• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.419-426
• /
• 2009

Purpose : The aim of this study was to evaluate the difference of bone mineral density according to distal radius rotation and to develop the supporting tool to measure rotation angles. Materials and Methods : CT scanning and the measurement of BMD by DXA of the appropriate position of the forearm were performed on 20 males. Twenty healthy volunteers without any history of operations, anomalies, or trauma were enrolled. The CT scan was used to evaluate the cross sectional structure and the rotation angle on the horizontal plane of the distal radius. The rotational angle was measured by the m-view program on the PACS monitor. The DXA was used in 20 dried radii of cadaveric specimens in pronation and supination with five and ten degrees, respectively, including a neutral position (zero degrees) to evaluate the changes of BMD according to the rotation. Results : The mean rotation angle of the distal radius on CT was 7.4 degrees of supination in 16 cases (80%), 3.3 degrees of pronation in three cases (15%), and zero degree of neutral in one case (9%), respectively. The total average rotation angle in 20 people was 5.4 degrees of supination. In the cadaveric study, the BMD of the distal radius was different according to the rotational angles. The lowest BMD was obtained at 3.3 degrees of supination. Conclusion : In the case of the measurement of BMD in the distal radius with a neutral position, the rotational angle of the distal radius is close to supination. Pronation is needed for the constant measurement of BMD in the distal radius with the rotation angle measuring at the lowest BMD and about five degrees of pronation of the distal radius is recommended.

• Journal of Sensor Science and Technology
• /
• v.6 no.4
• /
• pp.328-336
• /
• 1997

The CdSe thin films were grown on the Si(100) wafers by a hot wall epitaxy method (HWE). The source and substrate temperature are $600^{\circ}C$ and $430^{\circ}C$ respectively. The crystalline structure of epilayers was investigated by double crystal X-ray diffraction(DCXD). Hall effect on the sample was measured by the van der Pauw method and studied on the carrier density and mobility dependence on temperature. From Hall data, the mobility was increased in the temperature range 30K to 150K by impurity scattering and decreased in the temperature range 150k to 293k by the lattice scattering. In order to explore the applicability as a photoconductive cell, we measured the sensitivity(${\gamma}$), the ratio of photocurrent to darkcurrent(pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time. The results indicated that the photoconductive characteristic were the best for the samples annealed in Cu vapor compare with in Cd, Se, air and vacuum vapour. Then we obtained the sensitivity of 0.99, the value of pc/dc of $1.39{\times}10^{7}$, the MAPD of 335mW, and the rise and decay time of 10ms and 9.5ms, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.1 s.47
• /
• pp.15-29
• /
• 2006

Synthetic Mn-tourmalines (tsilaisite) were obtained by hydrothermal synthesis under the condition of 2 Kbar, $375{\sim}700^{\circ}C$, and 50 day-run-time with complete substitution of Mg in dravite by Mn (Mn%=0, 25, 50, 75, and 100%). They are all 6 samples containing Mn-tourmaline with some amounts of albite, spessartine, rhodocrosite, phlogopite etc, showing different synthetic condition of temperature and Mn composition. Synthetic Mn-tourmalines are of site deficiency in X-site ($0.53{\sim}0.68$) more than that of natural ones (approx. $0.2{\sim}0.3$) and show Mn cations occupying Y-site less than expected with initial experiments, leading to failure in synthesis of end-member tsilaisite. Rietveld structural refinements reveal that $R_{wp}$ ($R_{p}/R_{exp}$) is in the range of 13.35 and 18.62%, $R_{B}$ and S (CofF) are $4.85{\sim}6.25%$ (S-18: 8.57%), $1.31{\sim}1.59$ (S-18: 1.81), respectively. Unit cell parameters (space group R3m, z=3) are ${\alpha}=15.8994\;{\AA}$ and $c=7.1846\;{\AA}$ in average (S-18: ${\alpha}=15.9491\;{\AA},\;c=7.1773\;{\AA}$). Average bond lengths of and are $2.67{\sim}2.69\;{\AA}$ (S-18: $2.65\;{\AA}$) and $2.00{\sim}2.02\;{\AA}$ (S-18: $1.96\;{\AA}$), respectively. Ditrigonality (${\delta}$) are in the range of 0.022 and 0.031 (S-18: 0.061), indicating degrading symmetry with increase of Mn content.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.4
• /
• pp.37-50
• /
• 2016

