• 대한치과기공학회지
• /
• 제45권3호
• /
• pp.67-73
• /
• 2023

Purpose: This in vitro study aimed to evaluate the clinical acceptability of precision of fit of the support thickness of Co-Cr alloy copings fabricated using selective laser melting (SLM). Methods: Thirty dental stone models of maxillary left molar abutments were manufactured, images were taken using a scanner, and a computer-aided design program was used to design the form of a conventional metal ceramic crown coping. Overall, 30 single copings were made from Co-Cr alloy using SLM and divided into three support radius groups (0.1, 0.25, and 0.35 mm) of 10 for each. Digitized data were superimposed with three-dimensional inspection software to quantitatively obtain the machinability of a ceramic crown coping, and visual differences were confirmed using a color map. The root mean square values of the ceramic crown coping group were statistically analyzed using one-way analysis of variance (α=0.05). Results: The precision of fit was superior with 0.25 mm compared with 0.1 mm and 0.35 mm, and the results exhibited significant differences (p<0.05). All specimens showed that various support thicknesses did not exceed the clinically permitted value of 120 ㎛, which mean that more than 0.1 mm and 0.35 mm of support radius for SLM was adequate. Conclusion: The support thickness of Co-Cr alloy restoration fabricated using SLM is shown to affect the adaptation.

• 대한치과기공학회지
• /
• 제45권4호
• /
• pp.87-94
• /
• 2023

Purpose: This study aimed to observed changes in the shape of dental barrels based on application time. Machinability measures the angle of alloy specimens. Polishing performance measures the surface roughness of alloy specimens. Methods: The dental barrel polishing equipment used in this study was a Snow Barrel (DK Mungyo). Three types of cobalt-chromium alloys for partial dentures were used as specimens (BC CAST R [BP]; Bukwang, Vera PDI [VP]; Aalbadent, and GM 800+ [GP]; Dentaurum). Specimens were prepared in the form of plates (10 mmx10 mmx2 mm). Dental barrel polishing was performed at 450 rpm for 60 minutes with intervals of 5 minutes. The processing angle was measured using a microscope (SZ61; Olympus). Results: For the angle measurement, the VPC specimen was measured at 78.64°, 36.00° for the VP60 specimen, 79.57° for the BP control (BPC) specimen, 28.07° for the BP60 specimen, 75.01° for the GPC specimen, and 39.92° for the GP60 specimen. For the surface roughness measurements, the average surface roughness of the VPC and VP15 specimens were 1.09 ㎛ and 0.26 ㎛, respectively. The average surface roughness of the BPC and BP20 specimens were 1.77 ㎛ and 0.29 ㎛, respectively. The average surface roughness of the GPC and GP15 specimens were 1.08 ㎛ and 0.27 ㎛. Conclusion: The results were excellent after about 20 minutes of dental barrel polishing conditions presented in this study.

• 마이크로전자및패키징학회지
• /
• 제24권4호
• /
• pp.39-46
• /
• 2017

본 연구는 평판형 히터용 금속방열판상의 세라믹 절연층 제조, 즉 절연성 금속기판에 관한 것이다. 반도체나 디스플레이의 열처리 공정 등에 사용되는 평판형 히터를 제조함에 있어서, 온도 균일도를 높이기 위해 금속 방열판으로서 열전도율이 높고, 비교적 가벼우며, 가공성 좋은 알루미늄 합금 기판이 선호된다. 이 알루미늄 기판에 발열 회로 패턴을 형성하기 위해서는 금속 기판에 절연층으로서 고온 안정성이 우수한 세라믹 유전체막을 코팅하여야 한다. 금속 기판상에 세라믹 절연층을 형성함에 있어서 가장 빈번히 발생하는 첫 번째 문제는 금속과 세라믹의 이종재료 간의 큰 열팽창계수 차이와 약한 결합력에 의한 층간박리 및 균열발생이다. 두 번째 문제는 절연층의 소재 및 구조적 결함에 따른 절연파괴이다. 본 연구에서는 이러한 문제점 해소를 위해 금속소재 기판과 세라믹 절연층 사이에 완충층을 도입하여 이들 간의 기계적 매칭과 접합력 개선을 도모하였고, 다중코팅 방법을 적용하여 절연막의 품질과 내전압 특성을 개선하고자 하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2001년도 추계학술강연 및 발표대회
• /
• pp.7-7
• /
• 2001

