• 대한임베디드공학회논문지
• /
• 제12권6호
• /
• pp.377-384
• /
• 2017

The scope of the matrix application is so broad that it can not be limited. A typical matrix application area in computer science is image processing. Particularly, radar scanning equipment implemented on a small embedded system requires real-time matrix transposition for image processing, and since its memory size is small, a general matrix transposition algorithm can not be applied. In this case, matrix transposition must be done in disk space, such as flash disk, using a limited memory buffer. In this paper, we analyze and improve a recently published flash disk-based matrix transposition algorithm named as asymmetric sub-matrix transposition algorithm. The performance analysis shows that the asymmetric sub-matrix transposition algorithm has lower performance than the conventional sub-matrix transposition algorithm, but the improved asymmetric sub-matrix transposition algorithm is superior to the sub-matrix transposition algorithm in 13 of the 16 experimental data.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권1호
• /
• pp.77-84
• /
• 2011

연속보를 대상으로 한 재료비선형 전달행렬법을 제시하였으며, Gauss-Lobatto 적분법을 사용하여 보의 강성행렬로부터 전달행렬을 도출한다. 전달행렬법에서는 유한요소해석법과는 달리 각 절점의 자유도 수에 상관없이 일정한 미지값만을 가지게 되므로 선형해석뿐만 아니라 비선형해석에서도 빠른 연산속도를 보인다. 연속보에 대한 비선형 해석의 적용 예를 통한 비교 결과, 재료비선형 전달행렬법이 변위-모멘트, 변위-하중, 곡률-모멘트의 관계에서 유한요소해석법에 비해 효율적인 것으로 평가되었다.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.317-326
• /
• 1997

An investigation was performed to study the matrix cracking and delamination in laminated composite plates due to transverse impact. A model was developed for predicting the initiation of the matrix cracking and the shape and size of impact-induced delamination in laminated composite plates resulting from the ballistic impact. The model consists of a stress analysis and a failure analysis. A transient finite element analysis which was based on the higher-order shear deformation theory was adopted for calculating the stresses inside the laminated composite plates during impact. A failure analysis was used to predict the initial intraply matrix cracking and the shape and size of the interface delamination in the laminates. As a results, a shear matrix cracking which was governed by the transverse interlaminar shear stress occured at the middle layer near the midplane of laminates and a bending matrix cracking which was governed by the transverse inplane stress occured at the bottom layer near the surface of laminates. In a thick laminates, a shear matrix cracking generated first at the middle layer of laminates, but in a thin laminates, a bending matrix cracking generated first at the bottom layer of laminates.

• 전산구조공학
• /
• 제10권1호
• /
• pp.193-200
• /
• 1997

탄성지반상의 원형탱크해석에는 여러방법이 있지만 최근에 널리 사용되는 방법은 유한요소법이다. 그러나 이 방법은 탄성지반상의 탱크해석시 많은 절점수가 필요하게 된다. 이것은 곧 많은 계산기 기억용량 및 계산시간 뿐만 아니라 노력이 필요하게 된다. 본 연구에서는 유사탄성지반보(Analogy of Beam on Elastic Foundation) 및 지반강성행렬(Foundation Stiffness Matrix)을 이용하여 축대칭하중을 받는 축대칭탱크를 뼈대 구조화 할 수 있었다. 또한 이 뼈대 구조를 유한요소로 분할하고, 각 요소 강성행렬(Stiffness Matrix)을 전달행렬(Transfer Matrix)로 전환하여 전달행렬법으로 원형탱크를 해석 할 수 있었다. 유한요소법과 전달행렬법을 탄성지반상의 원형탱크 해석에 적용한 결과 두 해석결과의 차이는 없고, 전달행렬법을 적용한 경우 최종 연립방정식수가 4개로 간략화 되었다.

