• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.605-608
• /
• 2002

This paper proposes a real-time wall charge measurement circuit for three-electrode AC PDP. It includes a charge-compensation network, current-integrating capacitors, initializing switches, and an op-amp. With this equipment, we measure the wall charge variations for the effects of sustain voltage, sustain pulse width, sustain frequency, and neighboring cells.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제46권2호
• /
• pp.155-171
• /
• 2007

One second grader, Junsu, was observed 4 times before and after formal multiplication lesson in Grade 2. This study describes how solution strategies in multiplication problems develop over time and investigates awareness of the relation between situation and computation in simple measurement and partitive division problems as informally experienced. It was found that Junsu used additive calculation for small-number multiplication problems but could not solve large-number multiplication problems and that he did not have concept of mathematical terms at first interview stage. After formal teaching, Junsu learned a variety of multiplication solution strategies and transferred from additive calculation to multiplicative calculation. The cognitive processing load of each strategy was gradually reduced. Junsu experienced measurement division as a dealing strategy and partitive division as a estimate-adjust strategy dealing more than one object in the first round.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2394-2398
• /
• 2013

Nicotine is the main component of environmental tobacco smoke, and its presence in indoor air is widely used as a secondhand-smoke indicator. Environmental tobacco smoke is a major source of indoor air pollution, but sufficient investigation of the uncertainty of its measurement, which mirrors the reliability of nicotine measurement, has not been performed. We calculated the uncertainty of measurement of indoor air nicotine concentration at low, medium, and high concentrations of 11.3798, 10.1977, $98.3768{\mu}g/m^3$, respectively, and we employed the Guide to the Expression of Uncertainty in Measurements (GUM), proposed by the International Organization for Standardization (ISO). The factors considered in determining the uncertainty were uncertainty of the calibration curve (calibration curve and repeated measurements), desorption efficiency, extraction volume, and sampling airflow (accuracy and acceptable limits of flowmeter). The measurement uncertainty was highest at low concentrations; the expanded measurement uncertainty is $0.9435{\mu}g/m^3$ and is represented as a relative uncertainty of 63.38%. At medium and high (concentrations, the relative uncertainty was 13.1% and 9.1%, respectively. The uncertainty of the calibration curve was largest for low indoor nicotine concentrations. To increase reliability of measurement in assessing the effect of secondhand smoke, measures such as increasing the sample injection rate ($1{\mu}L$ or more), increasing sampling volume to increase collected nicotine, and using gas chromatography-mass spectrometry (GC/MS) or GC/MS/MS, which has a lower quantitation threshold, rather than gas chromatography with nitrogen phosphorous detector, should be considered.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제27권1호
• /
• pp.91-110
• /
• 2024

본 연구의 목적은 이 통합모델인 직사각형 분할 모델을 초등학교 교실에서 교수·학습하였을 때, 학생들이 이 통합모델을 어떻게 이해하는지, 분수 나눗셈 상황들 사이의 관계를 어떻게 구성하는지 알아보는 데 있다. 이 연구를 통해 얻은 결론은 다음과 같다. 첫째, 제수의 역수를 곱하는 이유나 역수의 의미를 상기시키기 위해서 분수의 나눗셈식을 측정 맥락이나 단위 비율 결정 맥락으로 해석하여 계산 과정을 설명할 필요가 있다. 둘째, 직사각형 분할 모델은 분수의 나눗셈식을 측정 맥락으로 해석할 때 기존 모델에서 나타나는 우회적이거나 부적절한 부분을 보완할 수 있다. 또한 카테시안 곱의 역 맥락의 문제에서 표준알고리즘을 도출하기에 적절한 모델이라고 할 수 있다. 셋째, 카테시안 곱의 역 맥락에서 직사각형 분할 모델은 측정 맥락과 단위 비율 결정 맥락에서의 계산 과정을 자연스럽게 드러낼 수 있다. 그리고 하나의 나눗셈식이 왜 두 가지 해석이 가능한지를 보여줄 수 있어 통합모델로 사용할 수 있다.

• 대한인간공학회지
• /
• 제33권4호
• /
• pp.255-265
• /
• 2014

Objective: The purpose of this study was to evaluate comfort levels of functional and non-functional chairs using subjective comfort rating, interface pressure measurement, muscle activity measurement, and skin temperature measurement. Background: Chairs are used for a prolonged period of time for sitting in many places such as the office, at university, at school, in industry, and so on. Almost all people use chairs in their everyday life. The functional properties of the chair are associated with comfort. Method: The subjective evaluation contains questions regarding chair comfort which can be rated with five point scale. The body-seat interface pressure was measured using a pressure mat system. The symmetry of sitting was measured using electromyography. The change in body part (thigh and buttock) temperature before and after sitting on a chair was measured with an infrared camera. Results: Participants rated significantly (p < 0.05) higher comfort scores for the functional chair in relation to the buttock and thigh region. Also, the participants felt a better cushion effect in the functional chair. When using the functional chair, lower interface pressure, better thermal comfort, and better symmetry of erector spinae muscle activity were observed. Conclusion: Overall, interface pressure measurement, muscle activity measurement, thermal imaging and subjective comfort score results showed that the functional chair was more comfortable than the non-functional chair. Application: The adopted methodologies could be used to measure the seating comfort of train seats.

