• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.447-449
• /
• 2003

Remotely sensed data can be used to estimate biomass production using methodologies relating vegetation indices to light absorption or to leaf photosynthetic capacity. The considerations of both light absorption and photosynthetic capacity in remote sensing-based modeling to estimate biomass production or NPP was introduced based upon Monteith model NPP is one of a evaluation of land degradation. NPP was estimated from annual maximum NDVI by MODIS data. It was known that NPP of the grassland that except the forest and the farming ground was distributed between 50-200g /m2.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.428-429
• /
• 2005

Novel fluoroionophore of dibenzothiazolyl-dibenzo-crown ethers were synthesized from diformal-dibenzo 18-crown-6 (24-crown-8) with 2-aminothiophenol, and they were characterizated by $^1H$-NMR, $^{13}C$-NMR, IR spectrum, Mass spectrum, elemental analyses, respectively. The fluorescent properties of the newly synthesized crown ether were examined with $Li^+$, $Na^+$, $K^+$, $Rb^+$, $Cs^+$, $NH_4^+$ and $CF_3COOH$, respectively. With protonation using $CF_3COOH$, the absorption bands of the new crown ethers are further blue shifted, the maximum emission wavelengths further red shifted.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.12 no.1
• /
• pp.7-12
• /
• 1976

The optical properties of the sea water were studied by use of underwater photometers in the coastal waters of Busan, from December 1975 to May 1976. The absorption coefficient of the sea water in the area ranged from 0.223 to 0.901 and the mean was 0.355. Maximum valae of monthly mean was 0.454 in December, while the minium was 0.301 in January. The transparency in winter was higher than that in spring and the mean was 4. 7 meters. The relation between absorption coefficient (m) and transparency (D) was m= 1. 67/ D. The rate of light penetration at 5 m-layer in the area ranged from 1. 73 to 24.09 percent and the mean was 13.63 percent, while the rate at 10 m-layer ranged from 0.067 to 8.05 percent and the mean was 2.95 percent.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.7
• /
• pp.607-612
• /
• 1996

A series of new NLO-active poly(4-nitrophenylallylamine) derivatives was synthesized by the nucleophilic substitution reaction of several substituted 4-nitrohalobenzenes and poly(allylamine hydrochloride). All polymers obtained were amorphous and their glass transition temperatures (Tg) were observed around 148-160 ℃. For each of these polymers, their specific Tg values were dependent on characteristic electronic structures. UV-visible absorption spectra showed maximum absorption intensity at 355-393 nm for π-π* transition of alkylaminonitrophenyl groups. The χ(2)value of poly(4-nitrophenylallylamine), as determined by the second harmonic generation at 1064 nm, for a thin polymer film poled at an elevated temperature, was 1.4x10-8esu. The third-order NLO properties of poly(4-nitrophenylallylamine) derivatives were evaluated through measurement of degenerate four-wave mixing technique and χ(3) coefficient in the range of 2.7~3.2x10-12 esu at 602 nm was found with 400 fs laser pulses.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.443-447
• /
• 2018

We propose a diode-pumped cesium laser using frequency locking of a pump laser that can effectively increase the maximum output power of the cesium laser. We simultaneously monitored the absorption spectrum of cesium and the laser output power, and the frequency of pump laser was locked at the center of the $D_2$ absorption line of the cesium atom to obtain an effective gain enhancement. Using this scheme, we have achieved output power increase of ~0.1 W compared to when frequency locking was not applied. Furthermore, by optimizing the temperature of the cesium cell and the reflectivity of the output coupler, we successfully achieved an output power of 1.4 W using the pump power of 2.9 W, providing a slope efficiency of 61.5% and optical-to-optical efficiency of 49%.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.171-175
• /
• 1988

The spectral properties of piroxicam in different solvents are similar to those of its skeletal precursor, HMBDC. The maximum absorption and emission wavelengths strongly depend on the hydrogen bonding ability of the solvent, and it is shown that intramolecular hydrogen bonding between the -OH and the ortho carbonyl group of the parent benzothiazine ring plays an important role in the solvent-dependence of their spectroscopic properties. The fluorescence spectra in aprotic nonpolar solvent exhibit abnormally large Stokes-shifted (${\sim}9,000cm^{-1}$) emission bands in contrast to the spectra in water. In ethanol, dual emission bands with two different fractional components of lifetimes have been observed. These results suggest that the abnormally red-shifted emission is attributed to the proton transferred form of an intramolecularly hydrogen-bonded closed conformer.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.169-181
• /
• 2021

