• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.9-14
• /
• 1984

This study was performed to obtain the effective selection informations for improvement of quality and increase of yield in red pepper. The eight parents and twenty eight crosses from partial diallel were used as materials for estimation of correlations among the pericarp characters, viz, fruit length, fruit width, pericarp thickness (fresh and dry) and pericarp weight (fresh and dry), between pericarp weight and seed weight and between pericarp weight and the percent of seed weight/pericarp weight and path coefficients on fresh and dry pericarp weight. Results were as follows. In $F_1s$, fresh and dry pericarp weight had positive correlations with fruit length, fruit width, and pericarp thickness. Fresh pericarp weight was also positively correlated with dry pericarp weight. Dry pericarp thickness had a negative correlation with fruit length but had positive correlations with fruit width and fresh pericarp thickness. Fresh pericarp thickness had a positive correlation with fruit width. Significantly positive correlations between $F_1s$ and mid-parents were observed in pericarp characters. Pericarp weight had a positive correlation with seed weight but had a negative correlation with the percent of seed weight/pericarp weight. In path coefficient analysis, it was found that fruit length, fruit width and pericarp thickness had direct effects on fresh and dry pericarp weight and that fruit length had the largest direct effect in $F_1s$.

• Asian Journal of Business Environment
• /
• v.2 no.1
• /
• pp.25-34
• /
• 2012

It is possible to use pallet for forwarding as chinese cabbages and radishes are general large-scale trading items at the agricultural wholesale market though, however, most of these are forwarded as it have packed in net bags or in P·E bags. Thus, it is still hard for palletizing. The type of packing the product in the net bag makes it difficult for palletizing. It is not a stable shape enough and easily collapsed for pallet loading. Because of this collapsibility, the corrugated cardboard box is being used to enhance forwarding efficiency, but the existing corrugated cardboard box could be crushed easily by moist what is from the agricultural product's property and it also could be squashed by the mass of the loaded box layers on itself. In contrary, the functional waterproof corrugated cardboard box is not collapsed through palletizing and it is efficient for product management with it's ventilation function in respond to pre-cooling effect. Furthermore, because it has various functional shapes as the open type, the partition type and so on, it is effective for maintaining freshness of the product and standardizing the distribution of agricultural product. It is well-known that it is possible to introduce this box to cargo-works of agricultural product. Consequently, the recognition of main distributors about the pallet distribution of the chinese cabbage and the radish was apprehended in this study for activating mechanization of loading and unloading. The survey was conducted to the main distributors such as the forwarder, the auction dealer and the commission merchant with Garak-dong wholesale market as the center. The appropriate packing materials and problems of the existing method for loading and unloading were derived through the survey. Especially, it was focused on analyzing the difference of recognition between the subject groups for the way of using waterproof cardboard corrugated box to deal with the difficult product for packing in normal corrugated box because of the box's absorption of moist from the agricultural product like a chinese cabbage and a radish. Total In the cases of the forwarders and the commission merchants, the net was highly responded as 45%, 74% from each groups for the best packing material for mechanization of distribution and the waterproof corrugated cardboard box was responded as 20%, 22% from each groups as much preferable than multi-stage wooden box. However, for the radish, the waterproof corrugated cardboard box was the best material as 56%, and the auction trader group supported it for 80%. So, the using the waterproof corrugated cardboard box for mechanization of distribution was negative for the chinese cabbage, but it was positive for the radish. The average was 2.42, the standard deviation was 1.24. The negative response(about 55%) was prevailing more than positive response(about 23%). It could be analyzed that even there was the positive recognition for using the waterproof corrugated cardboard box for the radish though the preference for low price of net bag in the chinese cabbage forwarding procedure. Still now, it seems that is a burden for using the waterproof corrugated cardboard box with high price. In the analysis on the recognition differences about using the waterproof corrugated cardboard box for the chinese cabbages and the radish between the forwarders and the commission merchants, generally the negative recognition was prevailing, but the forwarders(2.696) were more positive for using the waterproof corrugated cardboard box than the commission merchants(2.145).

