• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 춘계학술대회논문집
• /
• pp.368-379
• /
• 2007

To investigate the dying properties of the extracts from different parts of Neolitsea sericea Koidz on Hanji, the dye materials were prepared from the extraction methods using $1{\ell}$ of hot water and alkaline solution with 40 g of leaves, bark, and wood each. K/S values and H (V/C) values of the Hanji dyed at different pH, temperature, time, and concentration of extract were determined using a spectrophotometer, and the maximum absorption wavelength of the dyed Hanji was 400 nm. From the analyzed data, the optimum dying conditions were pH 5 of dying solution, $70^{\circ}C$ of dying temperature, 40 minutes of dying time, and 100% of dye concentration. The color of dyed Hanji was Y to YR and color R- and RP-type could also be formed from the different treatment conditions. From the dyeing using mordants, amount of the bound dye materials was high in the pre-mordanted Hanji and in Hanji treated with extracts from the leaves. Also, the amount of the bound dye materials in the pre-mordanted Hanji was higher when aluminum and iron mordant was used rather than other mordants. Not likely with this, amount of the bound dye materials in the post-mordanted Hanji was higher when copper mordant was used. In color, Hanji treated extracts from the leaves appeared as Y-type and ones treated with extracts from bark and wood showed YR-type.

• Korean Chemical Engineering Research
• /
• 제49권1호
• /
• pp.95-100
• /
• 2011

본 연구에서는 유기 태양전지용 작은 밴드 갭 물질(p-형 반도체)의 개발 과정에서, 2,5-dioctyloxyphenylene(OP), 3-hexylthiophene(HT) 및 2,3-dimethylthieno[3,4-b]pyrazine(TP)을 반복단위로 갖는 올리고머(oligo(OP-HT-TP))를 합성하였다. Oligo(OP-HT-TP)는 측정 온도 범위에서 무정형 상태로 존재하였으며, 범용 유기용매에 잘 용해되었다. 필름상태에서 최대 흡수 파장은 716 nm이었으며, 밴드 갭은 대략 1.20 eV로 측정되었다. Oligo(OP-HT-TP)의 HOMO와 LUMO의 에너지 준위는 각각 -5.27 eV와 -4.04 eV로 측정되었다. 그러나, 이 올리고머의 최대 흡수 파장에서 흡광도는 유기태양전지의 제작에 있어서 현재까지 가장 많이 사용되고 있는 poly(3-hexylthiophene) 흡광도의 1/5보다도 더 작은 것으로 측정되었다.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.60-67
• /
• 2007

To investigate the dying properties of the extracts from different parts of Neolitsea sericea Koidz on Hanji, the dye materials were prepared from the extraction methods using $1{\ell}$ of hot water and alkaline solution with 40 g of leaves, bark, and wood each. K/S values and H (V/C) values of the Hanji dyed at different pH, temperature, time, and concentration of extract were determined using a spectrophotometer, and the maximum absorption wavelength of the dyed Hanji was 400 nm. From the analyzed data, the optimum dying conditions were pH 5 of dying solution, $70^{\circ}C$ of dying temperature, 40 minutes of dying time, and 100% of dye concentration. The color of dyed Hanji was Y to YR and color R- and RP-type could also be formed from the different treatment conditions. From the dyeing using mordants, amount of the bound dye materials was high in the pre-mordanted Hanji and in Hanji treated with extracts from the leaves. Also, the amount of the bound dye materials in the pre-mordanted Hanji was higher when aluminum and iron mordant was used rather than other mordants. Not likely with this, amount of the bound dye materials in the post-mordanted Hanji was higher when copper mordant was used. In color, Hanji treated extracts from the leaves appeared as Y-type and ones treated with extracts from bark and wood showed YR-type.

