• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.953-954
• /
• 2008

Wireless Sensor Network (WSN) surveillance applications usually employed magnetometer for recognizing the ferrous objects. Novel magnetic sensing model which includes azimuth parameter is suggested to understand the anisotropic characteristic of magnetic field through numerous outdoor experiments.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.364-371
• /
• 2015

In this study, we developed a feasible structure of a textile-based inductive sensor using a machine embroidery method, and applied it to a non-contact type vital sign sensing device based on the principle of magnetic-induced conductivity. The mechanical heart activity signals acquired through the inductive sensor embroidered with conductive textile on fabric were compared with the Lead II ECG signals and with respiration signals, which were simultaneously measured in every case with five subjects. The analysis result showed that the locations of the R-peak in the ECG signal were highly associated with sharp peaks in the signals obtained through the textile-based inductive sensor (r=0.9681). Based on the results, we determined the feasibility of the developed textile-based inductive sensor as a measurement device for the heart rate and respiration characteristics.

• 동력기계공학회지
• /
• 제8권3호
• /
• pp.52-57
• /
• 2004

A new non-destructive inspection technique has been developed. One characteristic of the technique is that defects are visualized by laser ray. Magnetic domains and domain walls of a magneto-optical sensor(MO sensor) are varied by the magnetic flux leaked by defects, and the variations are observed by the reflected light of the laser ray. The information of defect can remotely be inspected by this technique in a real time. This paper describes the results estimated on the 2-dimensional surface defects and opposite-side defects in a ferromagnetic material and the natural surface defect in a clutch disk wheel. The light region of a visible image and the magnitude of a reflected light increases as the input current of the magnetizer increases. The natural surface defect, that has not the width of crack's open mouth, can be also visualized like as 2-dimensional artificial defects.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권3호
• /
• pp.197-204
• /
• 2002

DRAM, SRAM, and FLASH memory are three major memory devices currently used in most electronic applications. But, they have very distinct attributes, therefore, each memory could be used only for limited applications. MRAM (Magneto-resistive Random Access Memory) is a promising candidate for a universal memory that meets all application needs with non-volatile, fast operational speed, and low power consumption. The simplest architecture of MRAM cell is a series of MTJ (Magnetic Tunnel Junction) as a data storage part and MOS transistor as a data selection part. To be a commercially competitive memory device, scalability is an important factor as well. This paper is testing the actual electrical parameters and the scaling factors to limit MRAM technology in the semiconductor based memory device by an actual integration of MRAM core cell. Electrical tuning of MOS/MTJ, and control of resistance are important factors for data sensing, and control of magnetic switching for data writing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.27-30
• /
• 1996

In this paper, we prove through the experiments the possibility that Co-amorphous magnetic films can be used as high sensibility materials. We fabricate amorphous film of Fe$\sub$4.7/Co$\sub$74.3/Si$_2$B$\sub$19/ by using sputtering method at high frequency. Then, we not only measure the magnetic Properties of the annealed samples, but also observe the magnetic domain by using an Kerr effect optical-microscope. As the result, we find that the samples have high sensibility

• 한국자기공명학회논문지
• /
• 제23권3호
• /
• pp.73-80
• /
• 2019

Nitrogen-vacancy (NV) is one of the most popular solid-state spin systems for quantum sensing. NV has been used for vector magnetometry with nanometer spatial resolution and sensors for nuclear magnetic resonance (NMR) in samples with small volume, less than 10 pL. Various studies are in progress to make NV a complementary sensor for current NMR technique. Fabricating and improving diamond itself are one of the research topics. This mini-review contains recent develops in diamond fabrication and treatment for higher NV yield. Additionally, we briefly introduce the development status of NV in NMR.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
• /
• pp.150-151
• /
• 2003

In the past years, a giant magnetoresistance (GMR) effect found in perovskite-like structured materials has attracted considerable attention among scientists and manufacturers, since, a practical point of view, the capacity of producing magnetic and sensing sensors. In a stream of this interest, further efforts to understand the underlying mechanism that leads to the GMR effect relative to the correlation between transport and magnetic properties, have been extensively devoted. In these cases, spin-glass-like behaviors are ascribed to the frustration of random competing exchange interactions, namely the ferromagnetic double-exchange interaction between Co$\^$3+/ (or Mn$\^$3+/) and Co$\^$4+/(or Mn$\^$4+/) and the antiferromagnetic one like spins. Noticeably, the distinction of spin-glass region from cluster-glass one, involved in the remarkable changes in transport and magnetic properties at a critical value of doping concentration, was observed. Magnetic anomalies in zero-field-cooled (ZFC) magnetization as well as ac magnetic susceptibility below Curie temperature T$\sub$c/ and the charge/orbital fluctuation were also realized. In this work, we present a study of magnetic properties of a deficient manganese perovskites system of La$\sub$0.6/Sr$\sub$x/MnTi$\sub$y/O$_3$, and particularly provide its new magnetic phase diagram.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.242-242
• /
• 2002

