• Korean Journal of Community Nutrition
• /
• v.19 no.2
• /
• pp.176-186
• /
• 2014

Objectives: Epidemiological studies have suggested that a higher consumption of whole grain foods can significantly reduce the risk of chronic diseases including cardiovascular diseases, type 2 diabetes and obesity. The objective of the current study was to examine associations among the consumption of whole grains and nutrient intakes and biochemical indicators associated with chronic diseases among generally healthy middle-aged Korean women. Methods: Using 24-hour recall data from the 2008-2009 National Health and Nutrition Examination Surveys, whole grain intake (g/day) was calculated for a total of generally healthy 1,953 subjects. The subjects were divided into three groups by the level of whole grain consumption (0 g/day, > 0 and < 20 g/day or ${\geq}20g/day$). Mean values or proportions of various nutrient intakes and metabolic risk factors were compared according to the level of whole grain consumption. All statistical analysis was conducted using SAS software version 9.2. Results: We observed that the overall consumption of whole grains was quite low. Specifically, 58.2% of subjects reported no whole grain consumption on the day of the survey, and the mean whole grain intake was only 15.3 g/day. The whole grain consumption was positively associated with intakes of various macro and micronutrients, namely, plant proteins and fats, dietary fiber, calcium, plant iron, potassium, zinc, vitamin A, ${\beta}$-carotene, thiamin, riboflavin, niacin, vitamin $B_6$ and folic acid. In addition, we found significantly decreasing trends in abdominal obesity and hypertriglyceridemia as whole grain intake levels increase. Conclusions: The study findings suggested the importance of promoting whole grain consumption as an efficient tool for improving various dietary aspects and preventing chronic diseases.

• Smart Structures and Systems
• /
• v.26 no.6
• /
• pp.681-692
• /
• 2020

Conventional Piezoelectric Energy Harvesters (CPEH) have been extensively studied for maximizing their electrical output through material selection, geometric and structural optimization, and adoption of efficient interface circuits. In this paper, the performance of Stepped Piezoelectric Energy Harvester (SPEH) under harmonic base excitation is studied analytically, numerically and experimentally. The motivation is to compare the energy harvesting performance of CPEH and SPEHs with the same characteristics (resonant frequency). The results of this study challenge the notion of achieving higher voltage and power output through incorporation of geometric discontinuities such as step sections in the harvester beams. A CPEH consists of substrate material with a patch of piezoelectric material bonded over it and a tip mass at the free end to tune the resonant frequency. A SPEH is designed by introducing a step section near the root of substrate beam to induce higher dynamic strain for maximizing the electrical output. The incorporation of step section reduces the stiffness and consequently, a lower tip mass is used with SPEH to match the resonant frequency to that of CPEH. Moreover, the electromechanical coupling coefficient, forcing function and damping are significantly influenced because of the inclusion of step section, which consequently affects harvester's output. Three different configurations of SPEHs characterized by the same resonant frequency as that of CPEH are designed and analyzed using linear electromechanical model and their performances are compared. The variation of strain on the harvester beams is obtained using finite element analysis. The prototypes of CPEH and SPEHs are fabricated and experimentally tested. It is shown that the power output from SPEHs is lower than the CPEH. When the prototypes with resonant frequencies in the range of 56-56.5 Hz are tested at 1 m/s2, three SPEHs generate power output of 482 μW, 424 μW and 228 μW when compared with 674 μW from CPEH. It is concluded that the advantage of increasing dynamic strain using step section is negated by increase in damping and decrease in forcing function. However, SPEHs show slightly better performance in terms of specific power and thus making them suitable for practical scenarios where the ratio of power to system mass is critical.

