• 한국경영과학회지
• /
• 제17권1호
• /
• pp.31-41
• /
• 1992

An extension of generalized linear multiple choice knapsack problem [1] is presented and an algorithm of order 0([n .n$_{max}$]$_{2}$) is developed by exploiting its extended properties, where n and n$_{max}$ denote the total number of variables and the cardinality of the largest multiple choice set, respectively. A numerical example is presented and computational aspects are discussed.sed.

• Nonlinear Functional Analysis and Applications
• /
• 제27권4호
• /
• pp.797-805
• /
• 2022

Let P(z) be a polynomial of degree n. A well-known inequality due to S. Bernstein states that if P ∈ P_n, then $$\max_{{\mid}z{\mid}=1}\,{\mid}P^{\prime}(z){\mid}\,{\leq}n\,\max_{{\mid}z{\mid}=1}\,{\mid}P(z){\mid}$$. In this paper, we establish some extensions and refinements of the above inequality to polar derivative and some other well-known inequalities concerning the polynomials and their ordinary derivatives.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1097-1102
• /
• 2003

In this paper, we used only PR as etching mask, while it used usually Cr/AU as etching mask, and in order to fabricate a photosensor has the increased sensitivity, we investigated on the sensitivity of general type and p-i-n type diode. we designed microchannel size width max 10um, min 5um depth max 10um, reservoir size max 100um, min 2mm. Fabrication of microfluidic devices in glass substrate by glass wet etching methods and glass to glass fusion bonding. The p-i-n diode has higher sensitivity than photodiode, Considering these results, we fabricated p-i-n diodes on the high resistive(4㏀$.$cm) wafer into rectangle and finger pattern and compared internal resistance of each pattern. The internal resistance of pin diode can be decreased by the application of finger pattern has parallel resistance structure from 571Ω to 393Ω.

• Journal of electromagnetic engineering and science
• /
• 제13권2호
• /
• pp.127-133
• /
• 2013

We examined the scaling effects of a number of gate_fingers (N) and gate_widths (w) on the high-frequency characteristics of $0.1-{\mu}m$ metamorphic high-electron-mobility transistors. Functional relationships of the extracted small-signal parameters with total gate widths ($w_t$) of different N were proposed. The cut-off frequency ($f_T$) showed an almost independent relationship with $w_t$; however, the maximum frequency of oscillation ($f_{max}$) exhibited a strong functional relationship of gate-resistance ($R_g$) influenced by both N and $w_t$. A greater $w_t$ produced a higher $f_{max}$; but, to maximize $f_{max}$ at a given $w_t$, to increase N was more efficient than to increase the single gate_width.

• Korean Chemical Engineering Research
• /
• 제61권1호
• /
• pp.123-141
• /
• 2023

인공신경망을 이용한 모델 개발에서 데이터의 품질은 모델 성능에 큰 영향을 주고, 양질의 충분한 데이터가 인공신경망 훈련을 위해 필요하다. 하지만, 공학 분야에서는 적은 양의 데이터로 모델을 개발해야 하는 경우가 자주 발생한다. 본 논문은 토양에 살포된 축산 분뇨로부터 암모니아 방출량에 대한 적은 수의 데이터(83 개)를 사용하여 인공신경망 모델의 예측 성능을 향상할 수 있는 방안을 제시하였다. Michaelis-Menten 식으로 표현되는 암모니아 방출량 문제는 11개 입력변수에 대하여 2개 출력변수로 구성되었다. 출력변수는 최대 질소 발생량(N_max, kg/ha)과 N_max의 절반에 도달하는 시간(K_m, h) 이다. 범주형 입력변수에 대해 다차원 등간격 기법인 one-hot encoding 을 이용하여 데이터 전처리를 수행하였고, 훈련데이터 66개에 대하여 generative adversarial network (GAN)을 이용하여 13개 데이터를 추가로 보강하였다. 또한, 인공신경망의 초매개변수인 은닉층 수, 각 은닉층 내 뉴런 수, 활성화 함수의 최적 조합을 찾기 위하여 Gaussian process (GP)를 사용하였다. 기존의 인공신경망 구조(Lim et al., 2007) 는 17개 평가데이터에 대하여 mean absolute error (MAE)는 K_m에서 0.0668, N_max에서 0.1860이었다. 본 연구에서 제시된 인공신경망 모델은 K_m에서 0.0414, N_max에서 0.0818로 MAE 가 기존 모델 대비 각각 38%, 56% 감소하였다. 본 연구에서 제시된 방법은 적은 양의 데이터를 갖는 문제에서 인공신경망 성능을 향상하기 위하여 활용할 수 있을 것이다.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3702-3707
• /
• 2009

본 논문은 Gray 부호화된 QAM (Quadrature Amplitude Modulation) 신호를 I 축 상에서 M개의 심벌을 갖는 M-PAM (Pulse Amplitude Modulation)과 Q 축 상에서 N개의 심벌을 갖는 N-PAM으로 분리한다. 수신된 심벌 신호를 비트 연판정 값으로 변환하기 위하여 Euclidean 거리를 이용한 근사화된 MAP (Maximum a Posteriori) 알고리듬을 제시한다. 기존의 Max-Log-MAP 방식은 일반 MAP 방식에서 사용하는 지수함수 혹은 로그함수 대신 심벌간 거리 비교를 통하여 구현 복잡도를 낮추었다. 그러나 심벌의 수가 증가 할수록 비교대상이 많아지므로 구현 복잡도가 증가하게 된다. 제안된 알고리듬은 사칙 연산에 의해 계산이 되기 때문에 직관적으로 구현복잡도가 낮아짐을 알 수 있다.

