Transactions of the Korean Society of Mechanical Engineers B
/
v.22
no.8
/
pp.1173-1182
/
1998
A throughflow analysis program for axial flow turbines is constructed, which can handle not only the two-dimensional multi-streamline (streamline curvature) method but also the one-dimensional mean line method. Calculations are performed for single stage and multi-stage axial flowturbines. For a wide operating range, the performance and flow field calculated by the present streamline curvature method are close enough to the test data. It is also revealed for the single stage turbine that the present analysis leads to far better correspondence with the experiment than other researchers" throughflow analyses. A special focus is put on the comparison of the results between the streamline curvature analysis and the mean line analysis. It is found that the mean line analysis can not predict the performance for highly off-designed conditions as accurately as the streamline curvature method, which shows the importance of considering the spanwise variation of loss and flow.
The objective of this study was to compare the two different eggshell lines of commercial layers on egg traits and egg production rate. Hy-line W-98 (white shell line; WSL) and Hy-line Brown (brown shell line; BSL) were used as experimental stocks. The birds in each line were allocated to three floor pens each containing 25-birds. They were fed a ration containing 15.5% CP and 2,700 ㎉/kg ME, and were supplied 16 h of light per day throughout the experimental Periods. The egg traits and egg Production rate were measured from 53 to 56-wk-old and 20 to 56-wk-old, respectively. The mean egg weight and the mean percentage albumen were significantly heavier and higher (P<0.05) in the BSL than in the WSL, respectively. The mean eggshell thickness and the mean percentage shell were also significantly thicker and higher (P<0.05) in the BSL than those in the WSL, respectively. However, the mean percentage yolk and the yolk to albumen ratio showed a reverse trend as shown in the mean percentage albumen or percentage eggshell. Although the WSL birds started laying 4 d earlier than the BSL ones, the overall mean egg Production rate for BSL during 20 to 56 wk of age was significantly higher (P<0.05) by 6.6% than the WSL. It was concluded that the eggs of brown eggshell line had heavier egg weight and thicker shell, and they had more percentage of albumen, but less percentage of yolk than those of the white eggshell line. These results suggest that the brown eggshell line raised on the floor might be more beneficial than the white eggshell line not only for the preference of the table egg consumers, but also for the efficient production of the eggs.
The static state estimation are divided into two groups; estimation and detection & identification. This paper centers on detection and identification algorithm. Especially, the identification of line errors is focused on and is performed by the extended W.L.S. algorithm with line swithching states. Here, line switching states mean the discrete values of line admittance which are influenced by unexpected line switching. The numerical results are obtained from the assumption that the noise vector is independent zero mean Gaussian random variables.
The objective of this study was to investigate the line-by-feed additive interaction on egg traits and yolk cholesterol level in laying hens. Hy-line W-98 (white shell line) and Hy-line Brown (brown shell line) were used as experimental stocks and three groups were assigned in each line. The age of hens used in this study were from 40- to 46-wk-old. Two different levels of chitosan were also used as additive in chicken diet. The first (CH$_{30}$) and second (CH$_{60}$) experimental groups were fed basal diet added 30mg and 60mg chitosan/kg feed, respectively. And the control group (CON) hens were fed with basal diet only. The eggs were collected and analyzed at the end of 40, 42, 44, and 46-wk-old. In the mean egg weight, the CH$_{30}$ in Hy-line Brown was significantly heavier (P<0.05) than CON, but the CH$_{30}$ in Hy-line W-98 was significantly lighter (P<0.05) than CON. Whereas, the mean egg weight did not significantly differ between CH$_{60}$ and CON in both line. The mean albumen percentage in Hy-line Brown did not show significant between experimental groups and control group. On the other hand, the mean albumen percentage of CH$_{60}$ in Hy-line W-98 was significantly lower (P < 0.05) than that of CON, but there was no significantly different between CH$_{30}$ and CON. In the mean yolk percentage, it showed a reverse trend as shown in the mean albumen percentage; there were significantly higher (P<0.05) in CH$_{60}$ than in CON fur the Hy-line W-98, and higher in CH$_{30}$ than in CON for the Hy-line Brown. However, the mean shell percentages did not significantly differ between experimental groups and control group in both lines. In the mean yolk cholesterol levels, the CH$_{30}$ and CH$_{60}$ in both lines were lower by 0.46 mg ∼2.80 mg per gram yolk than CON. Although the interaction effect of line-by-supplementing level of chitosan in hens diet on the pooled mean of yolk cholesterol level was no significant, it showed a highly significant interaction (P<0.01) at three of four experimental ages.