• Composites Research
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2006

Prediction of damage caused by low-velocity impact in laminated composite plate is an important problem faced by designers using composites. Not only the inplane stresses but also the interlaminar normal and shear stresses playa role in estimating the damage caused. But it is well known that the conventional approach based on the homogenization has the limit in description of damage. The work reported here is an effort in getting better predictions of dynamic behavior and damage in composite plate using DNS approach. In the DNS model, we discretize the composite plates through separate modeling of fiber and matrix for the local microscopic analysis. In the view of microscopic mechanics with DNS model, interlaminar stress behaviors in the inside of composite materials are investigated and compared with the results of the homogenized model which has been used in the conventional approach to impact analysis. Also the multiscale model based on DNS concept is developed in order to enhance the effectiveness of impact analysis, and we present the results of multiscale analysis considering micro and macro structures simultaneously.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.7
• /
• pp.1067-1075
• /
• 2007

Twenty eight 3-4 month old castrated Black Bengal kids (Capra hircus) were used to determine the effects of source and level of dietary copper (Cu) concentration on their performance and nutrient utilization. Cu was supplemented (0, 10, 20 and 30 mg/kg diet DM) as copper sulfate ($CuSO_4$, $5H_2O$) or copper proteinate (Cu-P). Kids were fed a basal diet containing maize (19.5%), soybean (17.0%), deoiled rice bran (56.5%), molasses (4.0%), di-calcium phosphate and salt (1.0% each) and mineral and vitamin mixture (0.5% each) supplements at 3.5% of body weight to meet NRC (1981) requirements for protein, energy, macro minerals and micro minerals, excluding Cu. The basal diet contained 5.7 mg Cu/kg, 122.5 mg Fe/kg, 110 mg Zn/kg, 0.26 mg Mo/kg and 0.32% S. $CuSO_4$ or Cu-P was added to the basal diet at the rate of 10, 20 and 30 mg/kg. Kids were housed in a well ventilated shed with facilities for individual feeding in aluminum plated metabolic cages. Blood samples were collected from the jugular vein on d 0, 30, 60 and 90 to determine hemoglobin (Hb), packed cell volume (PCV), total erythrocyte count (TEC), total leukocyte count (TLC) and serum enzymes (alkaline phosphatase, alanine transferase and aspertate transferase). A metabolism trial of 6 days duration was conducted after 90 days of experimental feeding. Statistical analysis revealed that source and level of Cu supplementation improved live weight gain (p<0.04) and average daily gain (p<0.01). No significant contribution of source and level of Cu to alter serum serum enzymes was evident. Goats fed Cu-P tended to have higher Hb, PCV and TEC than with $CuSO_4$ supplementation. Cu-P increased digestibility of ether extract (EE, p<0.02) and crude fiber (p<0.05) and showed an increasing trend (p<0.09) for digested crude protein (CP) and crude fiber (CF). Supplemental dose of Cu linearly improved (p<0.02) digestibilities of dry matter (DM), organic matter (OM), EE and nitrogen free extract (NFE). Though the absorption of nitrogen (N) was not affected (p>0.10) by both source and dose of Cu, N retention was affected (p<0.04) and there was a significant $Source{\times}Dose$ interaction (p<0.05). Final body weight (BW) was not influenced (p>0.10) by the source of Cu but increasing dose of Cu increased (p<0.04) the BW of kids. TDN intake (g/kg $W^{0.75}$) was higher (p<0.05) with the increased dose of Cu and there was a significant $Source{\times}Dose$ interaction. It was concluded that supplementation of Cu from different sources and varying dose level in a concentrate based diet may improve performance, nutrient utilization and plane of nutrition in castrated Black Bengal kids. The effects on performance and nutrient utilization are more pronounced with Cu-P than $CuSO_4$ supplementation. Higher dose of Cu showed better result than lower dose.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.13-21
• /
• 2016

PURPOSES : In this study, we analyzed the compressive strength characteristics of lean base concrete in relation to changes in the outdoor temperature after analyzing the cold and hot weather temperature standards and calculated the minimum and maximum temperatures when pouring concrete. We examined the rate of strength development of lean base concrete in relation to the temperature change and derived an appropriate analysis formula for FRC base structures by assigning the accumulated strength data and existing maturity formula. METHODS : We measured the strength changes at three curing temperatures (5, 20, and $35^{\circ}C$) by curing the concrete in a temperature range that covered the lowest temperature of the cold period, $5^{\circ}C$, to the highest temperature of the hot period, $35^{\circ}C$. We assigned the general lean concrete and FRC as test variables. A strength test was planned to measure the strength after 3, 5, 7, 14, and 28 days. RESULTS : According to the results of compressive strength tests of plain concrete and FRC in relation to curing temperature, the plain concrete had a compressive strength greater than 5 MPa at all curing temperatures on day 5 and satisfied the lean concrete standard. In the case of FRC, because the initial strength was substantially reduced as a result of a 30% substitution of fly ash, it did not satisfy the strength standard of 5 MPa when it was cured at $5^{\circ}C$ on day 7. In addition, because the fly ash in the FRC caused a Pozzolanic reaction with the progress into late age, the amount of strength development increased. In the case of a curing temperature of $20^{\circ}C$, the FRC strength was about 66% on day 3 compared with the plain concrete, but it is increased to about 77% on day 28. In the case of a curing temperature of $35^{\circ}C$, the FRC strength development rate was about 63% on day 3 compared with the plain concrete, but it increased to about 88% on day 28. CONCLUSIONS : We derived a strength analysis formula using the maturity temperatures with all the strength data and presented the point in time when it reached the base concrete standard, which was 5 MPa for each air temperature. We believe that our findings could be utilized as a reference in the construction of base concrete for a site during a cold or hot weather period.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1915-1926
• /
• 2008