• 대한수학회보
• /
• 제59권5호
• /
• pp.1215-1235
• /
• 2022

In this paper we study Szegö kernel projections for Hardy spaces in quaternionic Clifford analysis. At first we introduce the matrix Szegö projection operator for the Hardy space of quaternionic Hermitean monogenic functions by the characterization of the matrix Hilbert transform in the quaternionic Clifford analysis. Then we establish the Kerzman-Stein formula which closely connects the matrix Szegö projection operator with the Hardy projection operator onto the Hardy space, and we get the matrix Szegö projection operator in terms of the Hardy projection operator and its adjoint. At last, we construct the explicit matrix Szegö kernel function for the Hardy space on the sphere as an example, and get the solution to a Diriclet boundary value problem for matrix functions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.528-533
• /
• 1995

An analyical method is proposed to construct a clamp jointed structure as an equivalent stiffness matrix element in the finite element modal analysis of a complex beam structure. Static structural analysis was first made for the detail finite element model of the clamp joint. Utilizing the results of this analysis, the equivalent stiffness matrix element was buildup by using the flexibility influence coefficient method and Guyan condensation. The proposed method was applied to finite element modal analysis of a clamp jointed cantilever beam. And the finite element analysis results were compared to those experimental modal analysis. Comparison shows doog agreement each other Furthermore the effects of normal contact(or clamping) load on the equivalent stiffness matrix was also examined. The equivalent stiffness matrix showed little change in spite of the remakable increase in the contact load on the clamp joint.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.288-296
• /
• 1997

Curved beam elements with two nodes based on shallow beam geometry and strain interpolations are employed in eigenvalue analysis. In these elements, the displacement interpolation functions and mass matrices are consistent with strain fields. To assess the quality of the element mass matrix in free vibration problems, several numerical experiments are performed. In these analysis, both the inconsistent mass matrices using linear displacement interpolation function and the consistent mass matrices are used to show the difference. The numerical results demonstrate that the accuracy is closely related to the property of the mass matrix as well as that of the stiffness matrix and that the mass matrix consistent with strain fields is very beneficial to eigenvalue analysis. Also, it is proved that the strain based elements are very efficient in a wide range of element aspect ratios and curvature properties.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1163-1167
• /
• 2003

Effective properties of ceramic matrix plain woven textile composites were calculated using finite element analysis. The considered geometry is a unit cell of plain weave and the analysis was performed by commercial finite element program, ANSYS. The materials for analysis are 3 types for matrix, 1 type for fiber with various volume fraction. The result indicates that the effective properties of ceramic matrix composites can be controlled by the volume fraction. The result can be used for numerical analysis using ceramic matrix composites.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권3호
• /
• pp.313-321
• /
• 2012

Vibration analysis of a thin-walled structure can be performed with a consistent mass matrix determined by the shape functions of all degrees of freedom (d.o.f.) used for construction of conventional stiffness matrix, or with a lumped mass matrix. In similar way stability of a structure can be analysed with consistent geometric stiffness matrix or geometric stiffness matrix with lumped buckling load, related only to the rotational d.o.f. Recently, the simplified mass matrix is constructed employing shape functions of in-plane displacements for plate deflection. In this paper the same approach is used for construction of simplified geometric stiffness matrix. Beam element, and triangular and rectangular plate element are considered. Application of the new geometric stiffness is illustrated in the case of simply supported beam and square plate. The same problems are solved with consistent and lumped geometric stiffness matrix, and the obtained results are compared with the analytical solution. Also, a combination of simplified and lumped geometric stiffness matrix is analysed in order to increase accuracy of stability analysis.

• 융합경영연구
• /
• 제7권1호
• /
• pp.39-50
• /
• 2019

Purpose - The article views the theoretical basis of adaptation concentric matrix models in the analysis of the financial condition of the organization. Presented the elements counting procedures in the assessment of economic stability. Research design, data, and Methodology - Used the economic indicates in the concentric matrix models. The article views the specific using the concentric matrix models in the analysis of the financial condition of the organization. Results - The concentric matrix models can be adaptation to the analysis of financial conditions of organizations and to the comparative analysis. In the process of analysis of economic stability can be used "a field of efficiency". The classical variant of methods is transformed. The detailed assessment of influence of individual factors defined the additional methods. Conclusions - In the article the methods are demonstrated on the material of organization (Hyundai Elevator Co, China Communications Construction Company).