• Structural Engineering and Mechanics
• /
• 제24권6호
• /
• pp.665-682
• /
• 2006

A vibration-based nondestructive damage evaluation technique for a curved thin beam is introduced. The proposed method is capable of detecting, locating, and sizing structural damage simultaneously by using a few of the lower natural frequencies and their corresponding mode shapes before and after a small damage event. The proposed approach utilizes modal flexibilities reconstructed from measured modal parameters. A rigorous system of equations governing damage and curvature of modal flexibility is derived in the context of elasticity. To solve the resulting system of governing equations, an efficient pseudo-inverse technique is introduced. The direct inspection of the resulting solutions provides the location and severity of damage in a curved thin beam. This study confirms that there is a strong linear relationship between the curvature of modal flexibility and flexural damage in the selected class of structures. Several numerical case studies are provided to justify the performance of the proposed approach. The proposed method introduces a way to avoid the singularity and mode selection problems from earlier attempts.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.184-195
• /
• 2017

Baseball is a life sport that gives vitality to people. However, currently available leg guards do not have a variety of sizes and it is very difficult to purchase a leg guard that is suitable for the size of a specific consumer. Therefore, this study investigated the size system of a leg guard sold in the market and suggested a grading deviation suitable for the legs of Korean males. The results of the study were as follows. First, most brands were sold only in three size systems as children's, teenagers, and adults. Adult size systems were not subdivided. Second, Korean male legs were classified into Group 1 (large girth and height and lower body muscle) and Group 2 (small girth and height and low underbody muscle). Third, the size system is based on vertical items such as height and mid-thigh circumference. Each group produced 10 sizes. The smallest height or the largest height was also found to be about 4.5 to 5.0cm smaller or larger than the sample size for each group. The total length of the leg guard was about 2.5cm when the height was increased or decreased by one size. It was confirmed that the deviation of the circumference of the mid-thigh should be about 2.0cm larger or smaller than the sample size even if the height is the same. The deviation of the knee circumference and ankle circumference was smaller than the other circumference. In conclusion, the dimension combinations of the leg guard must be set differently to provide a leg guard with high size suitability according to leg type.

• 패션비즈니스
• /
• 제8권1호
• /
• pp.1-15
• /
• 2004

The purpose of this study is to provide for some basic data useful to production of the apparels fit and measured well for the Chinese men. For this purpose, Chinese men's apparel measurements and specifications were determined per area group(Beijing/ Shanghai) according to the Men's Wear Specifications (GB/T 1335.1-1997), National Standards of People's Republic of China. The collected data were statistically processed using SAS 6.12 for technical statistical analysis, correlation analysis, factor analysis, group-wise analysis and ANOVA. The results of this study can be summarized as follows; 1. As a result of dividing the Chinese men into Beijing and Shanghai men and thereby, setting height and upper chest circumference for upper garments and height and waist for lower garments. 2. Analyzing the correlations according to the three-fold classifications of height/upper chest circumference/waist for garment specifications, 17 specifications based on heights and upper chest circumferences for Beijing men's upper garments could be designed within the deviation level of 2%, while 15 specifications based on waist measurements could be designed (between $70{\sim}98cm$) for their lower garments within the deviation level of 4%. Thus, a total of 60 combinations of the specifications could be obtained. 3. 16 specifications based on heights and upper chest circumferences for Shanghai men's upper garments could be designed within the deviation level of 2%, while 16 specifications based on waist measurements could be designed (between $68{\sim}98cm$) for their lower garments within the deviation level of 3%. Thus, a total of 56 combinations of the specifications could be obtained. For other reference measurements, grading measures were set for each type and body part, while the average measures of major body parts were calculated.