• Annals of Clinical Microbiology
• /
• v.21 no.4
• /
• pp.80-85
• /
• 2018

Background: The aim of this study was to comparatively evaluate the bactericidal effects of copper, brass (copper 78%, tin 22%), and stainless steel against methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant Enterococcus faecium (VREFM), and multidrug-resistant Pseudomonas aeruginosa (MRPA). Methods: The isolates (MRSA, VREFM, MRPA) used in this study were mixed wild type 3 strains isolated from patients treated at Uijeongbu St. Mary's Hospital in 2017. These strains showed patterns of multidrug resistance. The lyophilized strains were inoculated into and incubated for 24 hr in tryptic soy broth at $35^{\circ}C$. The initial bacterial inoculum concentration was adjusted to $10^5CFU/mL$. A 100-mL bacterial suspension was incubated in containers made of brass (copper 78%, tin 22%), copper (above 99% purity), and stainless steel at $35^{\circ}C$. Viable counts of bacteria strains were measured for 9 days. Results: In this study, the bactericidal effects of copper and brass on MRSA, VREFM, and MRPA were verified. The bactericidal effect of stainless steel was much weaker than those of copper and brass. The bactericidal effect was stronger on MRPA than on MRSA or VREFM. Conclusion: To prevent cross infection of multidrug resistant bacteria in hospitals, further studies of longer duration are needed for testing of copper materials on objects such as door knobs, faucets, and bed rails.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.128-136
• /
• 2009

To obtain pure lines for breeding $F_1$ varieties of spreading surfinia and wave petunia, Petunia ${\times}$ hybrida, 20 lines of surfinia petunia and 28 lines of wave petunia that were considered uniform in growth and flowering characteristics were selected by self-pollination of the fifth($S_5$) or the seventh generation($S_7$). The 20 selected lines of surfinia petunia had the branch number ranged from 6.0 to 11.0 cm, and the internode length ranged from 2.0 to 4.2 cm. Among them, ten lines, including '$Pe99-017^7$' were above 60 cm of plant width, above 300 leaves in a plant. Fourteen lines including '$Pe99-017^7$' were more than 150 in the number of flower. In the petal color, thirteen lines, including '$Pe99-017^7$', were red-purple; three, including '$Pe99-007^7$', were purple; '$Pe04-086^7$' and '$Pe04-159^7$' were violet; and line '$Pe072-1^7$' was white. Eight lines including '$Pe02-205-2^5$' ranged from 4.0 to 5.0 cm of flowers diameter, and seven lines including '$Pe04-086^5$' ranged from 3.0 to 4.0 cm of leaf length, which is relatively low. Germination rate of the lines was more than 50%. In the wave petunia, the branch number of the 28 selected lines ranged from 8.0 to 13.0 cm, and the internode length ranged from 1.0 to 3.2 cm, which is relatively higher than surfinia petunias. Among them, ten lines, including '$Pe99-020^7$' were above 60 cm of plant width, above 200 leaves in a plant. Twelve lines including '$Pe04-034-2^5$' were more than 150 in the number of flower. In the petal color, eighteen lines, including '$Pe99-020^7$', were red-purple; three, including '$Pe04-113-4^5$', were red; three, including '$Pe04-263^5$', were white; '$Pe04-201^5$' and '$Pe04-263^5$' were violet blue; and line '$Pe04-072-5^5$' was purple. Nine lines including '$Pe04-201^5$' ranged from 4.0 to 5.0 cm of flowers diameter, and eleven lines including '$Pe04-263^5$' ranged from 3.0 to 4.0 cm of leaf length, which is relatively low. All the lines with various growth and flowering characteristics would be very promising to use as breeding materials for $F_1$ hybrids of spreading petunia, Petunia ${\times}$ hybrida.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.219-228
• /
• 2009

The construction procedures and artificial turf maintenance program on golf course definitely influence on the distortion of its environment. Soil microbial communities in soil profile were affected directly by those practises on turf areas. In Jeju island, the environmental impact assessment has been required to apply the first quality class granular activated carbon(GAC), which has a high absorbent character to agricultural chemicals, on the soil profiles of golf green system to reduce the pesticide leaching to ground water. This research was carried out to analyze the changes of microbial communities and chemical properties on soil profiles where GAC had been applied at the construction stage at two golf courses in Jeju. The changes of soil microbial population and chemical properties associated with construction methods of soil profile and agrochemical management program were analyzed by monthly at the surface and sub-soil profiles during April through October, 2007. The total numbers of bacteria and fungi, soil moisture content, soil physio-chemical properties were measured on greens and fairways of the both golf courses with different GAC treatment on the green and fairway soil profiles. The results showed that GAC had positive effects on the water holding capacity, pH and EC, however, it did not improved the holding capacity of available nutrients ${NO_3}^-,{NH_4}^+$, and phosphorus by its sorption phenomenon. In microbial count test, the total numbers of bacteria and fungi showed a great variation during sampling dates. That may directly relate to the agrochemical application, however, the ratio of total bacterial number versus total fungus number showed a constant value on a sub-soil of 15~30cm depth. Thus, the construction method of GAC in soil profile, and application of fertilizer and pesticide, both impacted on the changes of microbial population. It's means that the construction method of soil profile and turf management using agro-materials might greatly affect on the turfgrass culture and the environment of golf course.

• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.1002-1008
• /
• 2011

This study aimed to examine the effect of the Schizandra chinensis fruit and Morus alba leaf on insulin expression in HIT-T15 cells, which is exposed by glucose. The total polyphenol contents of the S. chinensis fruit ethanol extract and the M. alba leaf hot-water extract were $20.11{\pm}0.35$ mg/g and $50.02{\pm}0.62$ mg/mL, respectively. The S. chinensis fruit ethanol extract and the M. alba leaf hot-water extract contained $2.85{\pm}0.15$ and $8.76{\pm}0.43$ mg/g flavonoids, respectively. The antioxidant ability of the M. alba leaf hot-water extract was found to be superior to that of the S. chinensis fruit ethanol extract. Compared to the HIT-T15-treated 10 mM 2-deoxy-D-glucose, the $100{\mu}g/mL$ S. chinensis ethanol extract was found to have a two fold increase in insulin productivity. Moreover, the $100{\mu}g/mL$ M. alba leaf hot-water extract promoted the insulin secretion of high-glucose-damaged HIT-T15 almost ten fold. The above results showed that the S. chinensis fruit ethanol extract and M. alba leaf hot-water extract may improve the insulin productivity of the beta cell with glucose-induced oxidative damage. These data suggest that the S. chinensis fruit ethanol extract and the M. alba leaf hot-water extract can be used as food materials for the regulation of insulin secretion.

• Journal of Food Hygiene and Safety
• /
• v.36 no.5
• /
• pp.430-439
• /
• 2021

Essential oils with excellent antibacterial activity were used to study the inhibitory effect against the six types of food poisoning biofilms formed on the surfaces of polyethylene (PE) and stainless steel (SS) that are widely used for food processing instruments and containers. The antibacterial activity of 20 kinds of essential oils was tested using the disk diffusion method. The result showed the degree of antibacterial activity in the following order: cinnamon> clove> lemongrass> peppermint> pine needle (highest to lowest). The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of cinnamon and clove oil were in the range of 0.63-1.25 mg/mL and 1.25-2.50 mg/mL, respectively. The MIC and MBC of lemongrass oil were 1.25-2.50 mg/mL and 2.50-5.00 mg/mL, respectively, showing slightly less antibacterial activity. Although the preventive effect of three types of essential oils on the biofilm formation differed slightly depending on food poisoning bacteria, PE, and SS, it was found that the precoating of 0.5% cinnamon, clove, and lemongrass oil on the PE and SS affects the formation of biofilm. Increased essential oil concentration significantly inhibited the biofilm formation for all food poisoning bacteria (P<0.05), and biofilms of Listeria monocytogenes and Staphylococcus aureus were not formed when treated with 0.5% cinnamon and clove oil. The elimination effect of food poisoning bacteria biofilms formed on the surfaces of PE and SS differed depending on the type of food poisoning bacteria. Still, the biofilm elimination effect increased as the essential oil concentration increased, and the biofilm elimination rate of clove oil was generally high. Therefore, this study found that the cinnamon and clove essential oils (0.5%) are suitable natural materials that effectively prevent, inhibit, and remove the biofilms formed by the food poisoning bacteria on the surfaces of polyethylene and stainless steel.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.3
• /
• pp.130-137
• /
• 2021

Purpose: The various suture techniques can be utilized in order to maximize the keratinized tissue healing around dental implants. The aim of this study is to compare the soft tissue healing pattern between two different suture techniques after implant placement. Materials and Methods: 15 patients with 18 implants were enrolled in this study. Simple implant placement without any additional bone graft was performed. Two different suture techniques were used to tug in the mobilized flap near the healing abutment after paramarginal flap design. Digital intraoral scan was performed at baseline, post-operation, stitch out, and 3 months after operation. The scan data were aligned using multiple points such as cusp, fossa of adjacent teeth, and/or healing abutment. After subtracting scan data at baseline with other time-point results, closed space indicating volume increment of peri-implant mucosa was selected. The volume of the close space was measured in mm³. The volume between two suture techniques at three time-points was compared using nonparametric rank-based analysis. Results: Healing was uneventful in both groups. Both suture technique groups showed increased soft tissue volume immediately after surgery. The amount of volume increment significantly decreased after 3 months (P < 0.001). Flap folding suture group showed higher median of volume increment than interrupted suture group after 3 months without any statistical significance (P > 0.05). Conclusion: After paramarginal flap reflection, the raised flaps stabilized by flap folding suture showed relatively higher volume maintenance after 3-month healing period. However, further studies are warranted.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.965-973
• /
• 2021

