• 한국자기학회지
• /
• 제18권1호
• /
• pp.9-13
• /
• 2008

에어로졸 성막법으로 제작된 Bi:YIG($Bi_{0.5}Y_{2.5}Fe_5O_{12}$) 막에 있어서, 에어로졸 입사각도가 광학적 특성과 자기적 특정에 미치는 영향에 대하여 조사하였다. 에어로졸입사각도를 0도에서 30도로 증가시킴으로써 입사광의 파장이 450 nm일 때 광투과율은 약 80%의 향상이 얻어졌다. 그 이유는 에어로졸 입사각도를 높임으로써 입자간 응집체 등에 의해서 생성되는 막표면 혹은 막내부의 결함을 줄일 수 있기 때문으로 고찰되었다. 또한, 에어로졸 입사각도를 높임으로써 Bi:YIG막의 보자력을 크게 줄일 수 있다는 것을 실험적으로 검증할 수 있었다. 그 이유로는 에어로졸 입사각도를 높임으로써 입자와 기판간의 충돌에너지의 변화와 자벽이동의 방해가 되는 결함의 감소가 정성적으로 예상되었다.

• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.216-220
• /
• 1996

In the present paper, a new type of DC arc plasma torch is disclosed. The principles of the new magnetic and fluid dynamic controlled large orifice long discharge tunnel plasma torch is discussed. Two series of DC Plasma Jet diamond film deposition equipment have been developed. The 20kW Jet equipped with a $\Phi$70 mm orifice torch is capable of deposition diamond films at a growth rate as high as 40$\mu\textrm{m}$/h over a substrate area of $\Phi$65 mm. The 100kW high power Jet which is newly developed based on the experience of the low power model is equipped with a $\Phi$120 mm orifice torch, and is capable of depositing diamond films over a substrate area of $\Phi$110 mm at growth rate as high as 40 $\mu\textrm{m}$/h, and can be operated at gas recycling mode, which allows 95% of the gases be recycled. It is demonstrated that the new type DC plasma torch can be easily scaled up to even higher power Jet. It is estimated that even by the 100kW Jet, the cost for tool grade diamond films can be as low as less than ＄4/carat.

• 한국자기학회지
• /
• 제16권1호
• /
• pp.1-5
• /
• 2006

결정구조는 같은 spinel 구조이나, 자기적으로는 각각 반강자성과 준강자성 특성을 띠고 있는 $Co_3O_4$와 자철광 $Fe_3O_4$의 혼성 Co-ferrite인 $Co_xFe_{1-x}O_4$ 박막을 sol-gel법으로 제조하여, Fe 이온에 대한 Co 이온 치환으로 발생된 양이온 거동이 Co-ferrite 박막의 결정구조 및 자기적 특성에 미치는 효과를 XRB 실험, VSM 측정, 그리고 Conversion Electron Mossbauer Spectroscopy (CEMS) 실험으로 조사하였다. 그 결과 $Co^{3+}$ 이온이 주로 $Fe^{3+}$ 이온을 치환하여 단위정의 크기가 감소를 가져오며, 결정구조는 inverse spinel 구조에서 normal spinel 구조로 변환된다. CEMS 분광실험을 통하여 확인된 Fe 이온의 site preference는 주로 $Fe^{3+}$ 이온이 $Co^{3+}$ 치환됨을 보여주고 있으며, 동시에 B-site의 $Co^{2+}$ 이온은 A-site로 이동된다. 자화곡선 측정결과 Co 조성값의 증가로 자기 moment값이 감소되는 것으로 나타났는데, 이것은 low spin상태의 $Co^{3+}$이 high spin상태의 $Fe^{3+}$이온을 치환하여 주로 발생한 것이다.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.35-39
• /
• 2016