• 복식문화연구
• /
• 제13권5호
• /
• pp.671-685
• /
• 2005

The purpose of this study was to develop a new size range and size interval for early adolescent girls. For this purpose, a total of 529 girls aged between 10 and 14 were measured and data were collected from 42 anthropometric measurements and 41 photographic measurements per a person. SAS 8.1 was used in data analysis including means, standard deviations, and frequency analysis. The stature was divided at 5cm intervals as in KS into 9 sizes from the lowest 130cm to the highest 171cm. If waist circumference were divided at the same intervals, the sizes cannot reflect the body growth of adolescent girls at these ages. Thus this study set intervals between sizes irregularly based on the mean of waist circumference by the type of body shape. Based on the results, this study proposed: for Type A - 6 sizes (140A-58, 145A-54, 145A-62, 150A-58, 150A-62, 155A-62); for Type X- 9 sizes (150X-59, 155X-63, 155X-66, 160X-59, 160X-63, 160X-66, 165X-59, 165X-63, 165X-66): and for Type H - 7 sizes (145H-68, 150H-68, 150H-70, 155H-68, 155H-73, 160H-68, 160H-73). For the sizes selected for each type, reference measurements were decided - centering on items necessary for manufacturing clothes. Reference measurements suggested for lower garments 8 items including waist circumference, hip circumference, slacks length and crotch length. The suggested sizes are distributed in a wider range, so they are considered to be helpful for students to find clothes fitting their bodies.

• 한국의류학회지
• /
• 제42권2호
• /
• pp.211-223
• /
• 2018

In global apparel product development, flat is one of the most important key factor for technical design communication. Proportionally correct flats based on correct scaled human body figures are imperative to be successful in the fashion business. In this study the researchers were to develop body templates for flats for Korean women body types using data from 'Size Korea 2004 (5th)', which is a Korean government apparel sizing project to analyze women's body measurements (age range 7-49). We measured 13 height measurements, 6 width measurements, 8 circumference measurements, 6 length measurements, 3 angle measurements and 5 body measurements. A body figure (i.e., schema) for each group was created by Pattern Design Software (PAD) System 4.1. Muscle was added to the schema created by Adobe Illustrator to ensure a better visualization and convenience for industry uses for flats. Developed body figure template of representative type had the largest difference in height level compared to exiting figures. It had a bigger head, lower crotch level, and longer crotch depth and hip length than existing figures.

• 패션비즈니스
• /
• 제8권3호
• /
• pp.84-113
• /
• 2004

The purpose of this study is to provide for some basic data useful to production of the apparels fit and measured well for the Chinese men. For this purpose, Chinese men's apparel measurements and specifications were determined per area group(Beijing and Shanghai) according to the Men's Wear Specifications (GB/T 1335.1-1997), National Standards of People's Republic of China. The results of this study can be summarized as follows; 1. As a result of dividing the Chinese men into Beijing and Shanghai men and thereby, setting stature and upper chest circumference for upper garments and stature and waist for lower garments. 2. As a result of analyzing the correlational distributions of stature and upper chest circumference measurements by region (Beijing and Shanghai) and type of physique, it was found that the coverage rate of the selected sizes was higher in Shanghai sample than Beijing sample in case of the sample with thicker waist circumferences. 3. As a results of analyzing the correlations according to the three-fold classifications of stature /upper chest circumference/waist for garment specifications by region (Beijing and Shanghai) and type of physique, "A" type was most covered, followed by "B", "C" and "Y" types.

• 패션비즈니스
• /
• 제12권4호
• /
• pp.56-72
• /
• 2008

The purpose of this study was to provide with the useful fundamental data by developing the appearl sizing system according to body types for the Women's Wear Specifications(GB/T 1335.2-1997), National Standards of People's Republic of China. Thus, it was to improve of the garment fit and coverage rate for the apparel production assortment and stock of exporting domestic clothing to China. For this study, 581 female women aged in their twenties who lived in Beijing and Shanghai were selected for the development of the apparel sizing system who resident in Beijing and Shanghai in China. As for the method of this study was made three primary items(length, bust girth, waist girth) and seven secondary items. Data analysis were processed by SPSS WIN 10.0 Program was used. The research selected 3 major body measurements, such as stature, bust girth, waist girth and 7 secondary measurements to investigate the body features of the Chinese adult women. The data throughout the study were analyzed by using SPSS WIN version 10.0 S/W. The result were as follows: The clothes dimensions for upper and lower body and the coverage rate of body size that had the highest appearance ratio from the selected age group in 20's were: Y-type 160-84 155-64(5.9%) and the section 160cm 22.6%, A-type 160-80 160-62(39%) and the section 160cm 27.9%, B-type 155-80 155-66(6.2%) and the section 160cm 24.7%. The representative size codes of the Chinese adult women aged in their 20's were set for representing certain body dimensions such as 150-76A 150-60A(0.0%), 155-80A 155-64A(2.4%), 160-84A 160-68A(3.9%), 165-88A 165-72A(0.3%), 170-92A 170-76A(0.0%). The production coverage rates for the each representative size codes were S size the section 150cm 1.5%, M size the section 155cm 15.3%, L size the section 160cm 36.0%, XL size the section 165cm 29.7%, XXL size the section 170cm 11.4% that covered 93.9%.

