• 비파괴검사학회지
• /
• 제28권5호
• /
• pp.395-400
• /
• 2008

비자성 및 자성 금속 시편의 표면 결함을 검출하기 위하여 교류자기장을 이용하였다. 비파괴 센서 프로브는 자성 박막 요크와 박막형 코일로 구성된 신호 검출부와 시편에 교류자기장을 인가하기 위한 단일 직선을 이용한 여기 코일로 이루어져 있다. 박막형 유도 코일 센서는 스퍼터, 전기도금, 건식 식각과 사진식각 공정을 이용하여 제작되었다. 시편에 교류자기장을 인가하기 위하여 0.7 MHz-1.8 MHz 주파수 영역에서 0.1A-1.0A의 교류전류를 여기코일에 인가하였다. 센서의 특성은 최소 0.5 mm의 깊이와 폭을 가진 인위적인 슬릿 형태 비자성체 Al과 자성체 FeC 결함 시편을 이용하여 측정하였다. 측정된 신호는 높은 감도를 갖고 결함 시편위의 슬릿결함의 위치와 일치함을 알 수 있었다. 또한 박막형 유도 코일 센서를 이용하여 마이크론 크기의 표면 결함을 가진 자성체 FeC의 시편을 비접촉 스캔하여 측정된 유도전압의 변화를 이미지화 하였으며 그 결과를 광학적 이미지와 비교하였다.

• 센서학회지
• /
• 제30권5호
• /
• pp.342-348
• /
• 2021

For the characterization or failure analysis of electronic devices such as PCB (printed circuit boards), the most common method is the measurement of voltage waveforms with an oscilloscope. However, because there are many types of problems that cannot be detected by voltage waveform analysis, several other methods such as X-ray transmission, infrared imaging, or eddy current measurement have been applied for these analyses. However, these methods have also been limited to general analyses because they are partially useful in detecting physical defects, such as disconnections or short circuits. Fundamentally current waveform measurements during the operation of electronic devices need to be performed, however, commercially available current sensors have not yet been developed, particularly for applications in highly integrated PCB products with sub-millimeter fine pitch. In this study, we developed a highly sensitive PHR (planar hall resistance) magnetic sensor for application in highly integrated PCBs. The developed magnetic sensor exhibited sufficient features of an ultra-small size of less than 340 ㎛, magnetic field resolution of 10 nT, and current resolution of 1 mA, which can be applicable for PCB analyses. In this work, we introduce the development process of the magnetic sensing probe and its characteristic results in detail, and aim to extend this pin-type current probe to applications such as current distribution imaging of PCBs.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.795-800
• /
• 2009

Surface plasmon resonance (SPR) has been widely used for biological and chemical sensing applications. The present study investigates numerically the optical characteristics for the single Au film and bimetallic Ag/Au film SPR configurations by using the multiple beam interference matrix (MBIM) method. We use the prism coupling method, especially Kretschmann configuration for excitation of surface plasmon wave (SPW). The estimated results of reflectance, phase shift and magnetic field intensity enhancement factor are provided for finding out the optimum configuration with high sensitivity for SPR measurement. As a result, the optimum thicknesses are found to be 52 nm for a single Au film and 5 nm to 36 nm for bimetallic Ag-Au film. From the comparison of full width half maximum (FWHM) values for reflectance, phase shift, and enhancement of magnetic field intensity, it is concluded that the highest sensitivity can be obtained when using the phase shift for SPR sensor.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.782-783
• /
• 2011

본 연구에서는 자동차 부품 가공공정에서 적용하는 캐스케이드 디버링(cascade deburring) 후 잔존하는 스틸볼(steel ball)을 자동으로 감지하기위한 시스템을 구현하였다. 구현된 시스템은 자화부, 검출부, 제어부, PC 모니터링부로 구성되었다. 스틸볼 착자화 및 감지 정밀도의 향상, 외부노이즈 대응능력 등의 환경 변화에 영향을 받지 않는 신뢰성이 뛰어난 성능을 갖는 시스템을 구현하고자 하였으며 이를 위한 미세 스틸볼 감지시스템의 착자화부를 구현하고 성능평가를 수행하였다.

