• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.21-24
• /
• 2004

In this paper, we measured the optical characteristics of the electrodeless fluorescent lamp system as product of the inside and outside of the country and compared the measured data. Power consumption wave of domestic 150 W is unstable than it's of Endura 150 W. Optical characteristics(luminance, luminous flux, color rendering index, efficiency, CIE chromaticity coordinate) value of the former is a little small than the latter. In conclusion, if we improve a little more quality then we must secure the superiority in competition.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.99-102
• /
• 2009

Fixture 일체형 LED 다운라이트(Downlight)의 광 효율 향상을 위하여 LED 장착위치 및 Reflector 길이, 히트싱크(Heat sink) 형태에 따른 광도(luminous intensity)와 기구효율(luminaire efficiency)을 시뮬레이션을 통하여 비교분석 하였다. 또한 히트싱크의 방열 설계를 시뮬레이션 하고 상용 LED 패키지 (Cree, XP-E P4)를 사용하여 시제품을 제작 하여 그 성능을 평가하였다. 그 결과 광속 9661m, 상관 색온도(CCT) 3,060K, 연색지수(CRI) 82의 광 특성을 갖는 LED 다운라이트를 개발하였다.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.220-222
• /
• 2003

In this paper, we analyze on the discharge characteristics through 1-D simulations in an at plasma display panel discharge cell. The model is based on a Poisson' equation, continuity and drift-diffusion equation. Results are presented in a 95% neon, 5% xenon gas mixture, for a gap length of 100us and a gas pressure of 400Torr at ambient temperature. Results for other gap length are also discussed. As a result, an increase of the gap cause increase of luminous efficiency but with larger sustaining voltage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.121-122
• /
• 2008

Blue emitting materials have been explored by various researchers. However, blue-emitting materials with high luminous efficiency, good color purity, and thermal stability are still much desired. In this study, we synthesized a new blue luminescent material, $SnDP(HPB)_2$ which is low molecular compound and thermal stability. The PL spectrum of $SnDP(HPB)_2$ was observed blue at the wavelength of 447nm. The ionization potential(IP) and the electron affinity(EA) of $SnDP(HPB)_2$ was measured to be 6.7 eV and 3.0 eV, respectively. The fundamental structure of the OLED was ITO/NPB/$SnDP(HPB)_2/Alq_3$/LiF/Al. As a Result, we obtained to enhance the performance of blue OLED.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1261-1267
• /
• 2007

Although LEDs have been used in various applications with improving the brightness and luminous efficacy, the electrical and optical characteristics of high power LED varies at different temperature and starting time. In this paper, optimal heat sink and apparatus design were conducted using IR camera and ICEPAK on the LED bulb consisting with fourteen LED array. The temperatures of heat sink and LED device of the designed LED bulb without cooling pan were $74^{\circ}C\;and\;96.8^{\circ}C$, respectively, showing in good themal characteristics. For high efficiency driving circuit of LED array adopted optimal heat sink design, driving circuits of constant voltage and current circuits were suggested and fabricated. As a result the efficacy of all driving circuits showed more than 20 lm/W. Also, the constant current circuits are suitable for signal lamp, hallway lamp, and flash lamp having short operating time(about 30 min). On the other hand, a reading light and indoor lamp having long operating time can be controlled by constant voltage circuit.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.8-17
• /
• 2012

This paper proposes high performance control of light emitting diode(LED) drive system for liquid crystal display(LCD) backlight. The CCFL(cold cathode fluorescent lamp)was used to a conventional LCD backlight. Due to improvement on luminous efficiency, long life and wide color gamut, LED has gradually substituted for CCFL as backlight. The backlight using LED is necessary to use many LED. For that reason, the LED backlight is using a lot of LED driving circuits. The many LED driving circuit is generated a current deviation between LED. Eventually, it is caused brightness deviation between LED. Therefore, this paper improves the current deviation using transformer and balancing capacitor to solve this problem. Also, for accurate and uniform brightness control, this paper is applied the artificial intelligent control to a dimming control. This paper is compared with conventional system, and validity of this paper proves through that result.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.2
• /
• pp.14-21
• /
• 2013

Today, energy problem has become an important issue, and a development of renewable energy is urgent. In architectural fields, a research of the energy efficient lighting system using renewable energy is in progress. The energy efficient lighting system could be realized by integrating a daylight responsive LED lighting control system and a blind PV system. This system is able to save and generate electric energy. Efficiency of this system depends on control methods of blind PV. As a preliminary research, this research analyzed power generation and inflow of available daylight according to control method of blind PV.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1607-1610
• /
• 2007

The measurement technology of the electrical and optical properties of CCFL and EEFL for LCD-BLU is investigated. The lamp current and voltage are affected by the leakage of parasitic capacitance. The methods using the photometer and the integrating sphere are compared to determine the lamp efficiency.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.67-73
• /
• 2011

Ceramic metal halide lamps have been widely used due to long lifetime, high luminous efficiency and good colour rendering. In this paper, we developed dimming control system of electronic ballast for 70W ceramic metal halide lamp by using 1-10V interface. The proposed electronic ballast is consists of EMI filter, Full-wave rectifier, Active PFC, DBI(Dual Buck Inverter), Igniter and control circuit.It enables to supply both low-frequency rectangular wave voltage and current to the lamp by using DBI(Dual Bcuk Inverter) structure. By using 1-10V interface, the system that able to dimming the lamp is demonstrated by P-spice simulation and experimental results.

• Transactions of Materials Processing
• /
• v.21 no.2
• /
• pp.131-137
• /
• 2012

With the advantages of power savings, increased life expectancy and fast response time over traditional incandescent bulb, LEDs are increasingly used for many applications including automotive, aviation, display, and special lighting applications. Since the high heat generation of LED chips can reduce service life, degrade luminous efficiency, and cause variation of color temperature, many studies have been carried out on the optimization of LED packaging and heat sinks. In this study, a fin expansion type cooling device using heat pipe, instead of a solid aluminum heat sink, was designed for LED security lightings based on thermal resistance analysis. Numerical analysis and experimental validation were carried out to evaluate its cooling performance.