$Cr_{100-x}Ti_x$ amorphous texture-inducing layers (TIL) were investigated to realize highly (002) oriented $L1_0$ FePt-C granular films through hetero-epitaxial growth on the (002) textured bcc-$Cr_{80}Mn_{20}$ seed layer (bcc-SL). As-deposited TILs showed the amorphous phase in Ti content of $30{\leq}x(at%){\leq}75$. Particularly, films with $40{\leq}x{\leq}60$ kept the amorphous phase against the heat treatment over $600^{\circ}C$. It was found that preference of the crystallographic texture for bcc-SLs is directly affected by the structural phase of TILs. (002) crystallographic texture was realized in bcc-SLs deposited on the amorphous TILs ($40{\leq}x{\leq}70$), whereas (110) texture was formed in bcc-SLs overlying on crystalline TILs (x < 30 and x > 70). Correlation between the angular distribution of (002) crystal orientation of bcc-SL evaluated by full width at half maximum of (002) diffraction (FWHM) and a grain diameter of bcc-SL indicated that while the development of the lateral growth for bcc-SL grain reduces FWHM, crystallization of amorphous TILs hinders FWHM. $L1_0$ FePt-C granular films were fabricated under the substrate heating process over $600^{\circ}C$ with having different FWHM of bcc-SL. Hysteresis loops showed that squareness ($M_r/M_s$) of the films increased from 0.87 to 0.95 when FWHM of bcc-SL decreased from $13.7^{\circ}$ to $3.8^{\circ}$. It is suggested that the reduction of (002) FWHM affects to the overlying MgO film as well as FePt-C granular film by means of the hetero-epitaxial growth.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.111-112
• /
• 2009

Diamond-like carbon (DLC) is a convenient term to indicate the compositions of the various forms of amorphous carbon (a-C), tetrahedral amorphous carbon (ta-C), hydrogenated amorphous carbon and tetrahedral amorphous carbon (a-C:H and ta-C:H). The a-C film with disordered graphitic ordering, such as soot, chars, glassy carbon, and evaporated a-C, is shown in the lower left hand corner. If the fraction of sp3 bonding reaches a high degree, such an a-C is denoted as tetrahedral amorphous carbon (ta-C), in order to distinguish it from sp2 a-C [2]. Two hydrocarbon polymers, that is, polyethylene (CH2)n and polyacetylene (CH)n, define the limits of the triangle in the right hand corner beyond which interconnecting C-C networks do not form, and only strait-chain molecules are formed. The DLC films, i.e. a-C, ta-C, a-C:H and ta-C:H, have some extreme properties similar to diamond, such as hardness, elastic modulus and chemical inertness. These films are great advantages for many applications. One of the most important applications of the carbon-based films is the coating for magnetic hard disk recording. The second successful application is wear protective and antireflective films for IR windows. The third application is wear protection of bearings and sliding friction parts. The fourth is precision gages for the automotive industry. Recently, exciting ongoing study [1] tries to deposit a carbon-based protective film on engine parts (e.g. engine cylinders and pistons) taking into account not only low friction and wear, but also self lubricating properties. Reduction of the oil consumption is expected. Currently, for an additional application field, the carbon-based films are extensively studied as excellent candidates for biocompatible films on biomedical implants. The carbon-based films consist of carbon, hydrogen and nitrogen, which are biologically harmless as well as the main elements of human body. Some in vitro and limited in vivo studies on the biological effects of carbon-based films have been studied [$2{\sim}5$].The carbon-based films have great potentials in many fields. However, a few technological issues for carbon-based film are still needed to be studied to improve the applicability. Aisenberg and Chabot [3] firstly prepared an amorphous carbon film on substrates remained at room temperature using a beam of carbon ions produced using argon plasma. Spencer et al. [4] had subsequently developed this field. Many deposition techniques for DLC films have been developed to increase the fraction of sp3 bonding in the films. The a-C films have been prepared by a variety of deposition methods such as ion plating, DC or RF sputtering, RF or DC plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance chemical vapor deposition (ECR-CVD), ion implantation, ablation, pulsed laser deposition and cathodic arc deposition, from a variety of carbon target or gaseous sources materials [5]. Sputtering is the most common deposition method for a-C film. Deposited films by these plasma methods, such as plasma enhanced chemical vapor deposition (PECVD) [6], are ranged into the interior of the triangle. Application fields of DLC films investigated from papers. Many papers purposed to apply for tribology due to the carbon-based films of low friction and wear resistance. Figure 1 shows the percentage of DLC research interest for application field. The biggest portion is tribology field. It is occupied 57%. Second, biomedical field hold 14%. Nowadays, biomedical field is took notice in many countries and significantly increased the research papers. DLC films actually applied to many industries in 2005 as shown figure 2. The most applied fields are mold and machinery industries. It took over 50%. The automobile industry is more and more increase application parts. In the near future, automobile industry is expected a big market for DLC coating. Figure 1 Research interests of carbon-based filmsFigure 2 Demand ratio of DLC coating for industry in 2005. In this presentation, I will introduce a trend of carbon-based coating research and applications.