• 제어로봇시스템학회논문지
• /
• 제11권3호
• /
• pp.187-192
• /
• 2005

This paper presents the design of the Automatic Gain Control (AGC) system for the drive axis of a electro-magnetic driven cylinder gyroscope. The simulation and experimental results show that the designed AGC excites the cylinder at its natural frequency and maintains a specified amplitude of oscillations, and also track the natural frequency shifts due to temperature variations. The sensing performance of the AGC driven gyroscope is shown to be greatly improved compared to that of the open-loop driven one.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.196-196
• /
• 2000

This paper describes a lateral guidance system of an autonomous vehicle, using a neural network model of magneto-resistive sensor and magnetic fields. The model equation was compared with experimental sensing data. We found that the experimental result has a negligible difference from the modeling equation result. We verified that the modeling equation can be used in simulations. As the neural network controller acquires magnetic field values(B$\_$x/, B$\_$y/, B$\_$z/) from the three-axis, the controller outputs a steering angle. The controller uses the back-propagation algorithms of neural network. The learning pattern acquisition was obtained using computer simulation, which is more exact than human driving. The simulation program was developed in order to verify the acquisition of the teaming pattern, teaming itself, and the adequacy of the design controller. The performance of the controller can be verified through simulation. The real autonomous electric vehicle using neural network controller verified good results.

• 센서학회지
• /
• 제14권2호
• /
• pp.85-90
• /
• 2005

In this study, we have fabricated a three branches vertical Hall sensor for detecting three phases rotation informations of miniaturized brushless motor. The sensor gives three position signals phase shifted by $120^{\circ}$, corresponding to the motor driving signals. The branch has one Hall output and one input each other. The central part acts as common driving input. Sensor has branch width of $150{\mu}m$ and distance from central electrode to Hall electrode of $100{\mu}m$. The sensitivity of sensor is 250 V/$A{\cdot}T$ at magnetic field of 0.1 T. It has also showed three sine waves of Hall voltages with $120^{\circ}$ phase over a $360^{\circ}$ rotation. A packaged sensing part are $2{\times}2mm^{2}$ and has been successfully tested on a motor rotation at a speed up to 60,000 rpm.

• 센서학회지
• /
• 제19권6호
• /
• pp.475-482
• /
• 2010

Rogowski coil which detects magnetic flux on current changes. It is used for digital integration with watt-hour meter's current sensor, because, Rogowski coil has non-cored or non-magnetic core structure, so that, it cannot be saturated magnetically. This is a study for inventing accurate electric current sensors that have been applied on multi-layer ceramic substrate. We have confirmed its properties from each different layer's materials and pattern sizes by MWS 3D Electromagnetic field analysis program. And, after sensor manufacturing on multi-layer ceramic substrate, we confirmed its sensing quality is reliable as accurate electric current sensor for watt-hour meter.

• 한국컴퓨터정보학회논문지
• /
• 제6권3호
• /
• pp.35-43
• /
• 2001

지하매설물을 탐지하는 기술에는 매설물의 송신기(transmitter)를 이용하여 전자기장을 가하여 매설물을 자화시켜 땅위의 상부에서 자속을 감지하여 매설물의 위치를 찾아내는 기술로 현재 가장 널리 사용되는 방식이다. 본 논문에서는 땅속에 일정 자계를 형성하여 그 자속 변화를 감지해 매설물 유무를 판단하는 방식과 지하매설물의 탐지시스템의 제어 및 표시 장치의 설계와 구성에 대하여 제안하였다. 또한 지하매설물의 탐지시스템의 시뮬레이션을 통하여 지하매설물의 판단 유무를 측정할 수 있음을 보였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.246.1-246.1
• /
• 2007