Kim, Dong-Yul;Cho, Yeong-Cheol;Sung, Iel-Yong;Yun, Dae-Kawn;Kim, Min-Uk;Kim, Ji-Uk;Son, Hyung-Suck;Son, Jang-Ho
Maxillofacial Plastic and Reconstructive Surgery
/
v.35
no.6
/
pp.368-375
/
2013
Purpose: This study is to evaluate the location of descending palatine artery, the anatomy of pterygomaxillary junction, and the association between the obtained anatomic values and several variables. Methods: We studied 40 patients who were treated for dentofacial deformites from January 2010 to December 2012 in Ulsan University Hospital, Ulsan, Korea. Cone beam computed tomogram (CBCT) was done for all patients. The reference point was approximately 5 to 7 mm above anterior nasal spine on axial image. We evaluated the location of the greater palatine canal (line a: on the coronal view, the shortest line between the center of greater palatine canal and pterygoid fossa; distance a: the distance of line a). We also measured the thickness (line b: on the coronal view, the shortest line between maxillary posterior sinus wall and pterygoid fossa; distance b: distance of line b), width (line c: on the coronal view, the line perpendicular to the line b and the nearest line from the most concave point of lateral pterygoid plate to the medial pterygoid plate; distance c: distance of line c) and height (line d: on sagittal view, the vertically longest line of pterygoid junction; distance d: the distance of line d) in pterygomaxillary junctions. We evaluated the association between the obtained anatomic values and several variables (sex, age, height and weight). Results: The mean distance a was 4.78 mm, mean distance b was 5.53 mm, mean distance c was 8.01 mm and mean distance d was 13.22 mm. The differences between age and mean distance c and weight and mean distance d in pterygomaxillary junctions are statistically significant. Conclusion: There apparently is anatomic variation of pterygomaxillary junctions by various values, particularly weight and age in a Korean clinical population.
Proceedings of the Korean Society for Technology of Plasticity Conference
/
2003.05a
/
pp.176-179
/
2003
The mean temperature prediction of strip is very important in hot strip finishing mill because of affecting on product quality and shape. Also, temperature can be used by basic information in other on-line control models with affecting control accuracy in factory. So, FE based on-line temperature model was developed for predicting strip mean temperature accurately in various process conditions and factory environments. There are many variables in affecting strip mean temperature in on-line states of factory. But some problems are occurred in considering all variables for making temperature model because of the bad efficiency of regression or fitting analysis. In this report, we have adopted dimensional analysis for solving these problems. We have many variables with dimensions affecting strip temperature but we are able to make non-dimensional variables less than dimensional variables from the combination of dimensional variables caused by PI-Theorem in fluid mechanics. The developed models are divided by two parts. The one is interstand temperature prediction model. The other is roll gap temperature model.
In this study, a program to design a multi-stage axial compressor is developed wi th mean-line analysis and vortex methods. In a preliminary design stage, a method. to design in a short time is needed and mean-line analysis is usually used for this purpose. Arbitrary pressure ratio and reaction can be assigned to generate overall geometry and several vortex methods are adopted to consider the radial distribution of velocity and reaction. The variation of performance, when we use free vortex, forced vortex, and exponential method, is compared and discussed.
The Reynolds-averaged Navier-Stokes equations for turbulent flow around a two-dimensional foil section moving ova. a flat surface (roller plate) is solved. The numerical method utilized the finite-difference schemes in collocated grids and the Baldwin-Lomax model is employed for turbulence closure. Calculations are carried out for three foil sections of different mean-line shape with various height ratio. As a foil approaches the bottom surface, the lift is augmented, while there exist some differences in pitching moment due to mean-line shape. It was found that the S-shaped mean line deteriorates lift characteristics but increases pitching moment to restore the designed height.
