Acknowledgement
This paper was supported by RESEARCH FUND offered from Catholic University of Pusan.
References
- Jeong YC. Effect of polishing time of surface roughness and surface topography on Co-Cr alloy by dental auto polishing system [master's thesis]. Busan: Catholic University of Pusan, 2020.
- Boschetto A, Bottini L, Veniali F. Microremoval modeling of surface roughness in barrel finishing. Adv Manuf Technol. 2013;69:2343-2354. https://doi.org/10.1007/s00170-013-5186-4
- Won JH, Oh RT, Kim JH, Kim WK. A study on the centrifugal barrel finishing of 3 dimensional form face (1). Paper presented at: Korean Society for Precision Engineering 1998 Fall Conference; 1998 Nov 2; Seoul, Korea. Seoul: Korean Society for Precision Engineering, 1998. p. 31-35.
- Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater. 1997;13:258-269. https://doi.org/10.1016/S0109-5641(97)80038-3
- Jung A. Manufacturing of barrel finishing for dental resin grinding and analysis of barrel finishing processing products [doctoral dissertation]. Busan: Catholic University of Pusan, 2021.
- Ko HJ. Observation of work piece machinability according to dental barrel finishing time [master's thesis]. Busan: Catholic University of Pusan, 2022.
- Ko HJ, Park YJ, Choi SM. Observations of surface roughness of Co-Cr alloys according to grinding time of dental barrel finishing. J Tech Dent. 2021;43:93-98. https://doi.org/10.14347/jtd.2021.43.3.93
- Park JM, Kim WC. Effect of surface modification by heat treatment of Co-Cr alloy. J Korean Soc Heat Treat. 2010;23:137-141.
- Hong MH. The study on inner stability of the dental SLM alloy body by conditions of the electro-polishing [master's thesis]. Busan: Catholic University of Pusan, 2013.
- Ryu JH, Lee HJ, Cho HS, Paeng JM, Park JB, Lee JI. Effects of GPS heat-treatment on microstructure of ascast Co-Cr alloy. J Korean Cryst Growth Cryst Technol. 2017;27:263-267.
- Wang N, Zhao T, Yang S, Li W, Zhao K. Experiment and simulation analysis on the mechanism of the spindle barrel finishing. Int J Adv Manuf Technol. 2020;109:57-74. https://doi.org/10.1007/s00170-020-05609-y
- Lee JS. A study on the barrel finishing process selection [master's thesis]. Siheung: Korea Polytechnic University, 2010.
- Khorasani, M, Gibson I, Ghasemi A, Brandt M, Leary M. On the role of wet abrasive centrifugal barrel finishing on surface enhancement and material removal rate of LPBF stainless steel 316L. J Manuf Process. 2020;59:523-534. https://doi.org/10.1016/j.jmapro.2020.09.058
- Astakhov VP, Joksch S. Metalworking fluids (MWFs) for cutting and grinding. Woodhead Publishing, 2012.