• 제목/요약/키워드: low-dropout

검색결과 60건 처리시간 0.019초

잡음 제거 회로를 이용한 LDO 레귤레이터 (Low Drop Out Regulator with Ripple Cancelation Circuit)

  • 김채원;권민주;정준모
    • 전기전자학회논문지
    • /
    • 제21권3호
    • /
    • pp.264-267
    • /
    • 2017
  • 본 논문에서는 잡음 제거 회로를 이용하여 공급 전원 제거 비를 향상시킨 LDO(Low drop-out) 레귤레이터를 제안하였다. LDO 레귤레이터 내부의 오차증폭기와 패스 트랜지스터 사이에 잡음 제거 회로를 두어 전압 라인에서 들어오는 노이즈에 패스 트랜지스터가 받는 영향을 줄일 수 있게 설계하였으며, 기존의 LDO 레귤레이터와 동일한 레귤레이션 특성을 갖도록 했다. 제안한 회로는 0.18um 공정을 사용하였고 Cadence의 Virtuoso, Spectre 시뮬레이터를 사용하였다.

효율적 버퍼 주파수 보상을 통한 LDO 선형 레귤레이터 (LDO Linear Regulator Using Efficient Buffer Frequency Compensation)

  • 최정수;장기창;최중호
    • 대한전자공학회논문지SD
    • /
    • 제48권11호
    • /
    • pp.34-40
    • /
    • 2011
  • 본 논문은 낮은 출력 저항을 버퍼를 사용하여 주파수 보상을 수행한 LDO 선형 레귤레이터에 관한 것이다. 주파수 보상을 위해 제안하는 버퍼는 두 개의 shunt 피드백 루프를 사용하여 출력 저항을 최소화함으로써 이를 통해 LDO 선형 레귤레이터 전체의 부하 및 입력 전압에 따른 레귤레이션 성능을 개선할 수 있고 저전압에서도 낮은 출력 저항을 유지함으로 휴대기기 응용에 있어서도 적합하다. 또한 외부 디지털 제어를 통한 LDO 선형 레귤레이터의 출력 전압을 가변함으로써 외부 MCU와의 인터페이스를 개선하기 위한 기준 전압 제어 기법을 나타내었다. 구현된 LDO 선형 레귤레이터는 2.5V~4.5V의 입력 전압에 대하여 동작하며 최대 300mA의 부하 전류를 0.6~3.3V의 출력 전압에 대하여 제공할 수 있다.

A High Current Efficiency CMOS LDO Regulator with Low Power Consumption and Small Output Voltage Variation

  • Rikan, Behnam Samadpoor;Abbasizadeh, Hamed;Kang, Ji-Hun;Lee, Kang-Yoon
    • 전기전자학회논문지
    • /
    • 제18권1호
    • /
    • pp.37-44
    • /
    • 2014
  • In this paper we present an LDO based on an error amplifier. The designed error amplifier has a gain of 89.93dB at low frequencies. This amplifier's Bandwidth is 50.8MHz and its phase margin is $59.2^{\circ}C$. Also we proposed a BGR. This BGR has a low output variation with temperature and its PSRR at 1 KHz is -71.5dB. For a temperature variation from $-40^{\circ}C$ to $125^{\circ}C$ we have just 9.4mV variation in 3.3V LDO output. Also it is stable for a wide range of output load currents [0-200mA] and a $1{\mu}F$ output capacitor and its line regulation and especially load regulation is very small comparing other papers. The PSRR of proposed LDO is -61.16dB at 1 KHz. Also we designed it for several output voltages by using a ladder of resistors, transmission gates and a decoder. Low power consumption is the other superiority of this LDO which is just 1.55mW in full load. The circuit was designed in $0.35{\mu}m$ CMOS process.