Five dyes based on phthalocyanine, a dye on azo, and a dye on anhraquinone were prepared from corresponding starting material to investigate the effects of substituent on thermal-stability of dyes which is essentially required to apply to the color filters. Synthesized dyes were confirmed their chemical structure using by 1H-NMR, MASS and Elemental analysis. The thermal-stability was evaluated by the weight reductions measured by TGA analysis comparing to that of conventional C.I. Pigment Blue 15:6. The absorption maxima were measured by UV-VIS spectrophotometer then the effects of substituent on absorption maximum was also investigated.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.200-206
• /
• 2023

Near-infrared (NIR) sensing technology using CMOS image sensors is used in many applications, including automobiles, biological inspection, surveillance, and mobile devices. An intuitive way to improve NIR sensitivity is to thicken the light absorption layer (silicon). However, thickened silicon lacks NIR sensitivity and has other disadvantages, such as diminished optical performance (e.g. crosstalk) and difficulty in processing. In this paper, a pixel structure for NIR sensing using a stacked CMOS image sensor is introduced. There are two photodetection layers, a conventional layer and a bottom photodiode, in the stacked CMOS image sensor. The bottom photodiode is used as the NIR absorption layer. Therefore, the suggested pixel structure does not change the thickness of the conventional photodiode. To verify the suggested pixel structure, sensitivity was simulated using an optical simulator. As a result, the sensitivity was improved by a maximum of 130% and 160% at wavelengths of 850 nm and 940 nm, respectively, with a pixel size of 1.2 ㎛. Therefore, the proposed pixel structure is useful for NIR sensing without thickening the silicon.

• ETRI Journal
• /
• v.46 no.3
• /
• pp.413-420
• /
• 2024

A dual-band bio-implantable compact antenna with a meander-line structure is presented. The proposed meander-line antenna resonates at the industrial, scientific, and medical (2.4 GHz) and wireless medical telemetry (1.4 GHz) bands. The meander-line structure is selected as a radiating patch given its versatile and effective design. With a dimension of only 10 mm × 10 mm × 0.635 mm, the designed antenna is compact. Considering a skin phantom, the proposed antenna was designed, optimized, and simulated. The Rogers RT/duroid 6010 substrate material with high dielectric constant was used to fabricate the meander-line dual-band implantable antenna, which was validated experimentally. The superstrate was made of the same material. Experiments were conducted on skin-mimicking gel. The designed meander-line antenna has a high peak gain of -21 dBi at 2.4 GHz, and its maximum specific absorption rate is compliant with IEEE safety standards.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.196-202
• /
• 2005

This research was conducted to determine the amount of water absorbed by a polyacrylamide hydrogel such as Stocksorb C (STSB), effect of salts on inhibition in hydration of STSB, and the hydrogel effects on changes of nutrient concentration in external solution. Absorption of deionized water by STSB reached a maximum of 180 $mL{\cdot}g^{-1}$. Monovalent soluble salts such as $KH_2PO_4,\;KNO_3$, and $(NH_4)_2SO_4$ reduced absorption of the hydrogel, but the degrees of inhibition in absorption were similar in three kinds of salts. Twenty milliequivalents per liter of $Ca_{2+}\;or\;Mg_{2+}$ reduced water absorption of STSB to $14\%$ compared to those of deionized water. Solution absorption was consistently lower in the presence of divalent cations than in the presence of the monovalent cations. But the absorption was unaffected by the uncharged salt such as urea in all concentrations tested. The final $K^+\;and\;NH_4^+-N$ concentrations of the solution remaining after absorption by STSB was higher than those of the initial solution. The soaking of STSB to full strength of Hoagland solution resulted in increase of $NO_3^--N,\;H_2PO_4^-\;and\;SO_4^{2-}$ concentrations in external solution compared to initial solution, reaching 5,300, 250 and 1,500 $mL{\cdot}g^{-1}$, respectively, at 24 hrs after soaking.