The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.107-114
• /
• 2017

터보차저는 배기가스로 구동되는 엔진 과급기를 말하며, 배기에너지를 이용하여 배기통로에 연결된 터빈의 회전력을 변화시켜, 혼합 가스의 충전효율을 높여 출력과 연비를 향상 시키는 부품이다. 이러한 목적에 따라 과급을 조절해주는 것이 중요하며, 핵심 부품 중 노즐 슬라이드 조인트가 있다. 소재는 현재 오스테나이트 계 스테인리스강으로 높은 내열성과 내식성 등의 우수한 기계적 성질을 이용하고 있다. 그러나 절삭성이 나쁘기 때문에 절삭가공에 의해 복잡한 형상의 제품을 만드는데 어려운 점이 많다. 현재 노즐 슬라이드 조인트의 가공방법은 금속분말 사출성형후 치수정밀도를 위해 절삭가공을 행하고 있다. 따라서 본 연구에서는 Nitronic 60을 이용하여 터보차저 과급유량을 조절해주는 노즐 슬라이드 조인트의 제작 공정에서 절삭가공이 필요 없는 정형가공 공정을 제안하기 위하여, 기계적 특징에 영향과 연관이 있는 소결온도, 제품의 응력 및 변형률, 형상과 관련이 있는 모따기 펀치각도 및 펀치의 곡률반경을 설계변수로 선정하였다. 그에 따라 유한요소해석과 실험계획법인 다구찌법 및 SN비를 이용하여 가장 좋은 공정 조건을 제안하였다. 최종제품과 유한요소해석 결과의 상대밀도 및 정수압을 비교하여 경향이 일치함을 알 수 있었다. 따라서 다구찌법을 이용한 금속분말의 성형공정 설계에 유용하게 적용할 수 있을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.357-366
• /
• 2014

백합나무 판재를 벽판재로 이용하기 위해 백합나무의 생재와 건조재에 대한 휘발성유기화합물(VOCs)과 알데히드류 방출 특성을 검토하였다. VOCs 및 formaldehyde를 포함한 aldehyde류의 방출량 측정은 다중이용시설 등의 실내공기질 관리법에 공시된 20 ${\ell}$ Chamber법에 따라 실시하였다. 백합나무의 생재 및 건조재에서는 30여 가지 이상의 VOCs가 검출되었다. 백합나무의 Total VOC 구성 비율 가운데 천연VOC (NVOC)의 비율은 11.1%로 다른 침엽수종과 비교하여 낮게 나타났다. 백합나무의 aldehyde류 분석 결과, 심재 및 변재에서 같은 3종(acetaldehyde, ketone, propionaldehyde)이 검출되었으며, formaldehyde의 방출량은 $4.01{\mu}g/m^3$ 이하로 나타났다. m-Tolualdehyde의 경우 백합나무 건조재의 심재에서만 $33.6{\mu}g/m^3$의 방출량을 보였으며, 심재와 변재 모두 ketone의 방출량이 가장 높게 나타났다. 백합나무 특유의 역한 냄새는 acetaldehyde와 propionaldehyde와 기타 VOCs에 의한 것으로 추정된다. 건조한 백합나무에서는 휘발성이 강한 ketone의 방출량이 증가하였다.

• 한국식품영양학회지
• /
• 제33권3호
• /
• pp.287-298
• /
• 2020

When producing rice products, it is very important to select suitable raw materials. Therefore, in this study, the quality characteristics of 16 rice cultivars were quantified to determine the criteria for evaluating the machinability of raw rice. The L value, which can affect the color of porridge prepared from rice, was the greatest for Hwaseonchalbyeo (84.17). The water-binding capacity, related to water interaction, was high in Hyangcheola (113.2%), and water solubility was high in Shingil (22.3%). Dodamssal (42.3%, 70.7 RVU) and Hwaseonchalbyeo (4.7%, 27.8 RVU) showed lower final viscosity compared to the cultivars in which the amylose content was medium groups (16.4~21.2%, 173.6~277.2 RVU). Specifically, cultivars with high or low amylose content had a low viscosity. The characteristics of the distribution of raw rice quality data were confirmed through 11 histograms. Furthermore, amylose content vs. water solubility, water solubility vs. peak viscosity, and peak viscosity vs. final viscosity showed high correlations (r=0.542, -0.569, and 0.836 respectively, p<0.01), and clear cultivar discrimination by the standard error of the mean (0.765~10.811). In conclusion, amylose content, water solubility, and peak viscosity were considered the most suitable characteristics for the quality evaluation of raw rice.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.936-942
• /
• 2018

