후 복원을 위해 전 세계에서 널리 연구되고 있다. 그러나 국내에서는 아직까지 생물 기원 규소에 대한 규소 동위원소 연구가 전무한 실정이다. 본 연구에서는 대형 규조류 시료에 대한 규소 동위원소 분석을 위해 기존 보고된 알칼리 용융법을 정리하고 생물 기원 규소 분석에 가장 적합한 규소 분리법을 구축하고자 하였다. 해당 시료를 고온 알칼리 용융을 통해 완전 용해시킨 후 시료 내 규소를 AG® 50W-X8 양이온 교환수지를 이용하여 효과적으로 분리하였다. 분리된 시료에 대한 신뢰성 검증을 위하여 Si 동위원소 표준물질(NBS-28) 및 USGS 암석 표준시료(AGV-2, GSP-2, BHVO-2)에 대한 분석을 함께 실시하였으며, 분석된 시료 모두 기존 연구결과와 오차범위 내에서 일치하는 값을 나타내었다. 본 연구에서 개발한 규소 동위원소 분석법은 향후 국내의 지구과학 및 관련 연구 발전에 많은 도움을 줄 것으로 기대된다.

Question Similarity Measurement of Chinese Crop Diseases and Insect Pests Based on Mixed Information Extraction

  • Zhou, Han;Guo, Xuchao;Liu, Chengqi;Tang, Zhan;Lu, Shuhan;Li, Lin
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제15권11호
    • /
    • pp.3991-4010
    • /
    • 2021
  • The Question Similarity Measurement of Chinese Crop Diseases and Insect Pests (QSM-CCD&IP) aims to judge the user's tendency to ask questions regarding input problems. The measurement is the basis of the Agricultural Knowledge Question and Answering (Q & A) system, information retrieval, and other tasks. However, the corpus and measurement methods available in this field have some deficiencies. In addition, error propagation may occur when the word boundary features and local context information are ignored when the general method embeds sentences. Hence, these factors make the task challenging. To solve the above problems and tackle the Question Similarity Measurement task in this work, a corpus on Chinese crop diseases and insect pests(CCDIP), which contains 13 categories, was established. Then, taking the CCDIP as the research object, this study proposes a Chinese agricultural text similarity matching model, namely, the AgrCQS. This model is based on mixed information extraction. Specifically, the hybrid embedding layer can enrich character information and improve the recognition ability of the model on the word boundary. The multi-scale local information can be extracted by multi-core convolutional neural network based on multi-weight (MM-CNN). The self-attention mechanism can enhance the fusion ability of the model on global information. In this research, the performance of the AgrCQS on the CCDIP is verified, and three benchmark datasets, namely, AFQMC, LCQMC, and BQ, are used. The accuracy rates are 93.92%, 74.42%, 86.35%, and 83.05%, respectively, which are higher than that of baseline systems without using any external knowledge. Additionally, the proposed method module can be extracted separately and applied to other models, thus providing reference for related research.

Evaluating LIMU System Quality with Interval Evidence and Input Uncertainty

  • Xiangyi Zhou;Zhijie Zhou;Xiaoxia Han;Zhichao Ming;Yanshan Bian
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제17권11호
    • /
    • pp.2945-2965
    • /
    • 2023
  • The laser inertial measurement unit is a precision device widely used in rocket navigation system and other equipment, and its quality is directly related to navigation accuracy. In the quality evaluation of laser inertial measurement unit, there is inevitably uncertainty in the index input information. First, the input numerical information is in interval form. Second, the index input grade and the quality evaluation result grade are given according to different national standards. So, it is a key step to transform the interval information input by the index into the data form consistent with the evaluation result grade. In the case of uncertain input, this paper puts forward a method based on probability distribution to solve the problem of asymmetry between the reference grade given by the index and the evaluation result grade when evaluating the quality of laser inertial measurement unit. By mapping the numerical relationship between the designated reference level and the evaluation reference level of the index information under different distributions, the index evidence symmetrical with the evaluation reference level is given. After the uncertain input information is transformed into evidence of interval degree distribution by this method, the information fusion of interval degree distribution evidence is carried out by interval evidential reasoning algorithm, and the evaluation result is obtained by projection covariance matrix adaptive evolution strategy optimization. Taking a five-meter redundant laser inertial measurement unit as an example, the applicability and effectiveness of this method are verified.

