• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.150-156
• /
• 2007

This study was conducted to analyze the genetic characteristics of Korean Native Pigs(KNP), and to establish an individual identification system comprising many microsatellite markers located on different pig autosomes. Genotype data from 13 microsatellites typed in 446 animals was used to determine the validation of a method of individual identification in 4 KNP. A total of 112 alleles of the 13 microsatellites were detected and average heterozygosities(polymorphic information content) ranged from 0.286(0.423) to 0.686(0.796) in this study. Comparing the pattern of allele frequency among the KNP, Yorkshire, Landrace and Duroc breeds, there was specific differentiation between populations at multi-allelic loci. The cumulative power of discrimination(CPD) was 99.999% by including 10 microsatellite loci for the individual identification system. The probability that two different individuals incidentally have same genotype was estimated to be $0.36{\times}10^{-9}$. The system employing these 10 markers therefore proved to be applicable to the individual identification of KNP.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.37-45
• /
• 2004

As Internet technologies are mature, many new applications that are different characteristics are emerging. Recently we see wide use of P2P(Peer to Peer) applications of which traffic shows different statistical characteristics compared with traditional application such as web(HTTP) and FTP(File Transfer Protocol). In this paper, we measured subscriber network of KT(Korea Telecom) to analyze P2P traffic characteristics. We show flow characteristics of measured traffic. We also estimate Hurst parameter of P2P traffic and compare self-similarity with web traffic. Analysis results indicate that P2P traffic is much bustier than web traffic and makes both upstream traffic and downstream traffic be symmetric. To predict parameters related QoS such as packet loss and delays we model P2P traffic using two self-similar traffic models and predict both loss probability and mm delay then compare their accuracies. With simulation we show that the self-similar traffic models we derive predict the performance of P2P traffic accurately and thus when we design a network or evaluate its performance, we can use the P2P traffic model as reference input traffic.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.1999-2006
• /
• 2016

Background: Acute promyelocytic leukemia (APML) is characterized by the reciprocal translocation t(15;17) (p22;p12) resulting in the PML-$RAR{\alpha}$ fusion gene. A dual diagnostic and follow up approach was applied including cytogenetic demonstration of the t(15;17) translocation and detection dg PML-$RAR{\alpha}$ chimeric transcripts by molecular means. Purpose: Conventional cytogenetics involving bone marrow is beset with high probability of poor metaphase index and was substituted with phytohemagglutinin (PHA)-induced peripheral blood culture based cytogenetic analysis as a diagnostic & follow up modality in APML patients of Kashmir (North India). Both qualitative (RT-PCR) and quantitative (Q-PCR) tests were simultaneously carried out to authenticte the modified cytogenetics. Materials and Method: Patient samples were subjected to the said techniques to establish their baseline as well as follow-up status. Results: Initial cytogenetics revealed 30 patients (81%) Positive for t(15;17) whereas 7 (19%) had either cryptic translocation or were negative for t(15;17). Two cases had chromosome 16q deletion and no hallmark translocation t(15;17). Q-PCR status for PML-$RAR{\alpha}$ was found to be positive for all patients. All the APML patients were reassessed at the end of consolidation phase and during maintenance phase of chemotherapy where 6 patients had molecular relapse, wherein 4 also demonstrated cytogenetic relapse. Conclusions: It was found that PHA-induced peripheral blood cytogenetics along with molecular analysis could prove a reliable modality in the diagnosis and assessment of follow up response of APML patients.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.7
• /
• pp.1013-1021
• /
• 2016

This study developed probabilistic models to predict Salmonella growth in processed meat products formulated with varying concentrations of NaCl and $NaNO_2$. A five-strain mixture of Salmonella was inoculated in nutrient broth supplemented with NaCl (0%, 0.25%, 0.5%, 0.75%, 0.5%, 1.0%, 1.25%, and 1.75%) and $NaNO_2$ (0, 15, 30, 45, 60, 75, 90, 105, and 120 ppm). The inoculated samples were then incubated under aerobic and anaerobic conditions at $4^{\circ}C$, $7^{\circ}C$, $10^{\circ}C$, $12^{\circ}C$, and $15^{\circ}C$ for up to 60 days. Growth (assigned the value of 1) or no growth (assigned the value of 0) for each combination was evaluated by turbidity. These growth response data were analyzed with a logistic regression to evaluate the effect of NaCl and $NaNO_2$ on Salmonella growth. The results from the developed model were compared to the observed data obtained from the frankfurters to evaluate the performance of the model. Results from the developed model showed that a single application of $NaNO_2$ at low concentrations did not inhibit Salmonella growth, whereas NaCl significantly (p<0.05) inhibited Salmonella growth at $10^{\circ}C$, $12^{\circ}C$, and $15^{\circ}C$, regardless of the presence of oxygen. At $4^{\circ}C$ and $7^{\circ}C$, Salmonella growth was not observed in either aerobic or anaerobic conditions. When $NaNO_2$ was combined with NaCl, the probability of Salmonella growth decreased. The validation value confirmed that the performance of the developed model was appropriate. This study indicates that the developed probabilistic models should be useful for describing the combinational effect of $NaNO_2$ and NaCl on inhibiting Salmonella growth in processed meat products.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.479-485
• /
• 2006