Changes in Gait Patterns after Physical Therapy in Patients with Non-specific Chronic Low Back Pain: a Pilot Study

  • Song, Seonghyeok;Cho, Namjeong;Kim, Hyun-Joong
    • Physical Therapy Rehabilitation Science
    • /
    • 제11권1호
    • /
    • pp.105-112
    • /
    • 2022
  • Objective: Nonspecific low back pain (NS-LBP) causes pain and disability, affecting the neuromuscular system and altering gait patterns. The purpose of this study is to investigate the effect of improvement of low back pain symptoms through physical therapy on foot pressure and spatiotemporal gait parameters. Design: A pilot study. Methods: Participants received manual therapy and supervised therapeutic exercise, which consisted of 12 sessions for 6 weeks. Participants were assessed for pain intensity (a numeric pain rating scale), disability index (oswestry disability index), and spatiotemporal gait parameters before and after intervention. Wilcoxon signed rank test was used to analyze the before-and-after differences in a single group. Results: All seven NS-LBP patients completed the study without dropout. After six weeks of physical therapy, the numeric pain rating scale and oswestry disability index showed significant improvement (Z= -2.388, P=0.017). There was no significant improvement in both static and dynamic conditions in foot pressure (P>0.05). However, in the spatiotemporal gait parameters, there were significant differences in all variables except the right stance phase and left mid stance (P<0.05). Conclusions: In our pilot study, 12 sessions of physical therapy in NS-LBP patients improved gait quilty in spatiotemporal gait parameters. Similarly, it has resulted in clinically positive improvements in pain and disability.

소아 성대 결절에 대한 음성 치료의 효과 (Efficacy of Voice Therapy for Children with Vocal Nodules)

  • 소윤경
    • 임상이비인후과
    • /
    • 제29권2호
    • /
    • pp.229-234
    • /
    • 2018
  • Background and Objectives : Vocal nodules occur with a 12-22% prevalence in pediatric populations. Most otolaryngologists recommend voice therapy as the primary treatment. The aim of this study is to evaluate patient compliance with voice therapy and its effect on vocal nodules in children. Materials and Methods : We retrospectively reviewed 44 pediatric patients between 3 and 11 years old diagnosed with vocal nodules between March 2015 and December 2017. We evaluated the treatment adoption rate, dropout rate during voice therapy, and reasons for dropout. For patients who completed voice therapy, we measured the changes in nodule size, perceptual parameters, and acoustic parameters. We evaluated patient satisfaction using the pediatric voice handicap index (P-VHI). Results : Of the 44 pediatric patients diagnosed with vocal nodules, 22 (50%) agreed to voice therapy. Of the 22 patients who started voice therapy, 5 (22.7%) dropped out during therapy because they were unsatisfied with their treatment. Another 4 patients discontinued therapy for reasons unrelated to treatment effectiveness. Vocal nodule disappeared or decreased in all 13 patients who completed voice therapy. All voice parameters were improved and statistically significant changes were observed in perceptual, acoustic, and P-VHI parameters. Conclusions : Although compliance to voice therapy among the pediatric patients with vocal nodules was low, there were significant improvements in voice parameters for those who completed voice therapy. A change toward a positive perception of voice therapy is necessary and a multidisciplinary approach is needed to improve the effect of voice therapy on pediatric patients with vocal nodules.

자기 조절 개념을 적용한 음성치료 기법이 발성장애 환자에게 미치는 효과 (The Effect of Voice Therapy Applying Self-Regulation Concepts on Dysphonia Patients)

  • 이창윤;안수연;손희영
    • 대한후두음성언어의학회지
    • /
    • 제30권1호
    • /
    • pp.15-20
    • /
    • 2019
  • Background and Objectives : The goal of this study is to present a strategy for improving the self-regulation (SR) ability and facilitating the change of vocal behavior by applying voice therapy using the SR concept to the patients with vocal cord nodule and muscle tension dysphonia. Materials and Method : The subjects were 80 patients and 80 patients who were diagnosed with muscle tension dysphonia and vocal nodules. As a control group, the results were compared among patients with the same dysphonia without using SR strategies. The concept of SR before voice therapy was explained to the patients, and the treatment was divided into three stages according to the goal of voice therapy. The treatment stages consist of 1) skill acquisition, 2) habit formation, and 3) habit changes. voice therapy was performed by applying SR strategies such as goal implementation intentions and a less routine behavior. Patient's dropout rates were measured to compare the adherence of voice therapy. Results : Significant improvement was seen in all groups receiving voice therapy. However, in the group using the SR strategy, the voice analysis results showed a relatively low dropout rate of voice therapy. In the generalization confirmation stage, patients who applied SR concept showed better results. SR strategy did no longer be necessary to maintain newly adopted vocal behavior. Conclusion : The results of this study show that SR is one of the cognitive factors that can have a significant impact on the outcome of voice therapy, and also has a positive impact on the acquisition and generalization of new skills. A better understanding of SR and the development of therapeutic strategies using it will play an important role in solving voice problems in clinical settings.