Recognizing the problem of fallacy in geographical name of Changokbyeong(蒼玉屛), assumption has been made on the location of Changokbyeong through literature research on antique maps, ancient paintings, and old prose, through field survey on rock inscriptions and landscape characteristics, and through interviews with local people. Furthermore, Baegyeonwa, the Cuckoo Hut, and Iyangjung(二養亭), an annex to the cottage, both of which were managed by Saahm Park Soon(思菴 朴淳), the Subject of Jouissance, were studied in depth with emphasis on the spatial structure as well as special features of the area as a garden. The major findings are as follows: Changokbyeong is a spatial threshold that imparts a sense of unity with Okbyeng seowon(玉屛書院) and indeed Changokbyeong is presumed to have been the frontal river terrace of Okbyeng seowon according to the analysis of antique maps and rock inscriptions. This ancient location and the Ogari Stone Wall, the present day Changokbyeong, are only 460m away so that both areas are considered as falling under the influence of Changokbyeong landscape. The expression "Changokbyeong Geupsangeum(蒼玉屛及散襟)" written in an old prose tells us that the high rock wall with Sangeumdae inscribed on the rock might be the rock wall of Changokbyeong. In addition, while not a single rock inscription has been found on the Ogari Stone Wall, 11 rock inscriptions designed and ordered by Saahm Park Soon, the Subject of Jouissance, are found on every corner of the high rock wall standing in front of Okbyeng seowon, 8 of those 11 being place names and recitative poems(known as Jeyeongsi: 題詠詩) in close formation resembling the handwritings in a little notebook. This provides a strong evidence for assuming the location of Changokbyeong to be the frontal river terrace of Okbyeng seowon. The "Songgyun Jeoljo Suwol Jeongshin(松筠節調 水月精神)" rock inscription on Changokbyeong should be considered as the stamping ground and as the symbolic language of Changokbyeong that bears the high character and nobility of the Subject of Jouissance, Saahm Park Soon. The inscription should also be recognized as the handwritings of Wooahm Song Si-Yeol(尤庵 宋時烈) correcting the misconceptions that persisted until today. Meanwhile, the garden remains of Saahm's Changokbyeong are composed of four sites: Sangeumdae-Sugyeongdae-Cheonghakdae-Baekhakdae from the left. At the back of Sangeumdae, there is the original house, the Baegyeonwa(拜鵑窩), and on the fantastically shaped stone wall at the left of Baekhakdae, there is the annex, the Iyangjung, together creating a landscape composition that overlooks the splendor of the Ogari Stone Wall. The Iyangjung is located on the highest spot to the left of the four sites, and it is believed to have been a little outhouse and library for Saahm which remains to the present day as a place where Saahm's character can be felt. The drinking plates[窪樽] made of rock that are affectionately arranged on the broad flat rock in front of Iyangjung is part of the garden remains that reflects the artistic taste of Saahm regarding the drinking culture at the time.

• Geophysics and Geophysical Exploration
• /
• v.23 no.1
• /
• pp.22-37
• /
• 2020

We analyze the comprehensive three-dimensional (3D) magnetic structure characteristics from the seafloor to the deep layer of the Tofua Arc (TA) 12 seamount in the Tonga Arc, Southwestern Pacific, using bathymetric and geomagnetic data, and magnetization vector inversion (MVI) results. The seafloor features surrounding TA 12 highlight a NW-SE-oriented elliptical caldera at the summit of the seamount, two small cones in the depressed area. A large-scale sea valley is present on the western flank of the seamount, extending from these caldera cones to the southwestern base of the seamount. TA 12 seamount exhibits a low magnetic anomaly in the caldera depression, whereas a high magnetic anomaly is observed surrounding the low magnetic anomaly across the caldera summit. It is therefore presumed that there may be a strong magnetic material distribution or magma intrusion in the caldera. The 3D MVI results show that the high anomaly zones are mainly present in the surrounding slopes of the seamount from the seafloor to the -3,000 m (below the seafloor) level, with the magnetic susceptibility intensity increasing as the seafloor level increases at the caldera depression. However, small high anomaly zones are present across the study area near the seafloor level. Therefore, we expect that the magma ascent in TA 12 seamount migrated from the flanks to the depression area. Furthermore, we assume that the complex magnetic distribution near the seafloor is due to the remnant magnetization.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.678-688
• /
• 2021

