• Journal of the Korean Applied Science and Technology
• /
• 제28권1호
• /
• pp.35-47
• /
• 2011

For the synthesis of water soluble acrylic modified epoxyester resin, fatty acid/epoxy ratio of 50/50 was used, and introduced maleic anhydride. Ratio of styrene/acrylic acid of acrylic monomers was fixed 85/15 and ratio of epoxyester/acrylic monomer was controlled 80/20, 75/25, 70/30, 65/35, and degree of neutralization were changed 65%, 80%, to 100%. As a result, 40% solids acrylic modified epoxyester resins were synthesized. Resins were evaluated water soluble stability, drying time, water resistant, storage stability and physical properties. And the white paints were prepared, and were evaluated viscosity, drying time, water resistance, adhesion, sagging, spray workability, gloss, salt spray resistance, skinning, whiteness and flash rust. As a result, the degree of neutralization of 100% and the ratio of epoxyester/acrylic monomer of 75/25 showed the best properties.

• Journal of the Korean Wood Science and Technology
• /
• 제37권5호
• /
• pp.426-433
• /
• 2009

This study investigates the tensile and morphological properties of nanocomposites prepared from poly(lactic acid) (PLA), wood flour (WF) and montmorillonite (MMT) by melt compounding with a twin screw extruder. In order to enhance the mechanical properties of PLA/WF composites, maleic anhydride grafted PLA (MAPLA) is synthesized as a compatibilizer. MAPLA prepared in the laboratory is characterized using FT-IR (Fourier transformed infrared spectroscopy). From the results of X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis for nanocomposites, we confirmed that silicate layers of MMT are intercalated and partially exfoliated. When 2 wt% MAPLA is added, the tensile strength and modulus of PLA/WF/MAPLA composites were higher than those of the PLA/WF composite. The addition of MMT increases the tensile modulus of PLA/WF/MAPLA composites but decreases the tensile strength.

• Journal of the Korean Wood Science and Technology
• /
• 제37권5호
• /
• pp.434-439
• /
• 2009

This study investigates the thermal properties of nanocomposites prepared from poly(lactic acid) (PLA), wood flour (WF) and montmorillonite (MMT) by melt compounding with a twin screw extruder. In order to enhance the mechanical properties of PLA/WF composites, maleic anhydride grafted PLA (MAPLA) is synthesized as a compatibilizer. MAPLA prepared in the laboratory is characterized using FR-IR. From SEM microphotographs, the presence of MAPLA has a positive effect on the mechanical properties of WF-reinforced PLA composites. The addition of WF/MAPLA into neat PLA increased the glass transition temperature ($T_g$). The addition of 1 to 5 wt% MMT into PLA/WF/MAPLA composite decreases the $T_g$. The cold crystallization temperature ($T_{cc}$) was decreased by the addition of MMT. The MMT could act as effective nucleating sites of PLA crystallization. The thermal stability evaluated by thermogravimetric analysis (TGA) is improved with the contents of MMT up to 3 wt%.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제46권6호
• /
• pp.50-55
• /
• 2014

An oxidized starch was modified for surface sizing via etherification and esterification. Propylene oxide (PO), sodium monochloroacetate (SMCA), and acrylonitrile (AN) were used as etherification, and vinyl acetate monomer (VAM), maleic anhydride (MA), fumaric acid (FA), and itaconic acid (ITA) were used for esterification. Esterification and etherification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14 to 16%. Surface sizing performance of starches in tensile strength, stiffness and compressive strength was improved by esterification and etherification of the oxidized starch. Especially, SMCA etherification was found to be the most effective modification method.