• 한국자기학회지
• /
• 제24권4호
• /
• pp.101-106
• /
• 2014

Dc 마그네트론 스퍼터링법으로 자기저항비 5.0 %와 자장감응도 1.5 %/Oe를 갖는 glass/Ta(5.8 nm)/NiFe(5 nm)/Cu(2.3 nm)/NiFe(3 nm)/IrMn(12 nm)/Ta(5.8 nm) 다층구조 GMR-SV 박막을 증착하였다. 광 리소그래피 공정으로 적혈구 직경 크기인 $7{\mu}m{\sim}8{\mu}m$ 이내의 선폭인 GMR-SV 소자를 제작하였다. 직경 $1{\mu}m$ 크기인 여러 개의 자성비드가 결합된 적혈구를 자기저항비 1.06 % 자장감응도 0.3 %/Oe를 갖는 GMR-SV 소자에 떨어뜨려 -0.6 Oe 부근에서 약 $0.4{\Omega}$과 약 0.15 %의 변화를 관찰하였다. 본 연구로부터 미크론 크기의 선폭을 갖는 GMR-SV 소자가 자성비드를 결합한 적혈구내 헤모글로빈의 새로운 자성 특성을 분석하는 바이오센서로 활용할 수 있음을 보여주었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.218-218
• /
• 2012

Recently, hexagonal manganites have attracted much attention because of the coexistence of ferroelectricity and antiferromagnetic (AFM) order. The crystal structure of hexagonal manganites consists of $MnO_5$ polyhedra in which $Mn^{3+}$ ion is surrounded by three oxygen atoms in plane and two apical oxygen ions. The Mn ions within Mn-O plane form a triangular lattice and couple the spins through the AFM superexchange interaction. Due to incomplete AFM coupling between neighboring Mn ions in the triangular lattice, the system forms a geometrically-frustrated magnetic state. Among hexagonal manganites, $YMnO_3$, in particular, is the best known experimentally since the f states are empty. In addition, for applications, $YMnO_3$ thin films have been known as promising candidates for non-volatile ferroelectric random access memories. However, $YMnO_3$ has low magnetic order temperature (~70 K) and A-type AFM structure, which hinders its applications. We have synthesized $YMn1_{-x}Cr_xO_3$ (x = 0, 0.05 and 0.1) samples by the conventional solid-state reaction. The powders of stoichiometric proportions were mixed, and calcined at $900^{\circ}C$ for $YMn1_{-x}Cr_xO_3$ for 24 h. The obtained powders were ground, and pressed into 5-mm-thick disks of 1/2-inch diameter. The disks were directly put into the oven, and heated up to $1,300^{\circ}C$ and sintered in air for 24 h. The phase of samples was checked at room temperature by powder x-ray diffraction using a Rigaku Miniflex diffractometer with Cu $K{\alpha}$ radiation. All the magnetization measurements were carried out with a superconducting quantum-interference-device magnetometer. Our experiments point out that the Cr-doped samples show the characteristics of a spin-glass state at low temperatures.

