• 벤처창업연구
• /
• 제18권1호
• /
• pp.31-46
• /
• 2023

본 연구는 액셀러레이터 보육 프로그램의 학습방식에 관하여 글로벌 지향 ICT 분야 액셀러레이터를 중심으로 스타트업에 제공하는 학습방식을 분류 및 확인하였다. 액셀러레이터 보육 프로그램 운영을 담당하는 액셀러레이터 실무자 8개 사의 인터뷰를 진행하고, 인터뷰 결과를 질적 분석하여 액셀러레이터가 보육 프로그램을 통해 스타트업에 제공하는 다양한 학습방식을 도출하여 시사점을 제공하였다. 학습방식을 확인 및 분류하기 위해 연구자가 다양한 선행문헌을 검토하여 사용이 적절하다고 판단한 경험축적, 관찰, 실험, 시행착오, 임기응변의 학습방식을 질적 분석의 a priori code로 활용하였고, 인터뷰 결과는 주제분석을 통해 분석하였다. 연구결과 액셀러레이터의 보육 프로그램이 스타트업에 제공하는 학습방식은 경험축적, 관찰, 시행착오, 실험, 임기응변 등 5개의 범주 별 각 2개, 총 10개의 하위범주를 도출하여 확인하였다. 본 연구는 액셀러레이터의 주요 기능인 보육 프로그램에 관한 연구가 부족한 상황에서 학습에 대한 관점에서 액셀러레이터의 보육 프로그램이 보육 스타트업에 어떤 학습방식을 제공하고 있는지에 대한 결과를 도출하였다. 이는 학문적 및 실무적으로 액셀러레이터의 보육 프로그램이 스타트업에 제공하는 학습방식에 대한 이해도를 높이고, 조직학습에 대한 관점에서 액셀러레이터의 보육 프로그램이 보육 스타트업에 어떤 학습방식을 제공하고 있는지에 대한 관점을 확대했다는 점에서 의의가 있다. 액셀러레이터는 보육 스타트업에 충분한 학 습방식을 제공할 수 있는 보육 프로그램 개선에 활용할 수 있으며, 보육 프로그램 참여를 고민하는 스타트업이라면 보육 프로그램 참여를 결정하는 데도 도움이 될 수 있다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제6권10호
• /
• pp.487-492
• /
• 2017

클러스터링은 빅데이터 분석 및 데이터 마이닝 분야에서 데이터 간 유사성을 파악하기 위해 사용하는 기법으로 다양한 클러스터링 기법 중 범주적 데이터를 위해 k-Modes 알고리즘이 대표적으로 사용된다. k-Modes와 같이 반복적 연산이 집중된 작업의 속도를 향상시키기 위해 많은 관심을 받고 있는 분산 병행 프레임워크 스파크는 하둡과 달리 RDD라는 추상화 객체 개념을 사용하여 대용량의 데이터를 메모리 상에서 처리 가능한 환경을 제공한다. 스파크는 다양한 기계학습을 위한 라이브러리인 Mllib을 제공하고 있으나 연속적 데이터만 처리 가능한 k-means만 포함되어 있어 범주적 데이터 처리가 불가능한 한계가 있다. 따라서 본 논문에서는 스파크 환경에서 범주적 데이터 클러스터링을 위한 k-Modes 알고리즘을 위한 RDD 설계하고 효과적으로 동작할 수 있는 알고리즘을 구현하였다. 실험을 통해 제안한 알고리즘이 스파크 환경에서 선형적으로 증가한다는 것을 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.37-43
• /
• 2002

In this paper, we analyse and present mechanical dynamic characteristics of a micro-machined vibrating silicon ring gyroscope which can measure angular velocities about three orthogonal axes. The ring gyroscope has a ring connected to the gyroscope main body by support-ligaments which are arranged with cyclic symmetry. The natural modes of its vibration can be distinguished into the in-plane motion and the out-of-plane motion which are coupled by the gyro-effect due to the rotation of the gyroscope main body. The equations of motion, the response to angular velocities, and the relationships between the natural modes of vibration are derived and compared with the previous studies for the design of a micro three-axis ring gyroscope.

• Coupled systems mechanics
• /
• 제2권4호
• /
• pp.303-327
• /
• 2013

The coupled free vibration of flexible structures and on-board liquid in zero gravity space was analyzed, considering the spacecraft main body as a rigid mass, the flexible appendages as two elastic beams, and the on-board liquid as a "spring-mass" system. Using the Lagrangians of a rigid mass (spacecraft main body), "spring-mass" (liquid), and two beams (flexible appendages), as well as assuming symmetric motion of the system, we obtained the frequency equations of the coupled system by applying Rayleigh-Ritz method. Solving these frequency equations, which are governed by three system parameters, as an eigenvalue problem, we obtained the coupled natural frequencies and vibration modes. We define the parameter for evaluating the magnitudes of coupled motions of the added mass (liquid) and beam (appendages). It was found that when varying one system parameter, the frequency curves veer, vibration modes exchange, and the significant coupling occurs not in the region closest to the two frequency curves but in the two regions separate from that region.