• Journal of Integrative Natural Science
• /
• 제3권3호
• /
• pp.174-180
• /
• 2010

This study was conducted to investigate the major chemical components of dried Capsosiphon fulvescens. The proximate compositions of C. fulvescens as dry matter basis were the moisture content 6.27%, 27.66% of crude protein, 1.68% of crude fat, 10.69% of crude ash, and 53.70% of carbohydrate, respectively. Analysing total amino acids, 17 kinds of components isolated from C. fulvescens. The essential amino acid contained in C. fulvescens accounted for 42.33% of total amino acid, while the non-essential amino acid accounted for 57.67%. Fatty acids were of 13.34% of saturated fatty acids, 21.69% of monounsaturated fatty acids and 64.97% of polyunsaturated fatty acids. Linoleic acid, oleic acid, palmitic acid and linolenic acid were the major fatty acids among 14 fatty acids detected in dried C. fulvescens. Oxalic acid was the major organic acids. The contents of vitamin A and vitamin E were 0.021 mg% and 0.001 mg%, respectively. The mineral contents of dried C. fulvescens were greater in order of Mg

• 대한치주과학회:학술대회논문집
• /
• 대한치주과학회 2005년도 제45회 종합학술대회 연제초록
• /
• pp.168-169
• /
• 2005

• YAKHAK HOEJI
• /
• 제32권6호
• /
• pp.394-401
• /
• 1988

Lactobacillus casei was treated with N-methyl-N'-nitro-N-nitrosoguanidine(NTG) to obtain resistant mutants to rifampicin. Freshly grown cells of the strain suspended in tris-maleic acid buffer were exposed to NTG of $50{\mu}g/ml$ for 30min. Five colonies of the NTG-induced mutants showed distinct resistance to rifampicin. They also exhibited identical characteristics with the original Lactobacillus casei when they were tested for growth, titrable acidity and sugar fermentation. It is suggested that they can be utilized as efficieient starter cultures for fermented milk.

• Archives of Pharmacal Research
• /
• 제28권3호
• /
• pp.364-369
• /
• 2005

HPMC (Hydroxypropyl methylcellulose) was chemically modified, using maleic anhydrides, to obtain pH-sensitive HPMCAM (Hydroxypropyl methylcellulose acetate maleate) polymers for use as novel duodenum-specific coating agents. The pharmaceutical properties of HPMCAM, such as film forming, acid values, pH-sensitive values, water vapor permeability, tensile strength and Tg, were investigated, and found to show good film forming properties. The pH­sensitive values were 3.0 to 3.7. In vitro results demonstrate that HPMCAM could completely suppress drug release within 2h in a simulated gastric fluid (pH 1.2) and rapidly release the drug in a simulated pathological duodenal fluid (pH 3.4). These results indicate that HPMCAM might be a useful material for a duodenum-specific drug delivery system.

• Elastomers and Composites
• /
• 제27권4호
• /
• pp.267-274
• /
• 1992

Polydimethylsiloxane(PDMS)-containing polyurethane coating materials were synthesized because PDMS-based elastomers have unique properties including an extremely low glass transition temperature, good thermal and oxidative stability, and good dielectric properties. In this experiment a vinyl copolymer which consisted of vinyl chloride, vinyl acetate, vinyl alcohol, and maleic acid was used, and Coronate L was used as a polyisocyanate. PDMS-containing polyurethane was synthesized from polydimethylsiloxane, MDI, and 1,4-butanediol. Films were casted by reaction of viny copolymer, Coronate L, and PDMS-containing polyurethane. Thickness of tile films were $150-170{\mu}m$ and the films were characterized by IR, DSC, and Instron.

• Journal of Industrial Technology
• /
• 제31권A호
• /
• pp.59-62
• /
• 2011

The demineralizing effect of chelating agents(Maleic acid solution, EDTA salts solutions; disodium-, trisodium- and tetrasodium-EDTA) on hydroxyapatite(HA) for the root canal dentin treatment was investigated. Dissolution of Ca from HA was increased with increasing immersion time in chelating solutions. Among the EDTA salts solutions, tetrasodium-EDTA was least effective in dissolving Ca out from HA, and trisodium-EDTA was the most effective. Trisodium-EDTA solutionmight be more effective in removing the smear layer compared to tetrasodium-EDTA solution.