• 한국자기공명학회논문지
• /
• 제23권1호
• /
• pp.12-19
• /
• 2019

A former study has shown that the spin-lattice relaxation time ($T_1$) in cancerous prostate tissue had enhanced contrast at an ultra-low magnetic field, $132{\mu}T$. To study the field dependence and the origin of the contrast we measured $T_1$ in pairs of ex-vivo prostate tissues at the Earth's magnetic field. A portable and coil-based nuclear magnetic resonance (NMR) system was adopted for $T_1$ measurements at $40{\mu}T$. The $T_1$ contrast, ${\delta}=1-T_1$ (more cancer)/$T_1$(less cancer), was calculated from each pair. Additionally, we performed pathological examinations such as Gleason's score, cell proliferation index, and micro-vessel density (MVD), to quantify correlations between the pathological parameters and $T_1$ of the cancerous prostate tissues.

• 조명전기설비학회논문지
• /
• 제25권4호
• /
• pp.111-116
• /
• 2011

This paper deals with the electromagnetic clutch which stop the generator at emergency by using the engine power of generator. The electromagnetic field was analyzed using Flux-2d program with different conditions : voltage, air gap, coil locations. As a result, the maximum magnetic flux density of electromagnetic clutch occurred between the coil and wheel : 0.27[T], 0.41[T] at 12[V], 24[V]. The maximum flux density was at the center location of the coil.

• 한국초전도ㆍ저온공학회논문지
• /
• 제2권1호
• /
• pp.14-18
• /
• 2000

This paper describes a series of experiments to investigate the operational characteristics of a superconducting power supply with superconducting excitation coil. In this experiment, the superconducting excitation coil is introduced to control the pole-flex in the air gap of the machine. The operating current of the superconducting powder supply is designed to have the value of 300 [A] for the rotational speed of 600 rpm. Sensors installed on the Nb sheet yield the information on the spatial and temporal behaviors of the magnetic field in spot and on the characteristics of the superconducting power supply.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.260-263
• /
• 1997

In this paper, we describe the mechanical strain effects on the critical current density of HTS (BSCCO) pancake-type-magnet. Firstly the strain of pancake coil is calculated in terms of coil length, which is also a function of angle, and then the critical current density degradation due to strain is calculated along the coil. We assumed that the critical current density degradation pattern is same with that of $Nb_{3}Sn$. We also modelled the effects of magnetic field on the critical curent degradation, and the results are compared with those with null magnetic field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.590-593
• /
• 2000

The analysis of current distribution in a solidly modeled coil is very important for accurate analysis of electric machines such as deflection yoke(DY). In general, Modeling every coils is impossible for analyzing magnetic field using the 3-D FEM, so solidly modeled coil is usually used. Some methods have been developed for analyzing current distribution, but these methods have fatal disadvantage that they cannot be applied to an arbitrary shaped coil and that they yield numerical errors. In this paper. a novel method for resolving the problems mentioned above is proposed. The new method is verified by the application to a DY and it shows improved results.

• 한국자기학회지
• /
• 제14권6호
• /
• pp.232-235
• /
• 2004

아날로그 형태의 신호를 전송하기에 적합한 특성을 보이는 선형 GMR(giant magnetoresistance) 아이솔레이터를 모델링하여 입력전류에 따른 출력전압과 전류를 조사하였다. GMR 아이솔레이터를 자기적 부분과 전기적 부분으로 나누고 선택된 스핀밸브 소자의 MR(magnetoresistance) 결과를 대입하여 출력전압을 구할 수 있는 순서도를 설정하였다. 자기적 모델링으로는 평판 코일의 3차원 모델을 FEM방법으로 해석하여 입력전류에 의해 생성되는 자장의 세기를 구하였으며, 여기에서 자기코어층이 있는 경우 50% 이상 더 커지는 결과를 얻었다. 그리고 아이솔레이터의 출력전압파형을 계산한 결과 입력 코일 전류에 따른 궤환 코일 전류가 $I_{out}$ = $I_{in}$ -5 mA의 선형함수와 비교시 평균 $\pm$0.25 mA 이내의 차이로 근사한 값으로 계산되었다. 또한 입력되는 코일 전류가 구형파일 때, 출력전압의 반응시간과 파형을 계산하였으며, 이때 최저전압에서 최대 전압까지 상승 및 하강하는 시간은 연산증폭 기의 slew rate가 0.3 V/${\mu}\textrm{s}$ 일 때, 최저전압에서 최대 전압까지 상승 및 하강하는 시간은 6 ${\mu}\textrm{s}$였다.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.380-384
• /
• 2010

A micromirror for a laser display system actuated by the electromagnetic force induced by the surface coil and the permanent magnet was designed and analyzed through the coupled physics analyses incorporating the electromagnetics, mechanics, and electrothermal analysis because the mechanical rotation of the micromirror is driven by the electromagnetic driving force. The proposed micromirror has two torsion beams to sustain the mirror plate which has surface coils on the top and the two permanent magnets exists on both sides of the micromirror for an external magnetic field source. The designed micromirror has the resonant frequency of 3.82kHz. When the magnetic field of the permanent magnet is 0.4T, the coil has 4 turns, and the current density of coil is 3.6A/$mm^2$, the estimated z axis displacement of the mirror plate edge is 0.23mm which corresponds to the rotation angle of $14.2^{\circ}$. When considering the joule heating in the current-carrying coil, the maximum temperature of the mirror plate is obtained as 300.045K, which induces the negligible changes in the rotation angle and the resistance of the coil.

• Journal of Welding and Joining
• /
• 제19권4호
• /
• pp.391-398
• /
• 2001

MIAB welding method uses a rotating arc as its heat source and is known to be efficient in pipe butt welding. The arc is rotated around the weld line by the electro-magnetic force resulting from the interaction of arc current and magnetic field. This paper is concerned with the experiment of initial stage for process control, monitoring for weld quality, and the design of coil system which is efficient of flux generation and concentration. A coil system for the generation of magnetic flux was designed and constructed. Magnetic flux density and arc rotating behavior are important factors in MIAB welding, so the relations between these factors and process parameters were investigated. Various experiments were performed for the steel pipes(48.1mm O.D and 2.0mm thickness). The magnetic flux density is increased by increasing exciting current and decreasing gap size. The maximum of arc rotating frequency is affected by exciting current and gap size. However, the variations of arc rotating frequency during welding and then the melting process are mainly influenced by welding current. Thus, it is considered that the results of this study can be used as important data on the monitoring for weld quality and the design of efficient coil system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.872-873
• /
• 2011

This paper presents a multi-domain topology optimization using the harmonically excited coil and the iron in order to focus pulsed magnetic field (PMF). The design sensitivity of the harmonic magnetic field is derived by adjoint variable method. As a result of the optimization, PMF is considerably concentrated on the objective domain with much less leakage than the initial model.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.53-53
• /
• 2004