• 한국수자원학회논문집
• /
• 제43권12호
• /
• pp.1039-1050
• /
• 2010

본 연구에서는 괴산댐 하류 달천에서 6가지 직접 유량 측정 방법-유속면적법, 봉부자법, ADCP이동측정법, ADCP정지 측정법, 전자파표면유속계, LSPIV-을 적용하고, 이를 댐 방류량 및 유속면적법과 비교함으로써 정확도를 상호 평가하였다. 이를 위해 2005년부터 2010년까지 실시된 총 39회의 유량측정결과가 분석되었다. 댐 방류량과의 비교 결과, 봉부자법을 제외한 나머지5가지 방법은 평균 6.2% 이내의 절대값오차를 나타냈다. 유속면적법과 다른 4가지방법을 비교할 경우, 전자파표면유속계는 7.35%, 나머지 3가지 방법은 6% 이내의 절대값오차를 나타냈다. 봉부자법은 댐 방류량 및 유속면적법과 비교하여도 오차의 범위가 크게 나타났는데, 이에 대해서는 추가적인 검증이 필요하다.

• 한국전자파학회논문지
• /
• 제24권9호
• /
• pp.892-899
• /
• 2013

본 논문에서는 (서브)밀리미터파 대역에서 산란 계수 정밀 측정이 어려운 요인 및 보다 정확한 측정을 하기 위한 방안을 기술하였으며, G-band(140~220 GHz)에서의 측정 사례를 제시하였다. 우선 마이크로파 대역과 (서브)밀리미터파 대역에서 사용되는 산란 계수 측정시스템(벡터회로망 분석기)의 동작 원리에 대한 차이점을 파악하고, (서브)밀리미터파 대역 산란 계수 측정시스템을 보다 잘 운영하기 위한 방안을 기술하였다. 그리고 더 좋은 도파관 전송 특성 및 연결 반복도를 얻기 위한 방안과 반사 계수 크기가 작은 피측정기를 정밀 측정하기 위한 방안을 기술하였다.

• Journal of Periodontal and Implant Science
• /
• 제42권2호
• /
• pp.39-44
• /
• 2012

Purpose: Special care is necessary to avoid invading important anatomic structures during surgery when presurgical planning is made based on radiographs. However, none of these types of radiography represents a perfect modality. The purpose of this study was to determine the reliability of presurgical planning based on the use of two types of radiographic image (digital panoramic radiography [DPR] and cone-beam computed tomography [CBCT]) by beginner dentists to place implants, and to quantify differences in measurements between radiographic images and real specimens. Methods: Ten fresh cadavers without posterior teeth were used, and twelve practitioners who had no experience of implant surgery performed implant surgery after 10 hours of basic instruction using conventional surgical guide based on CBCT or DPR. Two types of measurement error were evaluated: 1) the presurgical measurement error, defined as that between the presurgical and postsurgical measurements in each modality of radiographic analysis, and 2) the measurement error between postsurgical radiography and the real specimen. Results: The mean presurgical measurement error was significantly smaller for CBCT than for DPR in the maxillary region, whereas it did not differ significantly between the two imaging modalities in the mandibular region. The mean measurement error between radiography and real specimens was significantly smaller for CBCT than for DPR in the maxillary region, but did not differ significantly in the mandibular region. Conclusions: Presurgical planning can be performed safely using DPR in the mandible; however, presurgical planning using CBCT is recommended in the maxilla when a structure in a buccolingual location needs to be evaluated because this imaging modality supplies buccolingual information that cannot be obtained from DPR.

• 한국가스학회지
• /
• 제6권1호
• /
• pp.17-23
• /
• 2002

피깅에서 얻어진 정보들 중에서 피그의 주행거리가 가장 기본이 되는 정보이며, 정확한 이동거리의 측정이 반드시 필요하게 된다. 배관은 일반적으로 buckles, winkles, cracks, dents, welding feints좌 같은 결함을 지니게 되는데, 이들 결함 주위에서는 주행거리계의 거동이 변화하게 된다. 특히 가장 높은 빈도로 나타나게 되는 결함은 배관의 12m마다 존재하는 welding points로서, 주행거리 측정오차 발생의 주요한 원인이 된다. 본 연구에서는 산업 현장에 실제로 적용할 수 있는 주행거리계의 개발뿐만이 아니라 welding points에서 변화하는 주행거리계의 거동을 해석하고, 발생하는 측정오차를 보정하였다. 또한 실험을 통해서 주행 속도에 따른 오차가 인정된 성능 범위내로 보정됨을 확인하였고. 그 유용성을 검증하였다.

• 센서학회지
• /
• 제13권5호
• /
• pp.363-368
• /
• 2004

A reliable voltage measurement system is necessary to monitor status of power facilities in substations, which is easy to set up and is not influenced by electromagnetic interference in and around substation. In this paper, we described a voltage measurement system (VMS) which is composed of a capacitive voltage probe, an impedance converter, and an optical linker. To get a wide-band characteristic of the VMS, a high speed impedance converter was used, and the output impedance of the VMS was set at $50{\Omega}$ to match any types of observing instruments. The frequency bandwidth of the VMS. which was estimated by a step pulse, was ranges from 11.42 Hz to 13.65 MHz, and the VMS showed a good response characteristic in a high frequency domain such as impulse voltages as well as a commercial frequency voltage.