Although we know that images of a country or an industry are influential factors in product evaluation, there has been little discussion about the channels through which consumers form a country or an industry image. Guided by the assumption that the image of the Korean fashion industry conveyed through U.S. media will likely affect the evaluation of Korean fashion products, we decided to examine articles published between January 1998 and June 2008 in Woman's Wear Daily(WWD), a prestigious U.S. daily trade newspaper covering all aspects of the national and international fashion business. By using the "Korean", we found 329 relevant articles. Through content analysis, we identified the aspects of the Korean fashion industry that have been considered salient to U.S. fashion media professionals. We set up categories based on the contents of the articles that discussed segments of the supply chain of the fashion industry. We found more comments on the Korean fashion industry as fiber and fabrics supplier or apparel manufacturer than in any other categories, which reflects that South Korea has been traditionally one of the most attractive sourcing countries for the U.S. fashion business. We identified significantly less coverage on the designing, branding, marketing, and retailing aspects of the Korean fashion industry. Due to economic boom in Korea, the country's fashion industry is recognized as having a highly fashion-conscious market that can afford the world's premium brands. However, the industry is viewed as being rather vulnerable to changes in the macro economic environment.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.84-90
• /
• 2001

To investigate morphological characteristics of zephyr produced from two bamboo species, Phyllostachys nigra var. henonis and Gigantochloa apus, basic anatomic properties were examined by scanning electron microscopy and image analysis. According to SEM observation, zephyr from Phyllostachys nigra var. henonis was not of uniform in shape and showed macro crack between vascular bundle sheaths. This may be attributes to the sclerenchymatous fibers connected closely, thus resulting in difficult separation of intercellular layer. Zephyr from Gigantochloa apus was of uniform in shape, which may be caused by easy separation of intercellular layer of sclerenchymatous fibers having thin cell wall and large cell lumen. By image analysis in cross section of two species, the ratio of vascular bundle sheaths and cell wall ratio of sclerenchymatous fibers were examined. The ratio of vascular bundle sheaths in Phyllostachys nigra var. henonis was lower than that in Gigantochloa apus. However, cell wall ratio of sclerenchymatous fibers in Phyllostachys nigra var. henonis was higher than that in Gigantochloa apus.