• 한국진공학회지
• /
• 제21권5호
• /
• pp.258-263
• /
• 2012

펄스레이저 증착법으로 P형 실리콘(100) 기판위에 증착한 Fe 희석된 Si 합금의 구조와 전기적 및 자기적 물성을 연구하였다. 합금시료에 대한 X-선 회절패턴에서 육방정계에 해당하는 FeSi, $Fe_3Si$, 및 $Fe_5Si_3$와 관련된 여러 개의 회절신호가 관측되었으며, 에너지분산분광 측정에 의한 시료내 Fe 원자의 함량은 1.25~6.49 atm, %로 나타났다. 또한, 온도변화에 따른 전기비저항 값의 측정으로부터 5.21 meV와 7.79 meV 두 개의 활성화에너지를 얻을 수 있었다. 절대온도 10 K에서 측정한 최대 자화는 약 100 emu/cc로 나타났으며, 3,000 Oe의 외부자기장하에서 온도의 함수로 측정한 자화 값으로부터 시료의 강자성 특성은 350 K까지도 유지됨을 알 수 있었다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
• /
• pp.60-61
• /
• 2003

Theoretical considerations on a giant magneto-impedance (GMI) effect in amorphous ribbons (i.e., thin films) have been made in terms of the expressions of effective permeability and impedance derived in the frame of classical electrodynamics and ferromagnetism. The dependence of GMI effect on the external do magnetic field (H$\_$ext/) and the frequency of alternating current are simulated and discussed in the knowledge of energy conversion consisting of the current energy loss, the ferromagnetic energy consumption, and the magnetic energy storage in the film. The obtained results are summarized as follow: (a) As frequency f< 20 ㎒, the real part of effective permeability (${\mu}$′) changes slightly. The peak of the ${\mu}$′curve always locates at H$\_$ext/=H$\_$ani/ - the anisotropy field. However, the peak value of ${\mu}$′ tends to increase with increasing frequency in the frequency range of 11-20 ㎒. (b) In the frequency range, f= 21-23 ㎒, a negative peak additionally appears. Meanwhile, both the positive and negative peak values rapidly increase with increasing frequency and their peak positions shift towards a high H$\_$ext/. (c) The positive peak value of ${\mu}$′ starts to decrease at f= 29 ㎒ and its negative peak does so at about 35 ㎒. Then, both peaks keep such a tendency and their peak positions move to high H$\_$ext/, as increasing frequency. (d) The dependence of the imaginary part of effective permeability (${\mu}$") on the external dc magnetic field and the frequency of the alternating field indicates that there is only one peak involved in ${\mu}$" for the whole frequency range. (e) The impedance vs. magnetic field curves at various frequencies show that there is a critical value of frequency around f= 18-19 ㎒ where the transition between two frequency regimes occurs; the one (low frequency) in which ${\mu}$′ predominantly contributes to the GMI effect and the other (high frequency) in which ${\mu}$" determines the GMI effect.

• 한국의학물리학회지:의학물리
• /
• 제18권4호
• /
• pp.209-213
• /
• 2007

20 MeV 전자선의 팬텀 내에서의 선량분포에 대한 횡방향 자기장 효과를 조사하기 위하여 전자석을 제작하여 자기장 인가 여부에 따른 등선량곡선 및 깊이선량율을 X-OMAT 필름으로 측정하였다. 1.5 Tesla의 자기장중심을 팬텀 표면으로부터 7.5 cm 깊이에 위치시킨 경우 팬텀 표면으로부터 4.5 cm 깊이에서 약 30%의 선량증가를 보이는 등 이론적으로 알려진 결과들과 잘 부합하고 있음을 확인하였다.