• 한국소음진동공학회논문집
• /
• 제12권12호
• /
• pp.1001-1009
• /
• 2002

In this paper, we analyse and present mechanical dynamic characteristics of a micro-machined vibrating silicon ring gyroscope which can measure angular velocities about three orthogonal axes. The ring gyroscope has a ring connected to the gyroscope main body by support-ligaments which are arranged with cyclic symmetry. The natural modes of its vibration can be distinguished into the in-plane motion and the out-of-plane motion which are coupled by the gyro-effect due to the rotation of the gyroscope main body. The equations of motion, the response to angular velocities, and the relationships between the natural modes of vibration are derived and compared with the previous studies for the design of a micro three-axis ring gyroscope.

• 한국소음진동공학회논문집
• /
• 제19권2호
• /
• pp.200-207
• /
• 2009

Complex systems are made of many subsystems, those are developed and manufactured by many part companies. Even though the information for a part is necessary to analyze the performance of the other part, it is not so easy to get the information for that part from other companies due to many reasons like security or compatibilities. If the modal parameters of a system between the connecting points are available, we can reconstruct a reduced model for that system in a physical coordinate not in a generalized coordinate. The assemble of the equations of motion for the main system and the reduced equations of motion for the connected system can give a response of the main system considering the effects of connected systems. The results show that the proposed method can give the response of a system accurately. The rule for the selection of modes is to use the fundamental modes whose natural frequencies are low.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.113-122
• /
• 2014

The objective of the paper is to clarify a methodology based on the use of the existing component mode synthesis methods for the case of two damped substructures which are coupled through a linking viscoelastic flexible substructure and for which the structural modes with free geometrical interface are used for each main substructure. The proposed methodology corresponds to a convenient alternative to the direct use either of the Craig-Bampton method applied to the three substructures (using the fixed geometric interface modes) or of the flexibility residual approaches initiated by MacNeal (using the free geometric interface modes). In opposite to a geometrical interface which is a topological interface on which there is a direct linkage between the degrees of freedom of substructures, we consider a physical flexible interface which exists in certain present technologies and for which the general framework linear viscoelasticity is used and yields a frequency-dependent damping and stiffness matrices of the physical flexible interface.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.442-445
• /
• 1997

With increasing use of high strength concrete tied columns in structural engineering, it becomes necessary to examine the applicability of related sections of current design codes. High strength concrete has an advantage of strength capacity and stiffness especially for column elements. This paper presents an experimental study of high strength concrete tied columns subjected to eccentric loading. The main variables included in this test were concrete compressive strength, steel amount, eccentricity, and slenderness ratio. The concrete compressive strength varied from 34.9Mpa(356kg/$\textrm{cm}^2$ ) to 93.2Mpa(951kg/$\textrm{cm}^2$ ) and the longitudinal steel ratios were between 1.1% and 5.5%. The eccentricity was selected for the different failure modes, i.e., compression control, balanced point, and tension control. The slenderness ratio varied from 19 to 61. The column specimens with same slenderness ratio but with different concrete compressive strength were constructed and tested. The purpose of this paper is to show failure modes of high strength reinforced concrete columns.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.849-859
• /
• 2015

This paper proposes a novel compound-type hybrid energy storage system (HESS) that inherits the unique advantages of both battery/supercapacitor (SC) and the SC/battery HESSs for electric vehicles (EVs). Eight operation modes are designed to match this system. A mode control strategy is developed for this HESS on the basis of these modes, and five classes of operation modes are established to simplify this strategy. The mode control strategy focuses on high operating efficiency and high power output. Furthermore, the compound-type HESS is designed such that the SC is the main priority in braking energy absorption. Thus, this HESS can operate efficiently and extend battery life. Simulation results also show that the compound-type HESS can not only supply adequate power to the motor inverter but can also determine suitable operation modes in corresponding conditions. Experimental results demonstrate that this HESS can extend battery life as well. The overall efficiency of the compound-type HESS is higher than those of the battery/SC and the SC/battery HESSs.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.1260-1264
• /
• 2009

Precipitation time series is a mixture of complicate fluctuation and changes. The monthly precipitation data of 61 stations during 36 years (1973-2008) in Korea are comprehensively analyzed using the EOFs technique and CSEOFs technique respectively. The main motivation for employing this technique in the present study is to investigate the physical processes associated with the evolution of the precipitation from observation data. The twenty-five leading EOF modes account for 98.05% of the total monthly variance, and the first two modes account for 83.68% of total variation. The first mode exhibits traditional spatial pattern with annual cycle of corresponding PC time series and second mode shows strong North South gradient. In CSEOF analysis, the twenty-five leading CSEOF modes account for 98.58% of the total monthly variance, and the first two modes account for 78.69% of total variation, these first two patterns' spatial distribution show monthly spatial variation. The corresponding mode's PC time series reveals the annual cycle on a monthly time scale and long-term fluctuation and first mode's PC time series shows increasing linear trend which represents that spatial and temporal variability of first mode pattern has strengthened. Compared with the EOFs analysis, the CSEOFs analysis preferably exhibits the spatial distribution and temporal evolution characteristics and variability of Korean historical precipitation.