• 한국정보과학회논문지:데이타베이스
• /
• 제36권6호
• /
• pp.466-475
• /
• 2009

다양한 온톨로지 개발로 온톨로지간에 정보공유와 재사용이 필요하게 되면서 온톨로지 매핑에 관련된 연구가 활발이 이루어지고 있다. 온톨로지 매핑 기법으로는 어휘 유사성, 구조 유사성, 인스턴스 유사성, 추론 유사성 검사 기법으로 나누어진다. 이 중 어휘 유사성 검사 기법은 대부분의 온톨로지 매핑 연구에서 사용하는 기법으로써 주로 워드넷에 정의되어 있는 동의어 집합만을 사용한다. 이에 본 연구에서는 워드넷에 정의되어 있는 동의어 집합 외에 상위어, 하위어, 전체어, 부분어 집합의 모든 단어들을 포함한 수퍼워드셋을 정의하고, 이것을 이용한 온톨로지 매핑 기법을 제안한다. 실험 결과에 의하면, 제안된 기법은 기존 온톨로지 매핑 기법보다 평균 12%까지 온톨로지 매칭율을 높인 것을 보여준다.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1963-1969
• /
• 2017

In order to overcome the manufacturing difficulty of the transverse-flux permanent magnet linear motor (TFPMLM) and enhance its performance much better, a novel TFPMLM with E-core and 3 dimension (3D) magnetic structures is proposed in this paper. Firstly, its basic structure and operating principle are presented. Then the equivalent 2D configuration of the TFPMLM is transformed, so that the Schwarz-Christoffel (SC) mapping method can be used to analyze the motor. Furthermore, the air gap flux density distribution is solved by SC mapping method, based on which, the EMF waveform, no-load cogging force waveform and load force waveform are obtained. Finally, the prototyped TLPMLM is manufactured and the results are obtained from the experiment and 3D FEM, respectively, which are used to compare with those from SC mapping method.

• 한국컴퓨터정보학회논문지
• /
• 제22권7호
• /
• pp.1-7
• /
• 2017

As the capacity of NAND flash module increases, the amount of RAM increases for caching and maintaining the FTL mapping information. In order to reduce the amount of mapping information managed in the RAM, a demand-based address mapping method stores the entire mapping information in the flash and some valid mapping information in the form of cache in the RAM so that the RAM can be used efficiently. However, when cache miss occurs, it is necessary to read the mapping information recorded in the flash, so overhead occurs to translate the address. If the RAM space is not enough, the cache hit ratio decreases, resulting in greater overhead. In this paper, we propose a method using two tables called TPMT(Translation Page Mapping Table) and SMT(Segmented Translation Page Mapping Table) to utilize both temporal locality and spatial locality more efficiently. A performance evaluation shows that this method can improve the cache hit ratio by up to 30% and reduces the extra translation operations by up to 72%, compared to the TPM scheme.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.359-362
• /
• 2003

In PDP(Plasma Display Panel), sub-field method is used to implement gray scale. Each sub-field has different periods. And Every gray level has information of which sub-field has to be displayed. This is called sub-field mapping. There are several sub-field mapping values in some gray levels. So, it is possible to select best choice in this paper, we propose new sub field mapping method using a fuzzy inference system to select best sub-field mapping values in accordance with input image and environment temperature. In order to implement fuzzy system, we used MATLAB fuzzy inference editor.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.119-124
• /
• 1999

A method to find the line of sight ray in space which corresponds to a point in an image plane is presented. The line of sight ray is defined by two points which are the intersections between the two calibration planes and the sight ray. The intersection point is found by the oblique coordinate mapping between the image plane and the calibration plane in the space. The proposed oblique coordinate mapping method has advantages over the transformation matrix method in the required memory space and computation time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.741-744
• /
• 2008

In this paper, tone mapping method by local contrast and detail enhancement for High Dynamic Range (HDR) is proposed. By applying Piecewise Dynamic Range Histogram Adjustment (PDRHA) and Detail Enhancement Volume (DEV) with decomposed layers, tone mapping is performed effectively. The experimental results show that the proposed method preserves local contrast and overall impression with naturalness of original images.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2002년도 춘계 학술발표회
• /
• pp.10-18
• /
• 2002

