• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.434-435
• /
• 2009

The crystalline silicon solar cell where the solar cell market grows rapidly is occupying of about 85% or more. high-efficiency and low cost endeavors many crystalline silicon solar cells. the fabrication processes of high-efficiency crystalline silicon solar cells necessitate complicated fabrication processes and Ti/Pd/Ag contact, however, this contact formation processed by expensive materials. Ni/Cu contact formation is good alternative. in this paper, according to temperature Ni silicide makes, produced Ni/Cu contact solar cell and measured conversion efficiency.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.1
• /
• pp.24-30
• /
• 1999

A biological filter for treatment of toluene among volatile organic compounds was studied. The investigation was conducted using specially built stainless steel columns packed with granular activated carbon and cold for removal of toluene. The G.A. and mold as filter material was also coated with Pseudomonas putida microorganisms.The biofilter unit was operated in the condition of moisture content vairation at gas loading rate of 12.5 l/min. Gaseous toluene taken from tedlar bag was analyzed by the use of G.C equipped with F.I.d detector. The removal efficiency of gaseous toluene was 95% at average inlet concentration of 950 ppm during bio-degradation operating condition. Effective removal efficiency was obtained with moisture content 27.5% at activated carbon and 32% at mold in this study. The effective operating condition were obtained with pH 6-8, temperature 28-42℃ for microbial degradation at gas loading rate of 12.5 l/min in packed material.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.947-948
• /
• 2011

Efficiency of Multi D.O.F spherical motor is one of the important performance indicators. So Through the reduction of eddy current loss on how to improve the efficiency were studied. Stator iron core's material with high permeability and resistivity of material using the eddy current loss was reduced. However, it was the disadvantages of production and economic. For these reasons, prevent eddy current loss of the iron core of multi D.O.F spherical motor as a viable alternative to motor using rotor with double-air gap.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.2
• /
• pp.94-97
• /
• 2018

Lead zirconate titanate/poly-vinylidene fluoride (PZT/PVDF) piezoelectric devices were fabricated by incorporating carbon nanotubes (CNTs), for use as flexible energy harvesting devices. CNTs were added to maximize the formation of the ${\beta}$ phase of PVDF to enhance the piezoelectricity of the devices. The phase transition of PVDF induced by the addition of CNTs was confirmed by analyzing the X-ray diffraction patterns, scanning electron microscopy images, and atomic force microscopy images. The enhanced output efficiency of the PZT/PVDF piezoelectric devices was confirmed by measuring the output current and voltage of the fabricated devices. The maximum output current and voltage of the PZT/PVDF piezoelectric devices was 200 nA and 350 mV, respectively, upon incorporation of 0.06 wt% CNTs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1206-1209
• /
• 2007

Both PM-OLEDs and AM-OLEDs are now in production. However, manufacturers are still concerned about life-time, voltage drift, operating voltage and efficiency in order to develop larger displays. Most material suppliers seem to be focussing on emitters and the benefits of introducing suitable charge transporters have been largely unexplored. OLED-T has developed a novel organic electron injector (Trade Name: EI-101) which evaporates at a very low temperature of $300^{\circ}C$ as opposed to the conventional LiF which requires $580^{\circ}C$. EI-101 has been found to increase the lifetime by up to 12%, reduce the voltage drift by up to 61% and increase the efficiency by up to 15%. The material can be handled in air and in situ Q-mass spectroscopy on extended thermal evaporation has confirmed its high stability for use in mass production.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1411-1414
• /
• 2007

We have developed a top-emitting white organic electroluminescent device (TWOLED) incorporating a low-reflectivity molybdenum (Mo) anode and doped transport layers as well as a dual-layer architecture of doped blue and yellow emitters with the same blue host. The EL efficiency and operational lifetime of TWOLED can be enhanced by a factor of 1.2 and 3.4 than that of standard TWOLED, respectively, with a co-doping technology in yellow emitter by doping another blue dopant. The enhancement in device performances can be attributed to improve the energy transfer efficiency from blue host to yellow dopant through a blue dopant as medium in yellow emitter.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.89-92
• /
• 1998

Amorphous chalcogenide thin films, especially a-(Se, S) based films, exhibit a number of photoinduced phenomena not observed in other types of amorphous thin films. The polarization holographic grating has been formed in amorphous As-Ge-Se-S thin films using two linearly polarized He-Ne laser light. In addition, dffraction efficiency has been measured by the same laser of a relative lower intensity at the same time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.212-215
• /
• 2005

Modified illumination techniques have been used to enhance the resolution of the sub-wavelength lithography. But, since they shield the central part of incident light, the light efficiency is seriously degraded, which in turn reduces the throughput of a lithography process. In this research, we introduced an annular illumination structure that enhances the light efficiency with a concentric circular grating at the backside of a photomask. The efficiency of the structure was theoretically analyzed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1042-1045
• /
• 2002

We have carried out two-beam interference experiments to form holographic gratings on amorphous $MgF_2$/As-Ge-Se-S multi-layer. In this study, holographic gratings have been formed using He-Ne laser(632.8nm). under different polarization combinations. The diffraction efficiency was obtained by +1st order intensity. The maximum diffraction efficiency of As-Ge-Se-S single layer and $MgF_2$/As-Ge-Se-S multi-layer were 0.8% and 1.4%

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.5-6
• /
• 2006

There are typically applied on both rear and front sides of electrical contacts to the solar cell. The front contact formation is particularly sensitive to many parameters. Accordingly patterning of front grid line is an important factor of solar cells. This paper describe the electrical conversion efficiency, inclusive of shading loss that gives various spacing between front metal grid lines. In experiments with variation of spacing. It was verified that the wide spacing of grid fingers could increase the series resistance, also the narrow spacing of grid fingers also implies a grid with a higher density of grid fingers. The sunlight of incidence was more of reflection by grid fingers. In result, the short circuit current, which contribute to conversion efficiency was decreased, because maximum power input was reduced and increase the series resistance.