The double gate(DG) MOSFET is a promising candidate to further extend the CMOS scaling and provide better control of short channel effect(SCE). DGMOSFETs, having ultra thin undoped Si channel for SCEs control, ale being validated for sub-20nm scaling. A novel analytical transport model for the subthreshold mode of DGMOSFETs is proposed in this paper. The model enables analysis of short channel effect such as the subthreshold swing(SS), the threshold voltage roil-off$({\Delta}V_{th})$ and the drain induced barrier lowering(DIBL). The proposed model includes the effects of thermionic emission and quantum tunneling of carriers through the source-drain barrier. An approximative solution of the 2D Poisson equation is used for the distribution of electric potential, and Wentzel-Kramers-Brillouin approximation is used for the tunneling probability. The new model is used to investigate the subthreshold characteristics of a double gate MOSFET having the gate length in the nanometer range $(5-20{\sim}nm)$ with ultra thin gate oxide and channel thickness. The model is verified by comparing the subthreshold swing and the threshold voltage roll-off with 2D numerical simulations. The proposed model is used to design contours for gate length, channel thickness, and gate oxide thickness.

• Atmosphere
• /
• v.21 no.2
• /
• pp.131-142
• /
• 2011

Spectral solar irradiances were observed using a visible and UV Multi-Filter Rotating Shadowband Radiometer on the rooftop of the Science Building at Yonsei University, Seoul ($37.57^{\circ}N$, $126.98^{\circ}E$, 86 m) during one year period in 2006. 1-min measurements of global(total) and diffuse solar irradiances over the solar zenith angle (SZA) ranges from $20^{\circ}$ to $70^{\circ}$ were used to examine the effects of clouds and total optical depth (TOD) on enhancing four solar irradiance components (broadband 395-955 nm, UV channel 304.5 nm, visible channel 495.2 nm, and infrared channel 869.2 nm) together with the sky camera images for the assessment of cloud conditions at the time of each measurement. The obtained clear-sky irradiance measurements were used for empirical model of clear-sky irradiance with the cosine of the solar zenith angle (SZA) as an independent variable. These developed models produce continuous estimates of global and diffuse solar irradiances for clear sky. Then, the clear-sky irradiances are used to estimate the effects of clouds and TOD on the enhancement of surface solar irradiance as a difference between the measured and the estimated clear-sky values. It was found that the enhancements occur at TODs less than 1.0 (i.e. transmissivity greater than 37%) when solar disk was not obscured or obscured by optically thin clouds. Although the TOD is less than 1.0, the probability of the occurrence for the enhancements shows 50~65% depending on four different solar radiation components with the low UV irradiance. The cumulus types such as stratoculmus and altoculumus were found to produce localized enhancement of broadband global solar irradiance of up to 36.0% at TOD of 0.43 under overcast skies (cloud cover 90%) when direct solar beam was unobstructed through the broken clouds. However, those same type clouds were found to attenuate up to 80% of the incoming global solar irradiance at TOD of about 7.0. The maximum global UV enhancement was only 3.8% which is much lower than those of other three solar components because of the light scattering efficiency of cloud drops. It was shown that the most of the enhancements occurred under cloud cover from 40 to 90%. The broadband global enhancement greater than 20% occurred for SZAs ranging from 28 to $62^{\circ}$. The broadband diffuse irradiance has been increased up to 467.8% (TOD 0.34) by clouds. In the case of channel 869.0 nm, the maximum diffuse enhancement was 609.5%. Thus, it is required to measure irradiance for various cloud conditions in order to obtain climatological values, to trace the differences among cloud types, and to eventually estimate the influence on solar irradiance by cloud characteristics.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1121-1140
• /
• 1992

In metal cutting the shape of generated chip varies according to cutting conditions, characteristics of workpiece and geometry of cutting tool. The best surface roughness of machined workpiece is obtained when generating flow type contrinuous chip. If the generated chip is not broken, that is not only tangled workpiece and cutting tool, but also may give damage on the machined surface of workpiece or danger for a operator. The flow type continuous chip may bring the low productivity in high speed any heavy cutting, automatic machining process and non-human factory. There are two type of chip break process ; controlling cutting condition and using chip breaker. In present study we carried out the experiment on new type chip breaker compared with conventional type and proved the efficiency of a new type and showed the chip break condition to be applied in actual metal cutting. In the experiment SM 20 C as a workpiece material and WC as a tool material were used and cutting speed of 30-150m/min, feed of 0.071-0.210mm/rev and depth of cut of 1mm were applied as cutting condition. The results of the experiment are as follows : (1) The mechanism of chip curl can be explained more clearly by plastic flow of workpiece material and moment of shearing force. (2) The most effective radius of curled chip and flat distance from cutting edge is 2.0-2.5mm and 1.5mm in both types. (3) The effective inclination angle of chip break surface and side cutting edge angle are 30.deg.- 45.deg. and 20.deg. in conventional type, while the radius of arc surface, lower arc angle A, upper arc angle B and side cutting edge angle are 3mm, 20.deg.- 45.deg., 0.deg.- 45.deg. and 10.deg.- 20.deg. in new type. (4) The probability to be obtained 100% chip breaking ratio is much higher in new type than in conventional type.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.23-23
• /
• 2003