• 한국의상디자인학회지
• /
• 제19권1호
• /
• pp.135-145
• /
• 2017

In order to analysis on color difference of yellow natural dyes, I have dyed cellulose and protein fabrics. The results of experiment have been analysed by wavelength of maximum absorption, amounts of dye uptake, color difference, Hunter's value and Munsell's value. The results from these analyses are as follows : Bud of pagoda tree, Amur cork, and Curcuma showed greenish yellow color, Gardenia Jasminoides showed reddish yellow color. Barberry root showed reddish yellow color with post-mordanting method on cellulose fabric. Moreover, Dupioni silk was dyed in reddish yellow color by Barberry root and Rhubarb. In addition to Chroma index, Gardenia Jasminoides and Curcuma showed clear color overall. However, dyeing rayon and silk by Barberry root, and dyeing silk by Rhubarb showed clear color. Comparing all the results to actual dyed materials, Bud of pagoda tree had small dye uptake, and both ${\Delta}a$ and ${\Delta}b$ value were short which can't recognized the yellow color easily. Dye uptake of Amur cork and Gardenia Jasminoides was small just like Bud of pagoda tree. However, ${\Delta}b$ value order was Gardenia Jasminoides>Amur cork>Bud of pagoda tree. Therefore, Gardenia Jasminoides recognized reddish yellow because of big value of red color and yellow color. In case of Barberry root and Rhubarb which have larger dye uptake, Baberry root recognized yellow color on rayon only, and couldn't recognized yellow color on bleached cotton fabric, ramie, silk, and dupioni silk. Rhubarb recognized yellow color on rayon with pre-mordanting method only, but recognized silk and dupioni silk as brown like color. Moreover, we could not analyze color by dye uptake, Lab, and H(v/c) for Barberry root and Rhubarb. As a result, I think we need to attach color table for the research paper which handled the color of dyeing materials.

• 한국의류학회지
• /
• 제27권3_4호
• /
• pp.364-372
• /
• 2003

In this study, the characteristics of catechol tannin and pyrogallol tannin contained in Pteridium aquilinum were analysed by It spectrum. Silk fabrics were dyed with Pteridium aquilinum extracts using various mordants, and their dyeing properties were discussed. Additionally the fastness the water digestion, perspiration liquid digestion and light irradiation were investigated. IR spectrum of catechol tannin showed bands of O-H at $3417cm^{-1}$, C-H at $2930cm^{-1}$, C=0 at $1722cm^{-1}$, C=C at $1644cm^{-1},\;CH_2\;at\;1402cm^{-1}$. And IR spectrum of pyrogallol tannin showed bands of O-H at $3409cm^{-1}$, C-H at $3003cm^{-1}\;and\;2933cm^{-11}$, C=0 at $1701cm^{-1}$, C=C at $1582cm^{-11},\;CH_2\;at\;1410cm^{-1}$, CO at carboxylic acid and carboxylic acid ester at $1287cm^{-1}\;and\;1135cm^{-1}$. The maximum absorption wavelength of the extracts appeared at 270.0nm and 311.5nm. The optimum conditions for dyeing silk fabric with Pteridium aquilinum extracts were $80^{\circ}C$, 60min. Surface color of the silk fabric dyed with Pteridium aquilinum extracts was 2.7Y Surface color of the pre-mordanted fabrics with Al, Cu and Fe were 4.3Y, 2.5Y and 4.7Y, respectively. And Surface color of the post-mordanted fabrics with Al, Cu and Fe were 3.7Y, 2.8Y and 0.2GY. The water fastness and the alkaline perspiration fastness were improved in the Al-mordanted silk fabrics. By acidic and alkaline perspiration treatment, ${\Delta}E of the unmordanted fabrics was lower than hat of pre- and post- mordanted fabrics. Also after 40hour irradiation, ${\Delta}E of the unmordanted fabrics was lower than that of pre- and post- mordanted fabrics.

• 상하수도학회지
• /
• 제19권5호
• /
• pp.625-631
• /
• 2005

Disinfection characteristics of mixed oxidants produced by mean of electro-chemical method were evaluated. Inactivation rate of B. subtilis spore on the mixed oxidants were similar with that of chlorine. Based on the experimental results, activation energy of mixed oxidants and chlorine with B. subtilis spore at pH 8.3 were calculated as 30.8, $34.7kJ{\cdot}mol^{-1}$ respectively. UV absorption spectrum of both chlorine and mixed oxidants present similar. Molar extinction coefficients of chlorine and mixed oxidants at 292nm, which is maximum absorption wavelength of $OCl^-$ were 357, $377M^{-1}cm^{-1}$, respectively. Disinfectant decay rate and formation rate of THM in the S WTP filtrate also shows insignificant difference for both mixed oxidants and chlorine. In consequent, it was confirmed that high portion of chlorine presents in the mixed oxidants.

