DOI QR코드

DOI QR Code

Aerosol Incident Angle Dependence of Optical and Magnetic Properties of Bi:YIG Films Deposited with Aerosol Deposition Method

에어로졸성막법으로 성막한 Bi:YIG 막의 광학적/자기적특성에 미치는 에어로졸 입사각도의 영향

  • Shin, Kwang-Ho (Department of Multimedia Communication, Kyungsung University)
  • 신광호 (경성대학교 멀티미디어통신공학과)
  • Published : 2008.02.29

Abstract

Bismuth-substituted yttrium iron garnet($Bi_{0.5}Y_{2.5}Fe_5O_{12}$) films were deposited with the aerosol deposition method and their magnetic and optical properties were investigated as a function of the aerosol incident angle. The optical transmittance of Bi:YIG increased about 80% with increasing the aerosol incident angle from 0 degree to 30 degree, due to decrease of the defects which were formed from agglutinations of the Bi:YIG particles inside and/or surface of the film. The coercive force also decreased largely with increasing the aerosol incident angle due to the reduction of the collision energy between the particles and the substrate and the decrease of the defects.

에어로졸 성막법으로 제작된 Bi:YIG($Bi_{0.5}Y_{2.5}Fe_5O_{12}$) 막에 있어서, 에어로졸 입사각도가 광학적 특성과 자기적 특정에 미치는 영향에 대하여 조사하였다. 에어로졸입사각도를 0도에서 30도로 증가시킴으로써 입사광의 파장이 450 nm일 때 광투과율은 약 80%의 향상이 얻어졌다. 그 이유는 에어로졸 입사각도를 높임으로써 입자간 응집체 등에 의해서 생성되는 막표면 혹은 막내부의 결함을 줄일 수 있기 때문으로 고찰되었다. 또한, 에어로졸 입사각도를 높임으로써 Bi:YIG막의 보자력을 크게 줄일 수 있다는 것을 실험적으로 검증할 수 있었다. 그 이유로는 에어로졸 입사각도를 높임으로써 입자와 기판간의 충돌에너지의 변화와 자벽이동의 방해가 되는 결함의 감소가 정성적으로 예상되었다.

Keywords

References

  1. H. Takeuchi, Jpn. J. Appl. Phys., 14, 1903 (1975) https://doi.org/10.1143/JJAP.14.1903
  2. S. Wittekoek, T. Popma, J. Robertson, and P. Bongers, Phys. Rev., B12, 2777 (1975)
  3. T. Takayama, K. Nakamura, M. Yayoi, M. Inoue, T. Fujii, M. Abe, and K. Arai, J. Magn. Soc. Jpn., 24, 391 (2000) https://doi.org/10.3379/jmsjmag.24.391
  4. D. S. Todorovsky, R. V. Todorovska, and St. Groudeva-Zotova, Materials Letter, 55, 41 (2002) https://doi.org/10.1016/S0167-577X(01)00616-4
  5. J. Akedo and M. Lebedev, Appl. Phys. Lett., 77, 1710 (2000) https://doi.org/10.1063/1.1309029
  6. J. Akedo, N. Minami, K. Fukuda, M. Ichiki, and R. Maeda, Ferroelectrics, 231, 285 (1999) https://doi.org/10.1080/00150199908014545
  7. M. Lebedev, J. Akedo, K. Mori, and T. Eiju, J. Vac. Sci. Technol. A, 18, 563 (2000) https://doi.org/10.1116/1.582226
  8. http://www.corning.com/
  9. H. Masuda, K. Higashitani, and H. Yoshida, Powder Technology Handbook, 183 (2006)