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.18
no.1
/
pp.17-23
/
1982
The corrosion loss of the shell plates and the bulkead plates of the oil tankers, nationalities of which belong to korea are determined and analyzed. The thickness of the plates are determined by use of the ultrasonic thickness meters at the check points set along the fore and aft line and the perpendicular to it. Difference between the original thickness and the determined one are given as the corrosion loss at the present age. 1. On the shell plates (1) The total mean of the corrosion loss shows the greatest value on the load water line in every age classes of the vessels. (2) The total mean of the corrosion loss on the fore and aft line shows little difference, even though it is slightly greater at the fore part, in every age classes of the vessels. (3) The corrosion loss along the perpendicular grows greater in the order of upper bilge line, light water line, freeboard line and load water line at 16 ages of the vessels, and the loss changes in the order of light water line, upper bilge line, freeboard line and load water line at 20 ages of the vessels. (4) The total mean of the corrosion loss along the light water line and upper and lower water line shows the greatest value on the fore part. That along the freeboard line and the load water line shows the greatest value on the midship part and on the after part, respectively. 2. On the bulkhead plates (1) The total mean of the corrosion loss shows the greatest value on the top part at the every age classes of the vessels. (2)The corrosion loss along the perpendicular grows greater in the order of the lower, center and upper part at every age classes of the vessels. (3) The total mean of the corrosion loss at the top part grows greater in the order of the transverse bulkhead of the side oil tank, that of center oil tank, longitudinal bulkhead of center oil tank, and transverse bulkhead of side water tank at the 20 ages of the vessels.
Huh, Man Hoee;Song, Jeong-Mo;Kim, Dal-Rae;Go, Byeong-Hui
Journal of Sasang Constitutional Medicine
/
v.4
no.1
/
pp.107-148
/
1992
The definitions of Four Constitution (Tae-Yang-In, So-Yang-In, Tae-Eum-In, So-Eum-In) in Four-Beginning-Theory (四端論) and Distribution-Theory (擴充論) were morphologically diagrammatized. the method of measuring the five parts came from the diagrams. The five parts are the followings; Top-Line is the distance between Rt. & Lt.Shoulders. Bosom-Line is the horizontal distance passing through the Rt. & Lt.nipples. Stomach-Line is the horizontal distance passing through the Rt. & Lt. acupuncture point Bool-Yong (不容穴). Navel-Line is the horizontal distance passing through the navel. Bottom-Line is the distance between the Rt.& Lt. anterior superior iliac spines. According to it, 311 people were measured in the clinic. Through the measured numerical values, to find out the objective propriety of the morphological diagrammings and the discriminating ability of Four Constitutions by the method of measuring the five, the author tried this study and got the following results. 1. On the ground of the Internal Organs-Theory (臟腑論), the definitions of Four Constitutions were classified and diagrammatized step by step and it was possible to draw the morphological graphs satisfying the reasonable condition objectively. 2. It was found that the graphings by Mean, Standard Deviation and 95% Confidence Interval for mean of the numerical values of five measured parts and the morphological diagrammings of the definitions in Four-Beginning Theory and Distribution-Theory drove to the same figures. 3. Through the method of the Analysis of variance and the Discriminant Analysis, it was discovered that the measured numerical values of five parts could distinguish the Four Constitutions. 4. Tae-Yang-In has the longest Top-Line and the shortest Bottom-Line. The Mean head of Confidence Interval from Top to Bottom is downwardly decreased at the rate of 3.7, 1.5, 1.8, 3.4. 5. So-Yang-In has the longest Top-Line and the shortest Bottom-Line. The Mean head of confidence Interval from Top to Bottom is downwardly decreased at the rate of 2.3, 1.5, 1.5, 1.1. 6. Tae-Eum-In has the longest Navel-Line. The Mean head of Confidence Interval from Navel to Top is upwardly decreased at the rate of 0.5, 0.4, 2.5 and downwardly decreased at the rate of 2.7 between Navel and Bottom. 7. So-Eum-In has the longest Bottom-Line. The Mean head of Confidence Interval from Bottom to Top is upwardly decreased at the rate of 1.1, 1.1, 1.8, 2.3. From the above findings, it was possible to draw the morphological graphings satisfying the objectively reasonable conditions in the definitions of Four-Beginning-Theory and Distribution-Theory and it was proved that the results of the Positive Analysis, carried with the measured numerical values of five parts from the diagramming, could show the objective propriety of the morphological graphings and the discerning ability of Four Constitutions by the method of measuring the five parts.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.