• 산업경영시스템학회지
• /
• 제22권49호
• /
• pp.33-41
• /
• 1999

The original tolerances, which are assigned by designers on the basis of handbooks and experience, cannot always be expected to be optimal or feasible, because they may yield an unacceptable manufacturing costs. So the systematic tolerance design considering manufacturing costs should be done. Therefore, this research analyzes the tolerance within the tolerance design using Monte-Carlo simulation method and sensitivity analysis and using genetic algorithm by tolerance allocation method. The genetic algorithm was developed for allocation of the optimal tolerance under the manufacturing limitation cost.

• 한국유체기계학회 논문집
• /
• 제2권3호
• /
• pp.30-36
• /
• 1999

Blade shape profile in the axial compressor is one of the most important factors governing its aerodynamic characteristics. Manufacturing tolerance, which is inevitable in the blade manufacturing processes, may change blade profile and as a consequence, it will affect the compressor performance. In this paper, influence of manufacturing tolerance on the aerodynamic characteristics of axial compressor blades with distortion of blade profile curvatures is investigated by using a flow simulation technique. It is found that manufacturing tolerance can be an important factor affecting the source of both profile and wake losses of the axial compressor blades.

• 대한안전경영과학회지
• /
• 제3권3호
• /
• pp.221-230
• /
• 2001

The assembly tolerance design methods have applied linear or nonlinear programming methods and used simulation method and search algorithms to optimize the tolerance allocation of each part in an assembly. However, those methods are only considered to the relationship between tolerance and manufacturing cost, which do not consider a quality loss cost for each part tolerance. In this paper, the integrated simulation model used genetic algorithm and the Monte-Carlo simulation method was developed for the allocation of the optimal tolerance considering the manufacturing cost and quality loss cost.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.241-244
• /
• 2004

Dimension and tolerance are very important factors both in a design stage and in a manufacturing stage. As a part of process planning, the tolerance transfer aims at determining the method for converting design dimensions and tolerances into manufacturing dimensions and tolerances based on a given drawing. A procedure for the tolerance transfer is proposed in this paper. Tolerance chart is a valuable graphical tool for a process planner to determine the manufacturing dimensions and tolerances, and consisted of several steps. Among several steps necessary for making up the tolerance chart, the methods for the identification of dimension chain, the determination of tolerances, and the calculation of operational dimensions are presented by using concepts and new presentation methods. A solution method for each step is derived which will be used to establish the tolerance transfer techniques.

• 한국생산제조학회지
• /
• 제9권1호
• /
• pp.45-52
• /
• 2000

The purpose of this research was developing an integrated way to solve two typical tolerance optimization problem i.e. optimal tolerance allotment and design centering. A new problem definition design centering-tolerance allotment problem (DCTA) was proposed here for the first time and solved. Genetic algorithm and coarse Monte Carlo simulation were used to solve the stochastic optimization problem. Optimal costs were compared with the costs from the previous optimization strategies Significant cost reductions were achieved by DCTA scheme.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.81-87
• /
• 2004

This paper deals with a new approach to tolerance optimization problems. Optimal tolerance allotment problems can be formulated as stochastic optimization problems. Most schemes to solve the stochastic optimization problems have been found to exhibit difficulties in multivariate integration of the probability density function. As a typical example of stochastic optimization the optimal tolerance allotment problem has the same difficulties. In this stochastic model, manufacturing system is represented by Gauss-Markov stochastic process and the manufacturing unit availability is characterized for realistic optimization modeling. The new algorithm performed robustly for a large deviation approximation. A significant reduction in computation time was observed compared to the results obtained in previous studies.

• 한국CDE학회논문집
• /
• 제13권3호
• /
• pp.235-242
• /
• 2008

This paper proposes a method for improving the process plan quality by use of dimensional tolerances. Dimensioning and tolerancing plays a key role in manufacturing process plan because the final part must ensure conformance with the dimensions and tolerances in its drawing. As a first step for the improvement of process plan quality, two resultant tolerances in design and process plan should be compared each other, and so a tolerance chart is used for acquisition and comparison of the two tolerances. In addition to two kinds of design and manufacturing tolerances, operational sequences or paths for the resultant dimension and tolerance are additionally recognized for measuring the quality of process plan quantitatively. Rooted tree is applied to find the related paths for the manufacturing resultant tolerances. A quality coefficient is defined by the components of two tolerances and their relations, the paths related to manufacturing resultant tolerances and the difficulty of an operation. In order to improve the quality of manufacturing process plan, the paths that two kinds of tolerances are the same or different in the rooted tree are recognized respectively and a method for tolerance rearrangement is developed. A procedure for improving the quality is suggested by combining the coefficient and the tolerance rearrangement method. A case study is applied to illustrate the efficiency of improvement method.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 춘계학술대회
• /
• pp.417-428
• /
• 2008

Designers have to consider voice of customer, process capability, manufacturing standards & condition, manufacturing method, characteristics of products to decide tolerances. Especially, in case of position of hole and pin, designers have to consider process capability to decide tolerances. The traditional position tolerances used in a drawing are theoretical values which are allocated to position under the worst case assembling condition that both hole and pin are the maximum material condition(MMC). However, When the process capability is high, more exact product size can be produced under stable manufacturing condition. larger clearance of hole and pin can be allocated. In this point of view, manufacturer could increase the yield by allocating larger position tolerance than theoretical position tolerance of hole and pin considering process capability.

• 대한안전경영과학회지
• /
• 제11권1호
• /
• pp.75-85
• /
• 2009

Designers have to consider voice of customer, process capability, manufacturing standards & condition, manufacturing method and characteristics of products to decide tolerances. Especially, in case of position of hole and pin, designers have to consider process capability to decide tolerances. The traditional position tolerances used in a drawing are theoretical values which are allocated to position under the worst case assembling condition that both hole and pin are the maximum material condition(MMC). However, when the process capability is high, more exact product size can be produced under stable manufacturing condition. Larger clearance of hole and pin can be allocated. In this point of view, manufacturer could increase the yield by allocating larger position tolerance than theoretical position tolerance of hole and pin considering process capability.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1063-1068
• /
• 2008

A lens system of a camera module for mobile phones is comprised of the composition and design of various shapes of lens. To improve responses such as the modular transfer function (MTF), a lens system should always be constructed by considering uncertainty that can be caused by manufacturing and assembly error. In this study, tolerance optimization using the Latin Hypercube Sampling (LHS) technique is performed. In order to reduce the computational burden of the tolerance optimization process and decrease the influence from numerical noise effectively, we use the Progressive Quadratic Response Surface Modeling (PQRSM), which is one of Sequential Approximate Optimization (SAO) techniques. Using this method, we achieved optimal tolerance for each lens and obtained reliability for satisfying user‘s requirements. In addition, through the design process the manufacturing and assembly cost of a lens system was reduced.