It has been suggested that the impairment of smooth muscle cell (SMC) function by alterations in the $Ca^{2+}$-activated $K^{+}$ ( $K_{Ca}$ ) channels accounts for the reduction in coronary reserve during left ventricular hypertrophy (LVH). However, this hypothesis has not been fully investigated. The main goal of this study was to assess whether the properties of $K_{Ca}$ channels in coronary SMCs were altered during LVH. New Zealand white rabbits (0.8-1.0 kg) and Sprague-Dawley rats (300-400 g) were randomly selected to receive either an injection of isoproterenol (300 $\mu\textrm{g}$/kg body weight) or an equal volume of 0.9％ saline (1 mL/kg body weight). The animals developed LVH 10 days after injection. In patch-clamp experiments, the unitary current amplitude and open probability for the $K_{Ca}$ channels were significantly reduced in LVH patches compared with control patches. The concentration-response curve of the $K_{Ca}$ channel to [C $a^{2+}$]$_{i}$ was shifted to the right. Inhibition of the $K_{Ca}$ channels with TEA was more pronounced in LVH cells than in the control cells. The whole-cell currents of $K_{Ca}$ channels were reduced during LVH. Western blot analysis indicated no differences in $K_{Ca}$ channel expression between the control and LVH coronary SM membranes. In contraction experiments, the effect of a high $K^{+}$concentration on the resting tension of the LVH coronary artery was greater than on that of the control. The effect of TEA on the resting tension of the LVH coronary artery was reduced as compared with the effect on the control. Our findings imply a novel mechanism for reduced coronary reserve during LVH.ing LVH.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.208-217
• /
• 2011

The effects of pH and temperature on the removal of two dyes (neutral red; NR and malachite green oxalates; MG) from aqueous effluents using Maghnia montmorillonite clay in a batch adsorption process were investigated. The results showed the stability of the optical properties of MG in aqueous solution and adsorbed onto clay under wide range of pH 3-9. However, the interaction of NR dye with clay is accompanied by a red shift of the main absorption bands of monomer cations under pH range of 3-5, whereas, those of neutral form remains nearly constant over the pH range of 8-12. The optimal pH for favorable adsorption of the dyes, i.e. ${\geq}$90% has been achieved in aqueous solutions at 6 and 7 for NR and VM respectively. The most suitable adsorption temperatures were 298 and 318 K with maximum adsorption capacities of 465.13mg/g for NR and 459.89 mg/g for MG. The adsorption equilibrium results for both dyes follow Langmuir, Freundlich isotherms. The numerical values of the mean free energy $E_a$ of 4.472-5.559 kj/mol and 2.000-2.886 kj/mol for NR and MG respectively indicated physical adsorption. Various thermodynamic parameters, such as ${\Delta}H^{\circ}$, ${\Delta}S^{\circ}$, ${\Delta}G^{\circ}$ and Ea have been calculated. The data showed that the adsorption process is spontaneous and endothermic. The sticking probability model was further used to assess the potential feasibility of the clay mineral as an alternative adsorbent for organic ion pollutants in aqueous solution.

• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.215-219
• /
• 2004

Due to their excellence for the high-energy therapy range of photon beams, researchers show increasing interest in applying MOSFET dosimeters to low- and medium-energy applications. In this energy range, however, MOSFET dosimeter is complicated by the fact that the interaction probability of photons shows significant dependence on the atomic number, Z, due to photoelectric effect. The objective of this study is to develop a very detailed 3-dimensional Monte Carlo simulation model of a MOSFET dosimeter for radiological characterizations and calibrations. The sensitive volume of the High-Sensitivity MOSFET dosimeter is very thin (1 ${\mu}{\textrm}{m}$) and the standard MCNP tallies do not accurately determine absorbed dose to the sensitive volume. Therefore, we need to score the energy deposition directly from electrons. The developed model was then used to study various radiological characteristics of the MOSFET dosimeter. the energy dependence was quantified for the energy range 15 keV to 6 MeV; finding maximum dependence of 6.6 at about 40 keV. A commercial computer code, Sabrina, was used to read the particle track information from an MCNP simulation and count the tracks of simulated electrons. The MOSFET dosimeter estimated the calibration factor by 1.16 when the dosimeter was at 15 cm depth in tissue phantom for 662 keV incident photons. Our results showed that the MOSFET dosimeter estimated by 1.11 for 1.25 MeV photons for the same condition.