• 마이크로전자및패키징학회지
• /
• 제24권3호
• /
• pp.57-62
• /
• 2017

하이드로퀴논 환원제를 사용하는 무전해 은도금 방법으로 은(Ag)코팅 구리(Cu) 플레이크를 제조하는 공정에서 전처리 용액, 반응온도, pH, Ag 도금액 조성 및 주입속도, 펄프농도 등 여러 변수를 변화시켜가며 우수한 품질의 Ag 코팅이 형성되는 공정조건들을 확보하였다. Cu 플레이크 표면의 산화층을 제거하기 위한 효과적인 전처리 용액이 제시되었고, 낮은 반응온도, 4.34 수준의 pH값, 느린 Ag 도금액 주입속도, Ag 도금액에서 증류수 제거, 높은 펄프농도 조건에서 분리형 미세 Ag 입자들의 생성이 억제되고, Cu 표면 커버리지가 우수한 Ag 코팅층이 형성됨을 확인할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.150-150
• /
• 2016

Mankind is enjoying a great convenience of their life by the rapid growth of secondary industry since the Industrial Revolution and it is possible due to the invention of huge power such as engine. The automobile which plays the important role of industrial development and human movement is powered by the Engine Module, and especially Diesel engine is widely used because of mechanical durability and energy efficiency. The main work mechanism of the Diesel engine is composed of inhalation of the organic material (coal, oil, etc.), combustion, explosion and exhaust Cycle process then the carbon compound emissions during the last exhaust process are essential which is known as the major causes of air pollution issues in recent years. In particular, COx, called carbon oxide compound which is composed of a very small size of the particles from several ten to hundred nano meter and they exist as a suspension in the atmosphere. These Diesel particles can be accumulated at the respiratory organs and cause many serious diseases. In order to compensate for the weak point of such a Diesel Engine, the DPF(Diesel Particulate Filter) post-cleaning equipment has been used and it mainly consists of ceramic materials(SiC, Cordierite etc) because of the necessity for the engine system durability on the exposure of high temperature, high pressure and chemical harsh environmental. Ceramic Material filter, but it remains a lot of problems yet, such as limitations of collecting very small particles below micro size, high cost due to difficulties of manufacturing process and low fuel consumption efficiency due to back pressure increase by the small pore structure. This study is to test the possibility of new structure by direct infiltration of SiC Whisker on Carbon felt as the next generation filter and this new filter is expected to improve the above various problems of the Ceramic DPF currently in use and reduction of the cost simultaneously. In this experiment, non-catalytic VS CVD (Vapor-Solid Chemical Vaporized Deposition) system was adopted to keep high mechanical properties of SiC and MTS (Methyl-Trichloro-Silane) gas used as source and H2 gas used as dilute gas. From this, the suitable whisker growth for high performance filter was observed depending on each deposition conditions change (input gas ratio, temperature, mass flow rate etc.).

• 한국수소및신에너지학회논문집
• /
• 제17권1호
• /
• pp.62-68
• /
• 2006

High temperature electrolysis is a promising technology to produce massively hydrogen using renewable and nuclear energy. Solid oxide fuel cell materials are candidates as the components of steam electrolysers. However, the polarization characteristics of the typical electrode materials during the electrolysis have not been intensively investigated. In this study, NiO electrode was deposited on YSZ electrolyte by spin coat process and firing at $1300^{\circ}C$. Pt electrode was applied on the other side of the electrolyte to compare the polarization characteristics with those by NiO during electrolysis. The $H_2$ evolution rate was also monitored by measuring the electromotive force of Lambda probe and calculated by thermodynamic consideration. At low current density, Pt showed lower cathodic polarization and thus higher current efficiency than Ni, but the oxidation of Ni into NiO caused the increase of anodic resistance with increasing current density. High overpotential induced high power consumption to produce hydrogen by electrolysis.