• 대한치과교정학회지
• /
• 제21권1호
• /
• pp.223-238
• /
• 1991

This study was carried out in order to findout the amount of tooth movement, the changes arch size and the changes in arch morphology following orthodontic treatment and to provide a guideline for to predict post-treatment arch morphology. The sample group for this study consists of 15 males and 22 females, totalling in 37 persons, who received orthodontic treatment at Orthodontic Department of Dankook Univ. Dental Hospital. They are classified into Extraction Class I treatment group (E I), Non-extraction Class I treatment group (N I), and Non-extraction Class III treatment group (N III), according to their pre-treatment malocclusion state and methods of treatment. Following conclusions and averaged dental arch form for each group were obtained by cephalometric linear measurements and dental arch measurements using pre- and post-treatment lateral cephalograms and plaster study models. 1. Intercanine width were reduced in max. of both EI and NI during the period of treatment, 2. Intermolar width were reduced in max. of EI and increased in max. of NI. Therefore although there was no difference between these two groups before the treatment, intermolar width of the max, of NI was wider than that of E1 after the treatment. 3. PMV-incisor distance and PMV-canine distance were decreased in both max. and mand. of EI and that of NI, during the period of treatment. PMV-molar distance was decreased in both max. and mand. of NI and in mand. of NIII. 4. Items that showed stability during the treatment were: max. & mand. PMV-molar distance, mand. intercanine and intermolar width in EI; mand. intercanine and intermolar width in NI; mand. & max. PMV-incisor distance, PMV-canine distance, max. PMV-molar distance and max. & mand. intercanine and intermolar width in NIII. 5. The differences in averaged canine and molar variances to post-treatment dental arch form were present only in EI and in NI. There was no variance between maxilla and mandible in each group.

• 한국환경과학회지
• /
• 제24권11호
• /
• pp.1393-1404
• /
• 2015

Ten empirical disinfection models for the plasma process were used to find an optimum model. The variation of model parameters in each model according to the operating conditions (first voltage, second voltage, air flow rate, pH, incubation water concentration) were investigated in order to explain the disinfection model. In this experiment, the DBD (dielectric barrier discharge) plasma reactor was used to inactivate Phytophthora capsici which cause wilt in tomato plantation. Optimum disinfection models were chosen among ten models by the application of statistical SSE (sum of squared error), RMSE (root mean sum of squared error), $r^2$ values on the experimental data using the GInaFiT software in Microsoft Excel. The optimum models were shown as Log-linear+Tail model, Double Weibull model and Biphasic model. Three models were applied to the experimental data according to the variation of the operating conditions. In Log-linear+Tail model, $Log_{10}(N_o)$, $Log_{10}(N_{res})$ and $k_{max}$ values were examined. In Double Weibull model, $Log_{10}(N_o)$, $Log_{10}(N_{res})$, ${\alpha}$, ${\delta}_1$, ${\delta}_2$, p values were calculated and examined. In Biphasic model, $Log_{10}(N_o)$, f, $k_{max1}$ and $k_{max2}$ values were used. The appropriate model parameters for the calculation of optimum operating conditions were $k_{max}$, ${\alpha}$, $k_{max1}$ at each model, respectively.

• 한국전자파학회논문지
• /
• 제22권2호
• /
• pp.162-172
• /
• 2011

본 논문에서는 WiMAX 주파수 대역(2.3~2.7 GHz)에서 동작하는 4 W급 소형 전력증폭기 모듈을 설계, 제작하였다. 본 연구에 사용된 능동소자는 최근 발표된 Triquint사의 GaN HEMT 소자(Bare-chip)이다. 본 논문에서는 전력증폭기를 설계하기 위하여, 먼저 자체 제작한 조정용 지그(jig)를 사용하여 상용 칩의 최적 임피던스를 실험을 통해 추출하였으며, 추출한 임피던스를 적용한 EM-simulation으로 F급 설계를 행하였다. 소형의 패키지(모듈)에 집적하고 정합하기 위하여 인덕터와 커패시터는 각각 spiral inductor, interdigital capacitor로 구현하였다. 소형으로($4.4{\times}4.4\;mm^2$) 패키지된 전력증폭기 모듈의 경우, 출력은 36 dBm, 효율은 50 % 그리고 2차 및 3차 고조파에 대한 고조파 억제는 40 dBc 이상의 특성을 보였다.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.968-979
• /
• 2019

Recently, there has been increased interest in the study of multiphase machines due to their higher fault-tolerant capability when compared to their conventional three-phase counterparts. For six-phase machines, stator windings configured with a single isolated neutral (1N) provide significantly more post-fault torque/power than two isolated neutrals (2N). Hence, this configuration is preferred in applications where post-fault performance is critical. It is well known that min-max injection has been commonly used for three-phase and multiphase machines in healthy condition to maximize the modulation limit. However, there is a lack of discussion on min-max injection for post-fault condition. Furthermore, the effects in terms of the common-mode voltage (CMV) in modulating signals has not been discussed. This paper investigates the effect of min-max injection in post fault-tolerant control on the voltage and speed limit of a symmetrical six-phase induction machine with single isolated neutral. It is shown that the min-max injection can minimize the amplitude of reference voltage, which maximizes the modulation index and post-fault speed of the machine. This in turn results in a higher post-fault power.