• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.10
• /
• pp.495-501
• /
• 2002

A difference based current transformer (CT) saturation detection algorithm uses the third difference of a secondary current to detect the instants of the beginning/end of saturation. The third difference of a secondary current contains high frequency components when a CT is saturated. Thus, an effect of an anti-aliasing lowpass filter implemented in digital protection relays on the detection algorithm should be studied. This paper describes performance analysis of a lowpass filter on the CT saturation detection algorithm. The cutoff frequency of the lowpass filter is normally set to be half of a sampling frequency. In this Paper, two sampling frequencies of 3,840 (Hz) corresponding to 64 sample/cycle (s/c) and 1,920 (Hz) corresponding to 32 (s/c) are studied; the cutoff frequencies of the lowpass filters are set to be 1,920 (Hz), 960 (Hz) and 960(Hz), 480(Hz), respectively. And the proposed algorithm is verified by experiment. A 2nd order Butterworth filter is designed as a lowpass filter. The test results and experiment results clearly indicate that the saturation detection algorithm successfully detects the instants of the beginning/end of saturation even though a secondary current is filtered by the designed lowpass filters.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.324-326
• /
• 2009

We present the design of a compact microstrip lowpass filter with a wide stopband which is up to ten times the cutoff frequency. The filter is based on a coupled-line configuration and shunt open stubs. The open stubs create additional transmission zeros, which are used to extend the stopband of the filter without any additional components or cascaded units. A prototype lowpass filter with a 3 dB cutoff frequency of 0.428 GHz and a 15 dB stopband extended up to 4.77 GHz is fabricated to validate the theoretical predictions.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.1
• /
• pp.103-109
• /
• 1995

In this paper, we propose a postprocessing method that neatly removes blocking effect but retains visually important image details and edges. The iterative thresholded lowpass filter is basically a low pass filter whose ouput depends on three variable elements. I.e. iteration number, threshold value and passband width. The threshold value restricts the difference between the output of the proposed filter and the original input independent of the iteration number. With this property, the iterative thresholded lowpass filter can retain most of the image details while smoothing the block boundaries. The other two variable elements, i.e. iteration number and passband width, can determine the convergence speed of the proposed filter. In this paper, we also propose several adaptive filtering techniques based on the iterative thresholded lowpass filter with their simulation results.

• ETRI Journal
• /
• v.19 no.2
• /
• pp.48-58
• /
• 1997

Using high quality high-$T_c$ superconducting (HTS) YBCO thin films, we designed and fabricated 3-pole, 5-pole, and 7-pole lowpass filters consisting of microstrip transmission lines and open-stub lines. We measured the microwave response of the filters in the temperature range of T=85 K to 27 K. AtT=30 K, the observed inband insertion loss was 0.14dB and 0.02dB for the 5-pole and 7-pole filters, respectively. The cut-off frequency was 4.7 GHz for the 5-pole filter and 7.9GHz for the 7-pole filter. To the authors' knowledge, the measured inband insertion losses are the best values reported so far for the open-stub line type HTS multipole lowpass filters. The skirt property of the 5-pole filter showed a large improvement over that of the 3-pole filter as predicted from the simulation. We found that, to obtain a stable performance, the HTS multipole lowpass filters should be operated at the temperatures between 60% and 70% of $T_c$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.644-652
• /
• 2004

In this paper, we designed a cascaded microstrip lowpass filter using the lowpass filters previously proposed. The previously proposed lowpass filters have a ultra-wide stopband and prominent cutoff sharpness using the combined characteristics of slot and microstrip open stub, respectively, and they are catagorized into 2 types by the method that determining their passband characteristics. The first type is determined its passband characteristics by open stub characteristics and the second is by slot characteristics. By cascading these structures with impedance adjustment of each element, the deeper out-of-band rejection and the sharper skirt response were achieved. The fabricated cascaded lowpass filters have -3㏈ cutoff frequencies at 1.035㎓ and 1.286㎓ respectively and -20㏈ stopband is over 20㎓ for both structures.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.81-89
• /
• 1996

In this paper, a very efficient CAD algorithm is proposedd where rhodes formulae combined with distributed lowpass prototype filter in order to design the corrugated waveguide harmonic rejection filters accurately. The proposed algorithm resolves effectively the problem of proximity effect without any optimiation or iterative design process by using the internally convexed corrugated structure. A 13-section tapered corrugated lowpass filter has been designed by the proposed algorithm and fabricated. The experimental results are in good agreement with the calculated results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1078-1082
• /
• 2002

In this paper, we have studied the dependence of insertion loss of a microstrip stepped impedance lowpass filter with coupled open stubs. Coupling mechanisms in the filter depend not only on the transmission line width of the filter but also the gap width of coupled open stubs and three attenuation poles are created with the proper conditions. Also edge capacitance between open stubs play an important role in having three attenuation Poles. We verify the results by obtaining [S] matrices.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.981-984
• /
• 2011

A novel lowpass filter with a very sharp transition band and wide stopband is proposed. The proposed filter is based on T-shaped patches which are etched in symmetrical structures and folded open stub. To obtain a wide stopband, we have used stub loaded semi-circle stepped-impedance structures. By designing the resonator with high inductance and capacitance, a very sharp transition band is achieved. The proposed filter has a 3-dB cutoff frequency at 2.37 GHz and a 40-dB rejection at 2.44 GHz. The stopband with an attenuation level better than -13.2 dB is up from 2.4 GHz to 16 GHz, and consequently we have reached the high and wide rejection in stopband with compact size. Good agreements between the simulated and the measured results are presented.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.331-334
• /
• 2006

In this paper, we designed and fabricated the lowpass filter with the wide stopband characteristics using microp- strip line. Adding the $\lambda_g/4$ open stub at the input and output ports, we developed the L-C ladder type lowpass filter using the open stub which has wide stopband characteristics. In order to reduce the entire size qf this filter, the high impedance microstrip lines were made with the meander structure. The lowpass filter was fabricated with the cutoff frequency 2.3 GHz and its measured frequency responses agree well with the simulation results.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.811-814
• /
• 1998

This paper proposes a constant time-delay filter with low sensitivity, which can be used for hard-disk drive. The sensitivity of 2nd order lowpass filter by two kinds of method, one is based on lossy integrators and the other is lossy and lossless integrators is analyzed and designed. SPICE simulation shows fesibility of a filter by the proposed approach.