On the process of cross-media color reproduction, a key feature is the use of gamut mapping techniques to adjust the different color gamuts between displays and printers. Even though a number of GMAs have been published, but there are no method satisfactory enough for more exect color reproduction. In this paper, the gamut mapping methods of nearest point clipping(NPC), centroid clipping (SLIN), straight clipping and cusp clipping(CUSP) were tested and analyzed with color difference, and a new gamut mapping algorithm based on variable anchor point method was proposed.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제9권6호
• /
• pp.718-731
• /
• 2003

높은 가용성, 확장성, 시스템 성능의 요구를 만족시키기 위해 SAN(Storage Area Network)이 등장했다. 대부분의 SAM 운영 S/W들은 SAN을 보다 효과적으로 활용하기 위해서 SAN에 부착된 물리적 저장장치들을 가상적으로 하나의 커다란 볼륨으로 보이게 하는 저장장치 가상화 개념을 지원한다. 저장장치 가상화의 핵심적인 역할을 하는 것이 바로 논리볼륨 관리자이다. 논리볼륨 관리자는 논리주소를 물리 주소로 매핑 시킴으로서 저장장치 가상화를 실현한다. 이 논문에서는 논리볼륨 관리자를 위한 효율적이고 유연한 매핑기법을 설계하고 구현한다. 더불어 매핑 테이블 기반 매핑 방법에서 유연한 매핑을 돕기 위한 자유공간 관리기법을 설계하고 구현한다. 이 논문의 매핑기법은 특정 시점의 볼륨이미지를 유지할 수 있는 스냅샷과 시스템을 정지시키지 않고 SAN에 저장장치를 추가 또는 삭제할 수 있는 온라인 재구성 기능을 지원한다. 또한 이 논문에서 제안한 기법에 대한 성능 평가를 수행하여 제안하는 기법이 매핑 관리자로서 의미가 있음을 보인다.

• Journal of information and communication convergence engineering
• /
• 제5권2호
• /
• pp.131-135
• /
• 2007

In this paper, The proposed algorithm consists of three steps. In the first step, TD(Transition Density) calculation has to be performed. a CLB-based CPLD low-power technology mapping algorithm considered a Trade-off is proposed. To perform low-power technology mapping for CPLDs, a given Boolean network has to be represented in a DAG. Total power consumption is obtained by calculating the switching activity of each node in a DAG. In the second step, the feasible clusters are generated by considering the following conditions: the number of inputs and outputs, the number of OR terms for CLB within a CPLD. The common node cluster merging method, the node separation method, and the node duplication method are used to produce the feasible clusters. In the final step, low-power technology mapping based on the CLBs packs the feasible clusters. The proposed algorithm is examined using SIS benchmarks. When the number of OR terms is five, the experiment results show that power consumption is reduced by 30.73% compared with TEMPLA, and by 17.11 % compared with PLA mapping.

• Journal of information and communication convergence engineering
• /
• 제5권1호
• /
• pp.59-63
• /
• 2007

In this paper, a CLB-based CPLD low-power technology mapping algorithm considered a Trade-off is proposed. To perform low-power technology mapping for CPLDs, a given Boolean network has to be represented in a DAG. The proposed algorithm consists of three steps. In the first step, TD(Transition Density) calculation has to be performed. Total power consumption is obtained by calculating the switching activity of each node in a DAG. In the second step, the feasible clusters are generated by considering the following conditions: the number of inputs and outputs, the number of OR terms for CLB within a CPLD. The common node cluster merging method, the node separation method, and the node duplication method are used to produce the feasible clusters. In the final step, low-power technology mapping based on the CLBs packs the feasible clusters. The proposed algorithm is examined using SIS benchmarks. When the number of OR terms is five, the experiment results show that power consumption is reduced by 30.73% compared with TEMPLA, and by 17.11 % compared with PLA mapping.