This study was conducted to provide growth characteristics and stand information in preparation for natural regeneration method and silvicultural treatment of seed tree method in Korean red pine stands by using the field inventoried data 18 years after the seed tree regeneration method in 2001 and analyzing the stand and sapling characteristics. The study area was located in the Research Forest of Kangwon National University, Chuncheon-si, Gangwon-do. In November 2018, we collected tree measurement factors, such as diameter at breast height (DBH), height, crown class, stem quality, tree age, and annual height increment on the established plots. We calculated the basal area, volume, height-diameter ratio (HD ratio), and additional stand density variables such as the relative density and %stocking to analyze the managed stands. The number of mother trees was 58 trees/ha, with a 17.7% stocking level, whereas the number of saplings was 2,330 trees/ha, with a 79.0% stocking level. In germination, the age distribution of saplings ranged from 2001 to 2007, with most belonging to 15-16 years. The development condition of saplings was 10 cm in DBH and 8 m in height. DBH and height were higher as the crown class is more dominant, and this difference was statistically significant in the analysis of variance and Duncan's multiple comparison test (p<0.0001). HD ratio ranged mostly between 80% and 90%, and more than 95% of sapling stems were of high quality, with a straight, unbroken top, non-sweep, and non-diseased stem. On average, the annual height increment of saplings was 21.9 cm at 1 year, 43.3 cm at 5 years, 54.3 cm at 10 years, and 64.3 cm at 15 years. The overall height growth with age increased smoothly. According to the analysis of covariance, the annual height growth by crown class differed significantly. The regression analysis parameters revealed that annual height growth increased with age and dominant crown class.

• Journal of the Korean earth science society
• /
• v.39 no.6
• /
• pp.519-532
• /
• 2018

We investigated the effect of galactic plane toward molecular motion and kinematics in the northern filament (NF) of Orion Molecular Clouds Complex (OMC) using $^{12}CO$ (J=1-0) line. Observed data were from three areas including NF1, NF2, and NF3 in far-out order from galactic plane, for a total 270 hours by Seoul National University Radio Astronomy Observatory (SRAO) 6m telescope, with 2arcmin spatial resolution. galactic plane and OMC NF were connected to each other along the magnetic field at a density of 3% for $^{12}CO$ (J=2-1) and 9% for the case of dust. $^{12}CO$ (J=1-0), $^{12}CO$ (J=2-1), and interstellar dusts were distributed uniformly in NF3, but only in certain regions with relatively high density in NF1 and NF2. NF showed a single structure, partial shrinking motion in NF1, and rotational motion at the bottom of NF2, and spiral rotation associated with magnetic field only in NF3. The position-velocity analysis showed that the materials including $^{12}CO$ (J=1-0) could flow toward galactic plane along NF2 and NF3. However, there was no clear cause for the material to flow toward galactic plane in this result. Further detailed observation for rotational motion at the top of NF1 and NF2 might help to confirm it.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.1
• /
• pp.76-87
• /
• 2019