• Rapid Communication in Photoscience
• /
• 제2권1호
• /
• pp.24-27
• /
• 2013

A polymeric photobase generator containing oxime-urethane groups is applied to a fluorescence micropatterning material. Polymer bearing oxime-urethane groups was prepared by copolymerization of methyl methacrylate with methacryloyloxyethyl benzophenoneoxime urethane (MBU). The reaction of amino groups in the irradiated copolymer film with dansyl chloride (Dns-Cl) was monitored by using UV absorption, IR absorption and fluorescence spectroscopy. The fluorescence spectrum of the Dns-Cl-treated irradiated copolymer film shows a strong fluorescence with a fluorescence maximum wavelength at 510 nm. A blue fluorescent micropattern with a line width of $2{\sim}3{\mu}m$ was obtained. Treatment of the irradiated copolymer film with Dns-Cl and rhodamine B mixture led to the formation of green, red, and orange-colored fluorescence micropatterns. Thus, various colored micropatterns on a single polymer film can be obtained by selective excitation of each dye molecules.

• 약학회지
• /
• 제25권3호
• /
• pp.101-108
• /
• 1981

Quantitative determination of capsaicin in biological fluid was investigated. The pharmacokinetic study of capsaicin in rabbits was performed by high-pressure liquid chromatography, equipped with a microparticulate reversed-phase column and a fixed wavelength detector. Elution was carried out using methanolwater(70:30). It allows the quantitative determination at 8-400 ng level. When single dose of capsaicin(4mg/kg) was given to rabbits intravenously, the elimination phase was extremely short with average half-life to 17.35 minute. Urine excretion of capsaicin itself during first 2 hours after intravenous administration (4mg/kg) was 0.004-0.04% of the administered amount. The maximum plasma concentration of capsaicin after oral administration (300mg/kg) was $4{\times}10^{-7}$g/ml at 40 minutes. The $LD_{50}$ of capsaicin in mouse was 0.40mg/kg (i.v.) and 47.2 mg/kg (p.o.) which was determined by Litchfield and Wilcoxon's method, suggesting that the gastrointestinal absorption of capsaicin is poor.

• Current Optics and Photonics
• /
• 제7권2호
• /
• pp.200-206
• /
• 2023

Near-infrared (NIR) sensing technology using CMOS image sensors is used in many applications, including automobiles, biological inspection, surveillance, and mobile devices. An intuitive way to improve NIR sensitivity is to thicken the light absorption layer (silicon). However, thickened silicon lacks NIR sensitivity and has other disadvantages, such as diminished optical performance (e.g. crosstalk) and difficulty in processing. In this paper, a pixel structure for NIR sensing using a stacked CMOS image sensor is introduced. There are two photodetection layers, a conventional layer and a bottom photodiode, in the stacked CMOS image sensor. The bottom photodiode is used as the NIR absorption layer. Therefore, the suggested pixel structure does not change the thickness of the conventional photodiode. To verify the suggested pixel structure, sensitivity was simulated using an optical simulator. As a result, the sensitivity was improved by a maximum of 130% and 160% at wavelengths of 850 nm and 940 nm, respectively, with a pixel size of 1.2 ㎛. Therefore, the proposed pixel structure is useful for NIR sensing without thickening the silicon.

• 한국태양에너지학회 논문집
• /
• 제22권4호
• /
• pp.44-50
• /
• 2002

Photosynthesis of plants is effective in the range of 550 to 700 nm of the wavelength of solar irradiation. If the conversion of ultraviolet to the above mentioned region is possible, the photosynthesizing ability is expected to be enhanced. $Eu^{3+}$ doped soda-lime bulk and $TiO_2-SiO_2$ sol-gel coated glasses were prepared and their spectroscopic properties were studied. The absorption and emission spectra for the specimens were measured with the changes of wavelength and Eu ion concentration in the range of the wavelength of 300 to 700nm. The transmittance intensity of visible light through the bulk glass and the coated one was unchanged with the addition of Eu element. The emission spectrum intensity of $Eu^{3+}$ was found to be the maximum at 618 nm which is a transition of $^5DO{\rightarrow}^7F_2$. Additionally, it was shown that the intensity was linearly increased up to 10% of the Eu concentration.