Since radiation therapy is irradiated with high-energy X-rays in a variety of at least 20 Gy to 80 Gy, a high dose is administered to the local area where the tumor is located, and various side effects of some normal tissues are expected. Currently, in clinical practice, lead, a representative material, is used as an effort to shield normal tissues, but lead is classified as a heavy metal harmful to the human body, and a large amount of skin contact can cause poisoning. Therefore, this study intends to manufacture a measurement sheet that can compensate for the limitations of lead using the materials Tungsten, Brass, and Copper of the 3D printer of the FDM (Fused Deposition Modeling) method and to investigate the penetration performance. Tungsten mixed filament transmission measurement sheet size was 70 × 70 mm and thickness 1, 2, 4 mm using a 3D printer, and a linear accelerator (TrueBeam STx, S/N: 1187) was measured by irradiating 100 MU at SSD 100 cm and 5 cm in water using a water phantom, an ion chamber (FC-65G), and an elcetrometer (PTW UNIDOSE), and the permeability was evaluated. As a result of increasing the measurement sheet of each material by 1 mm, in the case of Tungsten sheet at 3.8 to 3.9 cm in 6 MV, the thickness of the lead shielding body was thinner than 6.5 cm, and in case of Tungsten sheet at 4.5 to 4.6 cm in 15 MV. The sheet was thinner than the existing lead shielding body thickness of 7 cm, and equivalent performance was confirmed. Through this study, the transmittance measurement sheet produced using Tungsten alloy filaments confirmed the possibility of transmission shielding in the high energy region. It has been confirmed that the usability as a substitute is also excellent. It is thought that it can be provided as basic data for the production of shielding agents with 3D printing technology in the future.

• The Korean Journal of Archival Studies
• /
• no.5
• /
• pp.39-85
• /
• 2002

This paper is aimed at proposing the policies for managing archives in the process of promoting Electronic Government System. Although there have been many studies of electronic government project and plans for its establishment, this research examines the electronic government system and its problems on the basis of archival science. What I acquired in this paper is as follows. The development of information technology needs great changes ranging from the nation to the individuals. It becomes common that the use of computerized program for business purposes, computerization of information materials and the effective way of search use of electronic documents. Therefore, more and more countries all over the world have been seeking to promote 'Electronic Government', which applies the fruits of the development in information technology to administration process. Recently, Korea has been rapidly entered into the 'Electronic Government' system being against the traditional way of administration. In electronic government system, the 'Life Cycle' of public records will be computerized. Therefore, it is important to change and develop along with the government's policies for 'electronic government project' in the archival management system. This means that the archival management system which have put emphasis on the textual records should be converted to electronic records system. In other words, the records management in electronic government system requires not the transfer and preservation of the records but the consistent management system including the whole process of creating, appraising, arranging, preserving and using the records. So, the systematic management of electronic records plays an important role in realization of electronic government, but it is a subject to be realized by electronic government at the same time. However, the government have overlooked the importance of archival management for long time, especially the importance of electronic records management system. First of all, this research attempts to infer limits and problems through the theoretical considerations of the existing studies for electronic government and to clear up the relations between electronic government and archival management. Based on this, I'll seek to progress the study through reviewing the present condition of archival management in the process of promoting electronic government and suggesting the policies for enhancing the successful electronic government and the construction of scientific archival management system. Since early 1990, many countries in the world have been making every effort to concrete 'Electronic Government'. Using the examples in other nations, it is not difficult to recognize that the embodiment of electronic government is closely connected with the archival management policies. Korea have completed legal and institutional equipments including the new establishment of "Electronic Government Law" to realize electronic government. Also, Korea has been promoting electronic government with the Ministry of Government Administration and Home Affairs and Government Computer Center as a leaders. Though managing records, especially the management of electronic records is essential in electronic government system, we haven't yet discussed this section in Korea. This is disapproved by the fact the Government Archives and Records Service has played little role in promoting electronic government project. There are two problems relating this environment. First, present system can't meet the consistent 'Life Cycle' ranging from the creation to the preservation of electronic records. Second, the 'Life Cycle' of electronic records is divided into two parts and managed separately by GCC and GARS. The life of records is not end with the process raged from creation to distribution. On the other hand, the records are approved their value only whole procedures. Therefore, GARS should play a deading role in designing and establishing the archival management system. The answer to these problems, is as follows. First, we have to complete the electronic records management system through introducing ERMS not EDMS. This means that we should not change and develop towards ERMS simply with supplementing the current electronic records management system. I confirm that it is important and proper to establish ERMS system from the very beginning of the process of promoting electronic government. Second, I suggest the developmental integration of GARS and GCC. At present, the divided operations of GCC and GARS, the former is in charge of the management center for electronic business and the latter is the hub institution of managing nation's records and archives result in many obstacles in establishing electronic government system and accomplishing the duties of systematic archival management. Therefore, I conclude that the expansive movement towards 'National Archives' through the integration among the related agencies will make a great contribution to the realization of electronic government and the establishment of archival management system. In addition to this, it will be of much help to constitute and operate the 'Task Force' regarding the management of electronic records with the two institution as the central figures.