PPG 및 ECG 센서를 이용한 혈압추정 기법 개발 (Development of Blood Pressure Estimation Methods Using The PPG and ECG Sensors)

  • 박현문;이정철;황태호
    • 한국전자통신학회논문지
    • /
    • 제14권6호
    • /
    • pp.1257-1264
    • /
    • 2019
  • 기존의 Cuff 기반의 혈압(Blood Pressure)측정 방법은 연속적인 실시간 혈압측정에는 한계를 갖는다. 이러한 이유로 ECG와 PPG 센서 신호를 상호융합한 다양한 혈압추정이 이루어졌다. 그러나 PPG 중심에 측정기법은 AC 노이즈, 작은 맥동, 비박동 등의 많은 문제를 지니고 있다. 본 논문은 ECG와 PPG 관계에 발생하는 맥파전달시간(PTT)과 맥파속도(PWV)를 이용하여 혈압을 추론기법이다. 신호 피크를 이용하는 HRF(Height Ratio Features)에 비해, 본 제안방식은 ECG, PPG의 최고점 혹은 최저점을 사용한 시차를 이용해 추정하기 때문에 PPG 센싱 시그널의 오류에도 안정적인 추출이 가능한 장점이 있다. 본 논문에서 제안 방법을 이용하여 25만 회의 혈압측정의 결과 ±28.5%의 정확도를 갖는 혈압 추정기법을 제시할 수 있었다.

광전용적맥파 융합 알고리즘 보정을 위한 혈압 영향인자 상관관계 분석 (Analysis of Blood pressure influence factor Correction for Photoplethysmography Fusion Algorithm Calibration)

  • 김선칠
    • 한국융합학회논문지
    • /
    • 제10권2호
    • /
    • pp.67-73
    • /
    • 2019
  • 혈압측정은 오랜 시간동안 외부압력을 이용하여 혈관 압력 대응값으로 계산해왔다. 최근 측정 장비의 소형화와 의료네트워크 기술의 발전으로 개인 건강관리시스템의 활성화로 인해 간단한 센서로 혈압을 연속적이며 실시간 측정이 가능한 환경을 요구하고 있다. 본 연구에서는 광전용적맥파를 적용하고 맥파전달시간을 이용하여 혈압을 추정하고자 한다. 기존 방식은 신체 변수값 등으로 개인 오차를 줄여 측정하는 알고리즘을 사용하고 있으나, 광전용적맥파의 분석과 맥파전달시간의 적용방법에 따라 정확도가 떨어진다. 본 연구에서는 기존 수축기 혈압을 이용하여 혈압을 유추하는 융합적인 방법을 선택하여 적용하였다. 그리고 광전용적맥파 자체로만 혈압 추정이 가능하게 구성하여 초소형 혈압측정시스템을 만드는데 필요한 융합알고리즘을 제공하고자 하였다. 그 결과 수축기혈압과 광전용적맥파의 최대, 최소 주기간격을 이용하여 혈압추정 융합 알고리즘의 가능성을 상관관계로 분석하였다.

불활성기체용해-열전도도검출법에 의한 수소분석시 티타늄 및 지르코늄-2.5니오븀 시료의 매질효과 (Matrix effect of Ti and Zr-2.5Nb sample for hydrogen analysis by Inert Gas Fusion-Thermal Conductivity Detection(IGF-TCD) Method)

  • 박순달;최계천;김정석;조기수;김종구;김원호
    • 분석과학
    • /
    • 제16권4호
    • /
    • pp.261-268
    • /
    • 2003
  • 불활성기체용해-열전도도검출법에 의한 수소분석시 매질효과를 조사하기 위해 티타늄 및 지르코늄-2.5니오븀 매질의 수소 표준물질 및 수소기체 주입에 의한 교정계수를 측정하였다. 또한 주석 조연제를 사용하지 않고 티타늄 및 지르코늄-2.5니오븀 매질 수소 표준물질의 수소 추출효율을 조사하였다. 수소기체 주입에 의한 수소분석기의 보정에 대해 지르코늄-2.5니오븀 매질 수소표준물질의 그것은 2~3% 높았으며, 티타늄 매질의 수소 표준물질은 약 14% 높은 값을 주었다. 교정계수 측정결과에 의하면 티타늄 매질 시료의 수소추출 효율이 지르코늄-2.5니오븀 매질 시료에 비해 약 12% 낮을 것으로 예상된다. 주석을 사용하지 않았을 때 티타늄 및 지르코늄-2.5니오븀매질 수소 표준물질의 수소 회수율은 약 70% 이었으며, 티타늄의 수소 회수율이 지르코늄-2.5니오븀 보다 낮았다.