• Composites Research
• /
• 제27권4호
• /
• pp.123-129
• /
• 2014

세라믹 기지 복합재료는 세라믹 기지에 고 용융 온도, 낮은 밀도, 고 탄성과 강도를 가진 탄화물, 질화물, 보론화물, 산화물 등의 강화재료를 끼워 넣어 파괴 인성을 높인 것이다. 이들 소재는 우주 비행체의 열 차폐 시스템, 또 고온의 가스 터빈의 연소실, 터빈 블레이드, 고정자(Stator) 베인 등의 부품에 사용되며, 버너와 화염 유지기(Flame holder), 고온 가스 덕트에는 산화 CMC가 사용되고 있고, 극심한 열 충격이 일어나는 브레이크 디스크나 시스템의 부품, 그리고 슬라이드 베어링 부품에도 활용되고 있다. 이러한 CMC에 대한 연구 개발은 미국의 우주 비행체 활용 목적을 비롯하여, 미국, 일본, 유럽에서의 초고속항공기와 가스 터빈용, 그리고 핵 융합용 등의 목적으로 국방과 에너지 산업과 같은 전략적 분야의 활용을 목표로 개발되고 있다.

• Journal of Astronomy and Space Sciences
• /
• 제31권4호
• /
• pp.325-333
• /
• 2014

We are motivated by both the accumulating evidence for the connection of solar variability to the chemistry of nitrogen oxide in the atmosphere and recent finding that the Galactic cosmic-ray (GCR) influx is associated with the solar north-south asymmetry. We have analyzed the measured pH in precipitation over the 109 stations distributed in the United States. We have found that data of pH in precipitation as a whole appear to be marginally anti-correlated with the solar asymmetry. That is, rain seems to become less acidic when the southern hemisphere of the Sun is more active. The acidity of rain is also found to be correlated with the atmospheric temperature, while not to be correlated with solar activity itself. We have carried on the analysis with two subsamples in which stations located in the east and in the west. We find that the pH data derived from the eastern stations which are possibly polluted by sulfur oxides and nitrogen oxides are not correlated with the solar asymmetry, but with the temperature. On the contrary, the pH data obtained from the western stations are found to be marginally anti-correlated with the solar asymmetry. In addition, the pH data obtained from the western stations are found to be correlated with the solar UV radiation. We conclude by briefly pointing out that a role of the solar asymmetry in the process of acidification of rain is to be further examined particularly when the level of pollution by sulfur oxides and nitrogen oxides is low.

• 한국세라믹학회지
• /
• 제41권2호
• /
• pp.151-157
• /
• 2004

안정한 산화물 세라믹스 재료로서 mullite와 cordierite는 우수한 열적, 화학적 특성 때문에 구조재료에서부터 전자재료에 이르는 폭넓은 용도에 사용되어지고 있다. 그럼에도 불구하고, mullite는 천연에서는 산출되지 않기 때문에 합성에 의해서만 제조되고 있다. 또한, cordierite는 합성온도폭이 좁아 고순도의 미립 분말을 제조하기 어려운 재료이다. Mullite 역시 고상반응법 등의 합성법으로는 균질한 재료로의 합성이 어렵다. 그렇기 때문에 sol-gel법 등의 다양한 합성법에 의해 이들 재료에 관한 연구가 계속되고 있다. 본 연구에서는 국내의 원료를 이용하여 sol-gel법에서와 같은 고순도의 미립의 분말을 좀 더 낮은 온도에서 합성이 가능하며, 상대적으로 저가의 원료를 사용함으로서 경제적인 방법인 PVA를 polymer carrier로서 이용한 solution-polymerzation 합성법에 의해 mullite와 cordierite를 합성하였다. 그 결과, mullite, cordierite는 각각 120$0^{\circ}C$, 125$0^{\circ}C$에서 단일의 결정상이 생성되었으며 비표면적 20$m^2$/g 이상의 미립의 분말이 생성됨을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제11권2호
• /
• pp.111-120
• /
• 1998

In this paper, the $(SrPb)(CaMg)TiO_3$ ceramics with paraelectric properties were fabricated by the mixed oxide method. It was investigated that which the variation of contents of $Bi_2O_3{\cdot}3TiO_2$ effects on structural, dielectrical and electrical properties of specimens. As a result, the grain size were grown with increasing the contents of $Bi_2O_3{\cdot}3TiO_2$. The relative dielectric constants were increased up to 4[mol%] of $Bi_2O_3{\cdot}3TiO_2$, and decreased more or less at a low temperature in the specimens which had more than. But the temperature coefficient. of capacitance were showed ${\pm}25$[%]. The dielectric loss were less than 0.05 in all specimens which had more than 4[mol%] of $Bi_2O_3{\cdot}3TiO_2$. In order to investigate the behavior of charged particles, the characteristics of electrical conduction were measured. As a result, the conduction current was divided into the three steps as a function of DC electric field. The first step was Ohmic region due to ionic conduction, below 15[kV/cm]. The second step was showed a saturation which seems to be related to a depolarizing field occuring in field-enforced ferroelectric phase, between 15[kV/cm] and 40[kV/cm]. The third step was attributed to Child's law related to space charge which injected from electrode, above 40[kV/cm].

