• 정보처리학회논문지B
• /
• 제14B권4호
• /
• pp.241-248
• /
• 2007

본 논문은 광학 흐름을 추정하는데 있어서 최적 정규화 매개변수를 결정하기 위한 L-curve 모서리 검출 방법을 제안한다. 기존의 곡률법은 L-curve의 곡률 그래프에서 최대 위치를 찾는 반면, 제안한 방법은 바로 우측 음의 계곡과의 곡률 차가 최대가 되는 양의 봉우리의 위치를 찾아서 매개변수 값을 결정한다. 이 방법으로 선정한 매개변수로 광학 흐름을 추정하면, 평균적으로 최소 오차로부터 단지 0.02 pixel/frame 차이가 나는 것이 실험을 통하여 보여진다. 또한 제안한 방법으로 기존의 모서리 검출법인 곡률법이나 적응 제거법에 비해 최소 오차에 가장 가까운 광학 흐름을 구할 수 있었다.

• Computers and Concrete
• /
• 제8권2호
• /
• pp.207-227
• /
• 2011

In flexural strength design of unconfined reinforced concrete (RC) members, the concrete compressive stress-strain curve is scaled down from the uni-axial stress-strain curve such that the maximum concrete stress adopted in design is less than the uni-axial strength to account for the strain gradient effect. It has been found that the use of this smaller maximum concrete stress will underestimate the flexural strength of unconfined RC members although the safety factors for materials are taken as unity. Herein, in order to investigate the effect of strain gradient on the maximum concrete stress that can be developed in unconfined flexural RC members, several pairs of plain concrete (PC) and RC inverted T-shaped specimens were fabricated and tested under concentric and eccentric loads. From the test results, the maximum concrete stress developed in the eccentric specimens under strain gradient is determined by the modified concrete stress-strain curve obtained from the counterpart concentric specimens based on axial load and moment equilibriums. Based on that, a pair of equivalent rectangular concrete stress block parameters for the purpose of flexural strength design of unconfined RC members is determined.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.397-406
• /
• 2000

Hopkinson effect in the HDDR-treated Nd$\sub$15/Fe$\sub$77/B$\sub$8/ alloy was examined in detail by means of a thermomagnetic analysis with low magnetic field (600 Oe). The emergence and magnitude of maximum in magnetisation in the thermomagnetic curve due to the Hopkinson effect was correlated to the grain structure and coercivity of the HDDR-treated material. the HDDR-treated materials showed clear Hopkinson effect (maximum in magnetisation just below the Curie temperature of the Nd$\sub$2/Fe$\sub$14/B phase) on heating in the thermomagnetic curve. Magnitude of the magnetisation rise due to the Hopkinson effect became smaller as the recombination time increased. The magnetisation recovery at room temperature on cooling from above the Curie temperature became smaller as the recombination time increased. The HDDR-treated materials with shorter recombination time, finer grain size and higher coercivity showed larger magnetisation maximum due to Hopkinson effect in the thermomagnetic curve.

• 한국농공학회지
• /
• 제11권4호
• /
• pp.1783-1790
• /
• 1969

It is one of the most economical method of soil stabilization works to compact soil, which increases soil density artificially. Compaction effort is to lessen void of soils, and consequently its aim is to enlarge friction and cohesion force, and reduce permeability of soil. Factors in compaction effort are moisture content, grain size, grain size distribution, physical properties, compaction method and temperature of soils etc. The results obtained in this study on the effects that grain size, gradation and physical properties influence upon compaction effort for 20 samples under the constant compaction method, are summarized as follows: 1. The bigger the maximum dry density is, the smaller the optimum moisture content is, on the other hand, the smaller the maximum dry densityis, the bigger the optimum moisture content is, ingeneral. 2. The coarser the grain size is, the bigger the maximum dry density is, and the optimum moisture content becomes small, and dry density-moisture content curve has the sharp peak, generally. Also, the finer the grain size is the smaller the maximum dry density is, and the optimum moisture content shows the big value, and dry density-moisture content curve has the dull peak. 3. The maximum dry density shows the biggest value on the sample to be about 15% of particles finer than No. 200 sieve. The more the percent passing of No. 10 sieve increase, the smaller the maximum dry density is. Soils which have uniformity coefficient less than 5 in particles larger than 0.074mm hardly show dry density-moisture content curve. 4. There is a relation which is ramax＝2.3948-0.0376 Wopt between the maximum dry density and the optimum moisture content, namely, the maximum dry density is increased in proportion to decrease of the optimum moisture content. 5. There are relations to be the straight lines which the maximum dry density decrease, on the other hand, the optimum moisture content increase in accordance with enlargement of Atterberg Limit(LL, PL, PL) in compacted soils.