Design of a High Dynamic-Range RF ASIC for Anti-jamming GNSS Receiver

  • Kim, Heung-Su;Kim, Byeong-Gyun;Moon, Sung-Wook;Kim, Se-Hwan;Jung, Seung Hwan;Kim, Sang Gyun;Eo, Yun Seong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제4권3호
    • /
    • pp.115-122
    • /
    • 2015
  • Global Positioning System (GPS) is used in various fields such as communications systems, transportation systems, e-commerce, power plant systems, and up to various military weapons systems recently. However, GPS receiver is vulnerable to jamming signals as the GPS signals come from the satellites located at approximately 20,000 km above the earth. For this reason, various anti-jamming techniques have been developed for military application systems especially and it is also required for commercial application systems nowadays. In this paper, we proposed a dual-channel Global Navigation Satellite System (GNSS) RF ASIC for digital pre-correlation anti-jam technique. It not only covers all GNSS frequency bands, but is integrated low-gain/attenuation mode in low-noise amplifier (LNA) without influencing in/out matching and 14-bit analogdigital converter (ADC) to have a high dynamic range. With the aid of digital processing, jamming to signal ratio is improved to 77 dB from 42 dB with proposed receiver. RF ASIC for anti-jam is fabricated on a 0.18-μm complementary metal-oxide semiconductor (CMOS) technology and consumes 1.16 W with 2.1 V (low-dropout; LDO) power supply. And the performance is evaluated by a kind of test hardware using the designed RF ASIC.

FVF-Based Low-Dropout Voltage Regulator with Fast Charging/Discharging Paths for Fast Line and Load Regulation

  • Hinojo, Jose Maria;Lujan-Martinez, Clara;Torralba, Antonio;Ramirez-Angulo, Jaime
    • ETRI Journal
    • /
    • 제39권3호
    • /
    • pp.373-382
    • /
    • 2017
  • A new internally compensated low drop-out voltage regulator based on the cascoded flipped voltage follower is presented in this paper. Adaptive biasing current and fast charging/discharging paths have been added to rapidly charge and discharge the parasitic capacitance of the pass transistor gate, thus improving the transient response. The proposed regulator was designed with standard 65-nm CMOS technology. Measurements show load and line regulations of $433.80{\mu}V/mA$ and 5.61 mV/V, respectively. Furthermore, the output voltage spikes are kept under 76 mV for 0.1 mA to 100 mA load variations and 0.9 V to 1.2 V line variations with rise and fall times of $1{\mu}s$. The total current consumption is $17.88{\mu}V/mA$ (for a 0.9 V supply voltage).

A Deep Learning Approach for Classification of Cloud Image Patches on Small Datasets

  • Phung, Van Hiep;Rhee, Eun Joo
    • Journal of information and communication convergence engineering
    • /
    • 제16권3호
    • /
    • pp.173-178
    • /
    • 2018
  • Accurate classification of cloud images is a challenging task. Almost all the existing methods rely on hand-crafted feature extraction. Their limitation is low discriminative power. In the recent years, deep learning with convolution neural networks (CNNs), which can auto extract features, has achieved promising results in many computer vision and image understanding fields. However, deep learning approaches usually need large datasets. This paper proposes a deep learning approach for classification of cloud image patches on small datasets. First, we design a suitable deep learning model for small datasets using a CNN, and then we apply data augmentation and dropout regularization techniques to increase the generalization of the model. The experiments for the proposed approach were performed on SWIMCAT small dataset with k-fold cross-validation. The experimental results demonstrated perfect classification accuracy for most classes on every fold, and confirmed both the high accuracy and the robustness of the proposed model.

복합소재를 이용한 저가형 3kW 소수력 발전시스템 개발 (Developed Low-priced 3kW Small Hydro Power Generation System using Composite Material)

  • 소병문;김성희;한우용
    • 반도체디스플레이기술학회지
    • /
    • 제17권1호
    • /
    • pp.84-87
    • /
    • 2018
  • As the propeller end speed increases, the propeller surface is damaged in the process of bubble formation and dropout. It is intended to prevent the corrosion of the propeller by modifying the shape of the end through the winglet structure to mitigate the cavitation phenomenon. In the case of conventional SUS materials, the cost of production is so high that plastic materials are used to prevent corrosion. This paper aims to mitigate the cavitation by deforming the shape of the end through the winglet structure by using the SMC composite material of the propeller using the existing SUS.