The diagnostic multi-leaf collimator preventing unnecessary dose from entering into patients during the diagnostic examination was made in this study. The movement of the entire 50 leaves was embodied with the group of 25 ones thereof configured in a pair facing each other on the left and right of the median line. Dimensions of the length, width, and height of each shielding leaf were $5{\times}0.5{\times}0.5cm^3$ resulting in the maximum boost field of $10{\times}10cm^2$. The material of multi-leaf collimator had the excellence on the machinability with the use of the SKD-11 alloy tool steel having the high wear resistance against frequent movement, and it was devised to control both-side's shielding leaves by moving 2 motors unlike existing remedial multi-leaf collimator that use as many motors as the number of 50 shielding leaves. Thereafter, the transmission dose of leaves, cross-leaf leakage dose, and inter-leaf leakage dose were measured by the developed multi-leaf collimator attached to X-ray equipment. An ionization chamber was used to detect doses there from, and the comparative analysis was carried out by means of the radiographic film that was easy to detect the dose leakage in between each leaf. Results obtained from the test conducted in comparative analysis yielded approximately 98%, 96%, and 94% of shielding efficiency realized at each level of energy of 80kV, 100kV, and 120kV it was confirmed there was no dose leakage resulted from the varied level of irradiation energy. Thus the multi-leaf collimator to be developed based on this study is thought that it could fully reduce the unnecessary dose to patients in the diagnostic test and the shielding efficiency thereof is expected to be increasing if it is made in a miniaturized form with a way of increasing the thickness of each leaf later for an extended application to general diagnostic purposes.

• 한국정밀공학회지
• /
• 제3권2호
• /
• pp.62-75
• /
• 1986

An experimental investigation of the machining characteristics such as cutt- ing resistance, surface roughness and tool wear in turning the test pieces of SM45C steel with both coated and uncoated carbide tool tips under various cutting conditions was conducted. Also a specially designed simple vibration damping device was experimentally evaluated for its effectiveness on machined surface roughness and a vibration test was conducted to confirm its ability to reduce the amplitude. Based on these tests finding, the following conclusions are made; 1. The cutting resistance($\textrm{p}_{1}$) increases as the depth of cut(d) increases at fixed feed rate(f) over the cutting speed(v) range of 43-226 m/min and p decreses about 18% average when V is increased for fixed d and f. At V= 226m/min, $\textrm{p}_{1}$/for A, C tips are about the same level but $\textrm{p}_{1}$ for B tip is 15% less than A, C tips. 2. The specific cutting resistance(Ks) at V=226 m/min was derived for A, B, C tips respectively and the value of Ks for B rip is about 20% less than A, C tips. 3. The surface roughness(Ra) improves significantly as the cutting speed(V) is increased and this effect was greater when V>100 m/min. On the other hand, Ra deteriorates as the feed rate(f) is increased and this trend was accelerated when f>0.3 mm/rev. With regard to the difference of Ra values among A, B, C tips, at V=226m/min, d=0.4mm, and f=0.31-0.61mm/rev, Ra values for B.C tips are about 17% less than tip A. 4. The experimental tool wear equations were derived for A, B, C tips and from these equations, the tool life($\textrm{T}_{\textrm{L}}$) baced on the I.S.O. criteria was calculated to be $\textrm{T}_{\textrm{L}}$<$\textrm{T}_{\textrm{LB}}$<$\textrm{T}_{\textrm{LC}}$ for both flank wear($\textrm{V}_{\textrm{B}}$) and boundary wear($\textrm{V}_{\textrm{N}}$). Hence, the coated tips are superior to the uncoated tip and tip C is considered to be the best. 5. The cutting resistance may be slightly reduced and the surface rounghness improved when the damper is used especially when V>100 m/min. Therefore this damping device is considered to be effective and practical. The experimental surface roughness equations were also derived. Based on the vibration test, it is established that the surface roughness improvement was the result of amplitude reduction made possible by the damper.

• 공업화학
• /
• 제32권6호
• /
• pp.664-670
• /
• 2021

스테인리스강은 기계적 강도와 전기 전도성이 우수하고 가공이 용이하여 고분자전해질 연료전지의 분리판으로 적용되고 있다. 하지만 스테인리스강의 부식으로 인하여 접촉 저항이 증가하여 연료전지 성능이 저하하는 문제점이 있고, 귀금속 재료를 코팅하여 내식성을 높일 수 있으나 비용이 증가하는 단점이 있다. 금속 분리판의 내구성 확보와 경제성 개선을 위하여 고분자전해질 연료전지에서 스테인리스 강 분리판의 부식 거동과 부동태막에 의한 영향을 분석할 필요가 있다. 본 연구에서는 반응 면적이 25 cm²인 SUS316L 분리판을 제작하였고, 수소극과 공기극에 대한 SUS316L 분리판의 부식 거동을 분석하였다. SUS316L 분리판 부식이 연료전지 성능에 미치는 영향을 분극 곡선과 임피던스, 접촉저항을 측정하여 평가하였다. 연료전지 구동 간에 배출 수를 포집하여 SUS316L 분리판에서 용출된 금속 이온의 농도를 분석하였다. SUS316L 분리판에 대하여 공기극에서보다 수소극에서 부식이 활발하게 발생하는 것을 확인하였다. 연료전지 반응에 따라 부동태막이 형성되어 접촉 저항이 증가하였고, 부동태막이 형성된 이후에도 지속적으로 금속 이온이 용출되었다.