The purpose of this study was to evaluate the performance of and to derive future maintenance-management measures of the constructed alternative habitat for the Kaloula borealis at the University of Seoul, examining the period between 2015-2017. The research was constructed in 2014 and in a $191m^2$ area. The performance evaluation was divided into maintaining the habitat of the target species, maintaining the population and reproduction rates of the target species, maintaining the habitat of the wild species, the resilience of natural ecosystems, and the harmony with the surrounding environment. In terms of maintaining the habitat of the target species, soil collected from the existing habitat of the Kaloula borealis and was the depth was increased to 30cm in the alternative habitat. An artificial water supply was required every year during the supporting the spawning and hatching of other amphibians along with the Kaloula borealis. The sources of water of the alternative habitat were both rain and tap water, as it cannot be maintained naturally. Additionally, the Kaloula borealis thrived because it inhabited the research site and the average temperature was $26.2^{\circ}C$ from April-June, which is when the Kaloula borealis spawns. In terms of maintaining the population and reproduction rates of the Kaloula borealis, they were evaluated to have stable rates of reproduction. In terms of maintaining the habitat of the wild species, studies on vegetation and the structure of the characteristics of prey or predators will be needed. Also, alien species, such as Humulus japonicus and Bidens frondosa needed to be removed to maintain the wetland ecosystem of the wild species. In the assessment of the resilience of the natural ecosystems, the mud was monitored, noting the changes in the depth of water, with steps taken to reduce the leakage of water. The mud collected from the Haneul Pond wetland, which is located around the research site was piled up. Also, partial mowing management and the inducement of a natural vegetation colony was required for vegetation management. It was also necessary to create porous spaces, such as old trees and tree branches to create a habitat with hiding places and feeding and spawning places for small organisms. In terms of the harmony with the surrounding environment, the following threat factors needed to be managed: amphibian roadkill by vehicles and pedestrians and artificial draining due to nearby user access. Based on the monitoring results, alternative habitat management measures presented the promoting various waterside structures, in which amphibians can spawn and hide in, managing the water environment consistently, managing the vegetation, focused on the habitat of the wild species, and managing the surrounding environment for the habitat. The creation of an alternative habitat should be managed through monitoring, reflecting the characteristics of the changes in the site. Also continuing efforts are also needed to improve the habitat of the target species.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.95-103
• /
• 2019

Temperature and relative humidity are important factors in crop cultivation and should be properly controlled for improving crop yield and quality. In order to control the environment accurately, we need to predict how the environment will change in the future. The objective of this study was to predict air temperature and relative humidity at a future time by using a multilayer perceptron (MLP). The data required to train MLP was collected every 10 min from Oct. 1, 2016 to Feb. 28, 2018 in an eight-span greenhouse ($1,032m^2$) cultivating mango (Mangifera indica cv. Irwin). The inputs for the MLP were greenhouse inside and outside environment data, and set-up and operating values of environment control devices. By using these data, the MLP was trained to predict the air temperature and relative humidity at a future time of 10 to 120 min. Considering typical four seasons in Korea, three-day data of the each season were compared as test data. The MLP was optimized with four hidden layers and 128 nodes for air temperature ($R^2=0.988$) and with four hidden layers and 64 nodes for relative humidity ($R^2=0.990$). Due to the characteristics of MLP, the accuracy decreased as the prediction time became longer. However, air temperature and relative humidity were properly predicted regardless of the environmental changes varied from season to season. For specific data such as spray irrigation, however, the numbers of trained data were too small, resulting in poor predictive accuracy. In this study, air temperature and relative humidity were appropriately predicted through optimization of MLP, but were limited to the experimental greenhouse. Therefore, it is necessary to collect more data from greenhouses at various places and modify the structure of neural network for generalization.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.8-15
• /
• 2021

TiO2 has been used in various fields such as solar cells, dental implants, and photocatalysis, because it has high physical and chemical stability and is harmless to the body. TiO2 nanofibers which have a large specific surface area also show a good reactivity in bio-friendly products and excellent photocatalysis in air and water purification. To fabricate TiO2 nanofibers, an electrospinning method was used. To observe the diameter of TiO2 nanofibers with fabrication variables, the fabrication variables was divided into precursor composition variables and process variables and microstructure was analyzed. The concentrations of PVP (Polyvinylpyrrolidone) and TTIP (Titanium(IV) isopropoxide) were selected as precursor composition variables, and inflow velocity and voltage were also selected as process variables. Microstructure and crystal structure of TiO2 nanofibers were analyzed using FE-SEM (Field emission scanning electron microscope) and XRD (X-ray diffraction), respectively. As-spun TiO2 nanofibers with an average diameter of about 0.27 ㎛ to 1.31 ㎛ were transformed to anatase TiO2 nanofibers with an average diameter of about 0.22 ㎛ to 0.78 ㎛ after heat treatment of 3 hours at 450℃. Anatase TiO2 nanofibers with an average diameter of 0.22 ㎛ can be expected to improve the photocatalytic properties by increasing the specific surface area. To change the average diameter of TiO2 nanofibers, the control of precursor composition variables such as concentrations of PVP and TTIP is more efficient than the control of electrospinning process variables such as inflow velocity and voltage.