• 한국해양학회지
• /
• 제8권2호
• /
• pp.75-77
• /
• 1973

1. 이용가능한 자료를 분석해 본 결과 우리나라 참조기의 평형어획곡선은 Schaefer model 보다 정방향으로 기울어져 있는 것으로 나타났다. 2. 시도해 본 여러 m치 가운데 m치가 0.2일 때 본연구에서 취급한 자료범위내에서는 가장 잘 맞는 평형어획곡선을 나타냈다. 3. m치가 0.2일때의 최대평형어획량은 37,306M/T로 나타났으며 1971년도의 흉어현상은 최대평형어획량을 훨씬 상회하는 1968년도의 어획량(45,392M/T)에 기인하는 것이 아닌가 추리된다.

• 한국전자파학회논문지
• /
• 제22권10호
• /
• pp.960-965
• /
• 2011

본 논문은 maximum likelihood(ML) 기반의 모노 펄스 monopulse ratio(MR) 커브에 대한 수학식 유도 과정을 보인다. 이를 위해 선형 배열 안테나를 가정하고 얻어진 수학식이 배열 소자의 수, 배열 간격의 함수가 됨을 보인다. 시뮬레이션을 통해서 얻어진 수학식이 MR 커브와 동일함을 보이고, 얻어진 복잡한 수학식을 하나의 tangent 함수로 근사화할 수 있음을 보인다.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.998-1005
• /
• 2010

Rifling force has a torsion impulse effect on the gun tube and thus generates undesirable vibration of the gun tube about its bore axis, putting additional stress on the projectile. High rifling force at the muzzle of the gun tube may adversely influence the trajectory of the projectile. And, the service life of rifled gun barrels is known to depend on the rifling force. Rifling force along the path of the projectile in the longitudinal direction of the gun tube can be described with projectile mass, projectile velocity, gas pressure curve and rifling angle. Under the same conditions, the character of the rifling of the gun barrel decisively influences the rifling force curve. To reduce the above mentioned harmful effect, locally distinct maximum of rifling force has to be avoided and maximum rifling force needs to be minimized. The best way to minimize the maximum rifling force is to design a rifling angle function so that the rifling force curve has a near trapezoidal shape. In this paper a new approach to make the optimal rifling force curve is described. The rifling angle determining the rifling force is developed by combined Fourier series and polynomial function to satisfy both the convergence and boundary condition matching problems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.347-349
• /
• 2005

This paper presents an efficient algorithm to estimate the maximum load level for heavily loaded power systems with the load-generation variation vector obtained by ELD (Economic Load Dispatch) and/or short term load forecasting while utilizing the elliptic pattern of the P-e curve. It is well known the power flow equation in the rectangular coordinate is fully quadratic. However, the coupling between e and f makes it difficult to take advantage of this quadratic characteristic. In this paper, a simple technique is proposed to reflect the e-f coupling effects on the estimation of maximum loadability with theoretical analysis. An efficient estimation algorithm has been developed with the use of the elliptic properties of the P-e curve. The proposed algorithm is tested on IEEE 14 bus system, New England 39 bus system and IEEE 118 bus system, which shows that the maximum load level can be efficiently estimated with remarkable improvement in accuracy.

• Structural Engineering and Mechanics
• /
• 제78권3호
• /
• pp.255-267
• /
• 2021

The analysis of simply supported single-cell skew-curved reinforced concrete (RC) box-girder bridges is carried out using a finite element based CsiBridge software. The behaviour of skew-curved box-girder bridges can not be anticipated simply by superimposing the individual effects of skewness and curvature, so it becomes important to examine the behaviour of such bridges considering the combined effects of skewness and curvature. A comprehensive parametric study is performed wherein the combined influence of the skew and curve angles is considered to determine the maximum bending moment, maximum shear force, maximum torsional moment and maximum vertical deflection of the bridge girders. The skew angle is varied from 0° to 60° at an interval of 10°, and the curve angle is varied from 0° to 60° at an interval of 12°. The scantly available literature on such bridges focuses mainly on the analysis of skew-curved bridges under dead and point loads. But, the effects of actual loadings may be different, thus, it is considered in the present study. It is found that the performance of these bridges having more curvature can be improved by introducing the skewness. Finally, several equations are deduced in the non-dimensional form for estimating the forces and deflection in the girders of simply supported skew-curved RC box-girder bridges, based upon the results of the straight one. The developed equations may be helpful to the designers in proportioning, analysing, and designing such bridges, as the correlation coefficient is about 0.99.

• 한국전자파학회논문지
• /
• 제23권6호
• /
• pp.748-751
• /
• 2012

모노 펄스 estimator의 성능은 Monopulse Ratio(MR) 커브에 의해 결정된다. 모노 펄스 estimator의 성능을 향상시키기 위해서는 배열 구조 파라메타와 관련된 MR 커브의 수학적 표현이 필요하다. 본 논문에서는 Maximum Likelihood(ML) 기반 모노 펄스 estimator의 MR 커브의 역함수를 이용한 모노 펄스 estimator를 제안한다. 평면 배열 모노 펄스 레이더 안테나에서 제안된 estimator의 MR 커브의 선형 영역을 확장시키는 과정을 보이고, 시뮬레이션을 통해 기존의 ML 기반 estimator와 성능을 비교한다.