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.19.2-19.2
• /
• 2010

Printed electronics using printing process has broadened in all respects such as electrics (lighting, batteries, solar cells etc) as well as electronics (OLED, LCD, E-paper, transistor etc). Copper is considered to be a promising alternative to silver for printed electronics, due to very high conductivity at a low price. However, Copper is easily oxidized, and its oxide is non-conductive. This is the highest hurdle for making copper inks, since the heat and humidity that occurs during ink making and printing simply accelerates the oxidation process. A variety of chemical treatments including organic capping agents and metallic coating have been used to slow this oxidation. We have established synthetic conditions of copper nanoparticles (CuNPs) which are resistant to oxidation and average diameter of 20 to 50nm. Specific resistivity should be less than $4\;{\mu}{\Omega}{\cdot}cm$ when sintered at lower temperature than $250^{\circ}C$ to be able to apply to conductive patterns of FPCBs using ink-jet printing. Through this study, the parameters to control average diameter of CuNPs were found to be the introduction of additive agent, the feeding rate of reducing agent, and reaction temperature. The CuNPs with various average diameters (58, 40, 26, 20nm) could be synthesized by controlling these parameters. The dispersed solution of CuNPs with an average size of 20 nm was made with nonpolar solvent containing 3 wt% of binder, and then coated onto glass substrate. After sintering the coated substrates at $250^{\circ}C$ for 30 minutes in nitrogen atmosphere, metallic copper film resulted in a specific resistivity of $4.2\;{\mu}{\Omega}{\cdot}cm$.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.766-772
• /
• 1996

Undoped $SnO_x$ thin films were deposited on Si(100) substrate by using reactive ioassisted deposition technique (R-IAD). In order to investigate the effect of initial oxygen content and heat treatment on the oxidation state and crystalline structure of tin oxide films, $SnO_x$ thin films were post-annealed at 400~$600^{\circ}C$ for 1 hr. in a vacuum ~$5 \times 10^{-3}$ -3/ Torr or were directly deposited on the substrate of $400^{\circ}C$ and the relative arrival ration ($Gamma$) of oxygen ion to Sn metal varied from 0.025 to 0.1, i.e., average impinging energy ($E_a$) form 25 to 100 eV/atom. As $E_a$ increased, the composition ratio of $N_ON{sn}$ changed from 1.25 to 1.93 in post-annealing, treatment and 1.21 to 1.87 in in-situ substrate heating. In case of post-annealing, the oxidation from SnO to $SnO_2$ was closely related to initial oxygen contents and post-annealing temperature, and the perfect oxidation of $SnO_2$ in the film was obtained at higher than $E_a$=75 eV/atom and $600^{\circ}C$. The temperature for perfect oxidation of $SnO_2$ was reduced as low as $400^{\circ}C$ through in-situ substrate heating. The variation of the chemical state of $SnO_x$ thin films with changing $E_a$'s and heating method were also observed by Auger electron spectroscopy.

• 한국화재소방학회논문지
• /
• 제21권1호
• /
• pp.90-97
• /
• 2007

주거공간에 사용되는 벽지의 화재 위험성을 평가하기 위하여 몇 종류의 벽지 시료에 대한 연소특성과 연소가스의 독성을 분석하였다. 본 연구에서 재의 잔량은 고온의 전기로를 이용하여 측정하였으며 TGA를 이용하여 열적 특성을 분석하였다. 연소시간과 연기농도의 측정은 콘히터와 가스분석계를 사용하였고 연기밀도는 ASTM E662의 장치를 이용하였다. 실험결과 실크벽지는 다른 벽지에 비해 낮은 온도에서 열분해가 시작되었는데 이는 실크벽지가 낮은 열유속(heat flux)에서도 착화될 수 있으므로 다른 벽지보다 화재 위험성이 높다. 실크벽지의 복사 열유속에 의한 착화시간은 다른 시료들에 비해 짧아서 화재 시 피난 시간이 짧아져야 하며 비닐이 코팅된 실크벽지 연소 시 일산화탄소의 발생 농도가 가장 높아서 독성의 위험이 높을 것으로 보인다. 실크벽지와 실크방염 벽지의 비닐 코팅으로 연기밀도가 높게 나타났다.