The Earth's magnetic field acquired from KOMPSAT-1's TAM (Three-Axis Magnetometer) between June 19th and 21st 2000 was analyzed. The TAM, one of the KOMPSAT-1's Attitude and Orbit Control Subsystems, plays an important role in determining and controlling the satellite's attitude. This also can provide new insight on the Earth's magnetic field. By transforming the satellite coordinate from ECI to ECEF, spherical coordinate of total magnetic field was achieved. These data were grouped into dusk (ascending) and dawn (descending) data sets, based on their local magnetic times. This partitioning is essential for performing 1-D WCA (Wavenumber Correlation Analysis). Also, this enhances the perception of external fields in the Kompsat-1's TAM magnetic maps that were compiled according to different local. The dusk and dawn data are processed independently and then merged to produce a total field magnetic anomaly map. To extract static and dynamic components, the 1-D and 2-D WCAs were applied to the sub-parallel neighboring tracks and dawn-dusk data sets. The static components were compared with the IGRF, the global spherical harmonic magnetic field model. The static and dynamic components were analyzed in terms of corefield, external, and crustal signals based on their origins.

• 한국자기학회지
• /
• 제15권6호
• /
• pp.325-331
• /
• 2005

자기누설탐상시스템은 지하에 매설된 배관에서 발생되는 부식이나 크랙 또는 기계적 변형을 탐지하기 위한 방법으로 비파괴검사 방법의 하나이다. 지하 매설 배관은 Nd 자석에 의해 착자가 되고, 배관에 부식이 발생했을 경우 배관의 단면적이 작아지게 되어 자기누설이 발생하며, 발생된 자기누설을 홀센서로 검출하여 부식의 유무, 크기, 모양 등을 판별하게 된다. 지하 매설 배관은 자기누설탐상시스템을 이용하여 정기적으로 검사하기 때문에 처음 검사하는 배관이 아닌 경우는 자기누설탐상시스템의 착자시스템에 의해서 검사 이후에 잔류자화가 존재하게 된다 이렇게 배관에 존재하는 잔류자화에 의해서 자기누설탐상시스템에 의한 착자 정도가 변화하게 되어 검출 신호에 영향을 준다. 검출된 결함신호에는 결함에 대한 정보뿐만 아니라 잔류자화에 대한 정보도 포함되어 있기 때문에 결함신호로부터 결함의 크기와 모양을 판정하기 위해서는 잔류자화에 대한 정보를 제거하거나 보정해주어야 한다. 따라서 본 논문에서는 배관의 잔류자화의 영향을 배관의 잔류자화 방향과 크기에 따라 해석하고, 실험을 통하여 확인하고 분석하였다. 또한 잔류자화에 의한 영향을 보정하기 위한 방법을 제시하였다.

• 비파괴검사학회지
• /
• 제21권2호
• /
• pp.197-203
• /
• 2001

항공기나 대형 플랜트 등의 경년구조물에 있어서 제조 및 설계 혹은 작업환경 등에 의해 발생하는 미소결함은 응력부식파괴로 이어지는 결정적인 원인으로 알려져 있다. 따라서 제조단계에서의 결함의 검출뿐만 아니라 운전개지 후에 있어서도 비파괴검사에 기초를 둔 정기적인 건전성평가가 요구된다. 특히 구조물내의 미소균열 평가는 구조건전성 평가에 있어서 중요한 과제라 할 수 있다. 자기광학소자를 이용한 비파괴탐상법은 균열부근의 누설자속에 의한 자구 및 자벽의 변화를 이용하여 균열정보를 화상형태로 얻는다. 그러므로 빠른 탐상속도와 결과데이터 해석의 용이 그리고 실시간적으로 탐상결과를 획득할 수 있다는 장점을 지니고 있다. 본 논문은 자기광학소자를 이용한 새로운 비파괴적 탐상법을 제안하고, 본 탐상법을 이용하여 구조물에 존재하는 표면결함의 검출가능성 및 균열깊이의 평가를 실증하였다. 표면결함을 갖는 시험편과 파이프의 내면에 존재하는 피로균열을 대상으로 실험을 실시한 결과, 표면결함의 위치 및 2차원적 형상을 화상형식으로 얻을 수 있음을 증명하였다. 또한 피로시험중의 시험편을 대상으로 균열발생 및 균열진전과정을 평가를 통하여 원격탐상의 가능성을 제시하였다.