• 복식문화연구
• /
• 제19권6호
• /
• pp.1150-1162
• /
• 2011

Considering the fact that the fit for men's clothes is important for the sizing system modern ready-made pants, an analysis of obese middle-aged men is required at this period of time to determine the appropriate fit for obese men. The following research focused on 635 middle-aged obese men who had a BMI index of at least 25 and a waist circumference from the belly-button level of 34 inches or more. This research deals with the articles of circumference, thickness and other major physical changes that happen during the 30s, 40s, and 50s. According to the analysis of these body measurement articles with specific regard to age, men's height and the height of their waist seemed to decrease as their age increased. This demonstrates that as these men grow older, the waist and stomach slowly curved into a circular and flat body type due to their obesity. In this study, the first factor figure was the height and leg length. The second factor figure was the waist form. The third factor figure was the center thigh circumference. The fourth and fifth factor figures were the hip length and shape. Lastly, the sixth factor figure was the calf circumference. These 6 factor figures construct 80.57% of the volume explanation and showed 3 patterns through a cluster analysis that showed different patterns of obesity forms for waist circumferences in key figure 1, waist and thigh circumferences in key figure 2, and waist and buttocks circumferences. Therefore, it was worthwhile to consider the circumferences of the waist, buttocks and thigh according to the body type category to enhance the drafting of well-fitting pants.

• 한국전산구조공학회논문집
• /
• 제24권5호
• /
• pp.473-480
• /
• 2011

반복적인 구조해석의 실행없이 부재 변위 기여도를 이용하여 부재 사이즈를 조절함으로써 건물의 변위를 만족시키는 재분배 기법은 실용적인 변위 설계법으로 인식되고 있다. 기존 연구에서 재분배 기법은 풍하중, 지진하중과 같은 횡하중을 받는 건물의 횡변위를 탄성범위 내에서는 효과적으로 제어할 수 있었으나, 재분배 기법에 따른 비탄성 성능 변화에 대한 연구는 미흡하였다. 본 연구에서는 재분배 기법에 의해 재설계된 구조물의 비탄성 성능변화를 확인하기 위해 7층 철근 콘크리트 전단벽-골조 시스템 예제에 재분배 기법을 적용하였다. 재분배 적용결과, 전단벽-골조 시스템의 상호작용 특성때문에 하층부에서는 전단벽의 물량이 증가하고 상층부에서는 골조의 물량이 증가하였다. 이러한 물량 재분배를 통해 초기 강성은 증가하였으며 연성 성능은 비슷한 수준으로 나타났다.

• 산업경영시스템학회지
• /
• 제39권2호
• /
• pp.19-27
• /
• 2016

Maritime transport is now regarded as one of the main contributors to global climate change by virtue of its $CO_2$ emissions. Meanwhile, slow steaming, i.e., slower ship speed, has become a common practice in the maritime industry so as to lower $CO_2$ emissions and reduce bunker fuel consumption. The practice raised various operational decision issues in terms of shipping companies: how much ship speed is, how much to bunker the fuel, and at which port to bunker. In this context, this study addresses an operation problem in a shipping companies, which is the problem of determining the ship speed, bunkering ports, and bunkering amount at the ports over a given ship route to minimize the bunker fuel and ship time costs as well as the carbon tax which is a regulatory measure aiming at reducing $CO_2$ emissions. The ship time cost is included in the problem because slow steaming increases transit times, which implies increased in-transit inventory costs in terms of shippers. We formulate the problem as a nonlinear lot-sizing model and suggest a Lagrangian heuristic to solve the problem. The performance of the heuristic algorithm is evaluated using the data obtained from reliable sources. Although the problem is an operational problem, the heuristic algorithm is used to address various strategic issues facing shipping companies, including the effects of bunker prices, carbon taxes, and ship time costs on the ship speed, bunkering amount and number of bunkering ports. For this, we conduct sensitivity analyses of these factors and finally discuss study findings.