• Horticultural Science & Technology
• /
• v.35 no.3
• /
• pp.289-299
• /
• 2017

The objective of this study was to determine the effect of replacing perlite (PL) with pellets processed with poultry feather fiber as an inert material to prepare growing medium. The growth and flowering of Salvia splendens 'Vista Red' grown in individual growing medium $Biosangto^{(R)}$, peat moss (PM), PL, and two pellets (P45-1 and P45-2) were evaluated. Peat moss was mixed with PL, P45-1, or P45-2 at various ratios (1:0 to 1:3 or 3:1 by volume) to investigate the feasibility of replacing PL with pellets. Nutrient composition of the growing medium and leaf tissues was analyzed. The number of florets, inflorescence length, plant height, and fresh weight of plants grown in media containing P45-1 or P45-2 were reduced compared to those grown in individual growing medium PM or PL. As the mixing ratio of P45-1 or P45-2 to PM was higher, the growth of salvia, such as inflorescence length, plant height, number of leaves, and fresh weight was inhibited. Our results indicate that mixing three parts PM with one part of P45-1 (PM/P45-1/3:1) or P45-2 (PM/P45-2/3:1) accelerated flowering and increased the number of florets and leaves compared to other mixing ratios of PM and pellets media. The concentrations of phosphorus (P), calcium (Ca), boron (B), iron (Fe), and copper (Cu) in individual growing medium PL, P45-1, and P45-2 were significantly lower than those in PM. The concentration of N was the highest in leaves of plants grown in P45-1 or P45-2 amended media, and the concentrations of P, Ca, and zinc (Zn) in leaves were lower in individual growing medium P45-1 or P45-2 than in PM and PL. The pH of PM/P45-1/3:1 or PM/P45-2/3:1 media was maintained at optimal level (5.8-5.9) and the concentrations of macro- and micro-elements in the media and leaves were considered to be optimal levels. Therefore, mixing three parts PM with one part P45-1(PM:P45-1/3:1) or P45-2 (PM:P45-2/3:1) is recommended for improved growth and flowering in salvia. This suggests that P45-1 or P45-2 can replace PL as an inert material to prepare growing medium.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.213-229
• /
• 2013

Purpose: The Nutrient intake during the growth period is a critical factor for the development of the vision. In this study, we have analyzed the nutrient that has a correlation with the decrease of induced visual impairment. In addition, we investigated visual acuity and correlation of the nutrient in the higher-income youth and low-income youth. Methods: We used the Korean National Health and Nutrition Examination Survey 2010 document. The Korean National Health and Nutrition Examination Survey didn't show the clear standard of carbohydrates and fats, so we used the data from the Ministry of Food and Drug Safety standards with each 330 g, 51 g. In order to compare the correlation of nutrients and refraction, Nutrients has been classified macronutrients(energy, dietary fiber, protein, carbohydrate, fat), fat-soluble vitamins (vitamin A), water-soluble vitamins (vitamin C, riboflavin, niacin), trace minerals (iron), minerals (calcium, phosphorus, sodium, potassium) and water. Results: We investigated the correlation between refraction and nutrients on average about 328 subjects belonging to the high-income group. The fat intake was $54.21{\pm}32.60$ g, and it was about 2~10 times less than the recommended daily intake (112-540 g). Refractive power and fat intake showed a statistically significant correlation (O.D:p=0.033, O.S:p=0.029). We investigated the correlation between refraction and nutrients on average about 309 subjects belonging to the lowincome group. The phosphorus showed higher ingested by the $1118.75{\pm}501.98$ mg, and the sodium showed intake more than three times recommended intake by the $3705.24{\pm}2089.42$ mg. In addition, unlike other macro mineral it showed that was a correlation on the refraction by the 0.031. Conclusions: A broad variety of taking nutrition and good eating habits at the time of growth seems to have an effects to the good growth and vision and the senescence inhibition of vision.ave an effect to the good growth, the good vision and the senescence inhibition of vision.

• Journal of Life Science
• /
• v.34 no.3
• /
• pp.191-198
• /
• 2024

To verify the nutritional value and safety of larvae fed with a soymilk residue-added food source, we compared and analyzed the nutritional components of and harmful substances in Tenebrio molitor larvae reared on wheat bran. Crude protein content based on dry weight was 1.2 times higher in the 10% soymilk residue-fed group (SR) (54.0%) than in the wheat bran-fed group (WB) (43.5%). Dietary fiber also tended to be 1.9 times more in the SR (4.9%) than the WB (2.5%). Among unsaturated fatty acids, the linoleic acid content was found to be 1.1-fold higher in the SR (32.9%) than in the WB (29.0%). Potassium, which was the most abundant among the macro minerals, was 1.1-fold more abundant in the WB (1,074.5 mg/100 g) than in the SR (1,014.0 mg/100 g). Among the micro minerals, zinc content was 1.2-fold higher in the SR (14.5 mg/100 g) than in the WB (11.9 mg/100 g). The results of the analysis of hazardous substances in the WB and SR revealed that the amount of heavy metals met the standards for heavy metals in edible insects, and food poisoning-inducing bacteria such as Escherichia coli and Salmonella spp. were not detected in all groups. These results indicate that mealworm larvae fed with 10% soymilk residue have abundant nutrients and are safe for intake. Thus, food sources with added soymilk residue has the potential to be used as feed ingredients.